Reda El Shenawey,PMP®

Experience

• 

  ENGINEERING OFFICE FOR COMPLEMENTARY DESIGNS

  Nov 2005 - Jan 2007

  Electrical Designer

  Design various lighting layouts and specifications for alllighting fixtures. Skilled in interior and exterior lighting layouts, calculations,specifications, and all phases of the lighting design process. Lighting, power system, Emergency Lighting, Sound system,Fire Alarm system,and Cable network. Familiar with design software DIALux Evo and AutoCAD

• 

  Ministry of Electricity and Renewable Energy

  Mar 2007 - Aug 2011

  TESTING AND COMMISSIONING ENGINEER

  Testing Numerical & Electromechanical protection relays. Performing the testing all protection relays for (Steam and Gasturbine Generator, Transformer-BB., SWGR and Motors) e.g.(Differential Protection, Over Current Protection, OverVoltage,Earth Fault, Negative Phase Sequence, Under/OverFrequency and Reverse Power,…….). Performing the Testing of current- and voltagetransformers(Polarity test, Ratio test, Knee Point test,insulation resistance test,..etc.) Performing the testing Circuit Breakers for different Voltage(220k.v - 66 k.v-11k.v).( contact resistance ,Trip/ close time,Dew point testing ……). Power &Aux. transformer testing (turns ratio , tan delta,winding resistance, vector group, calibration tempindicator…….).Led the team on an overhaul to perform a major and routineinspection -testing for (G.E.)Steam and Gas turbine Generator Insulation resistance test for Generator (Stator,Rotor and Exciter). Generator exciter testing and calibration Test Generator (RTD), RTD insulation test. D.C. resistance test for Stator and Rotor. Wedge tapping test for the Stator. Inspect the end winding region of the Stator. Crakes test for Rotor retaining ring. Check and Calibrate excitation system with (Brushes –Brushless)(AVR system – rotating diodes) Carrying out maintenance for low voltage motors ( M.C.C). Conducting research, performing diagnostics, andtroubleshooting all generation plant equipment. عرض أقل

• 

  Al ESSA COMPANY FOR TRADING AND CONTRACTING

  Aug 2011 - Aug 2013

  Senior Electrical Engineer

  Led Commissioning Engineers teams on an overhaul Testing and commissioning of the Substation power systems. ArcelorMittal factory & Jubail 26 D S/S Safaniyah 380/ 230KV SS Performing inspections & tests to determine whetherdelivered products and or installed. Provide technical direction to engineers and designers in theexecution of the electrical scope of work. Read project schedule and track progress on site. Implement safety and quality programs on site. Testing Numerical protection relays(Main , backup relays andAux ) . GIS and SWGR testing &Scheme and function check . Liaising with stakeholders & coordination between differentcontractors working in the same area or where there areoverlapping/interfacing activities. Overseeing the erection of the Extra High & High Voltage Electrical Substation. عرض أقل

• 

  DAR ENGINEERING

  Oct 2013 - Dec 2015

  Senior Electrical Engineer

  Led Commissioning Engineers teams on an overhaul Testingand commissioning of the Substation power systems. Direct the daily activities, planning, and coordination of thetesting & commissioning activities frequent meetings andperformance control. Checking and verifying drawings (Marked up &As Built ) as pertechnical specifications. Create statistical reports for management on a recurring. Testing Numerical protection relays (B.B ,DIFF. ,Distance andbackup relays.Testing 132 KV GIS ,33 KV SWGR and 13.8 KV SWGR andrelated equipment's. Power transformer testing (turns ratio, tan delta, windingresistance,…….). HV Test for GIS ,SWGR and HV cable. Scheme and function check for 132 KV GIS , 33 KV SWGR and13.8 KV SWGR. Testing capacitor bank. Testing and commissioning ABTS,TOP,ACCS and SAS systems. Implement safety and quality programs on site.Perform functional testing and final acceptance on electricalSubstation(380 KV,132 KV,33kv,13.8kv ,…. ) and relatedequipment including: control panels, relay s and Equipment(GIS,SWGR,TR,CB,CT VT ….etc. عرض أقل

• 

  National Grid SA

  Dec 2015 - Oct 2022

  Senior Electrical Engineer

  Witnesses all substations testing, pre-commissioning, commissioning and substation start-up activities to assure contractors’ compliance with the approved plans and procedures. Perform functional testing and final acceptance on electrical Substation(380 KV,132 KV,33kv,13.8kv ,…. ) and related equipment including: control panels, relay s and Equipment (GIS,SWGR,TR,CB,CT VT ….etc. Reviews Substation Red marked up and as-built drawings, Relay setting and coordinates with the concerned departments. Lead the subcontractor for the safe execution of Pre-Commissioning /Commissioning activities in line with the schedule. Reviews substation tests results generated by T&C contractors, and approves those complying with the specification requirements and FAT. Provide technical support and problem resolving on different electrical Equipment: Transformer, EHV& HV/LV Switchboard, Relay and protection systems. Focuses on meeting the overall project targets and assumes the communication with all stakeholders. In charge for the Completion of works according to planning and quality standard, and without accidents. Reviews quality programs ,risk assessments ,inspection and test plans, installation, testing, pre-commissioning and commissioning procedures, for electrical equipment and cablework, and provides recommendation ,record punch list and site instructions to the contractors.Monitoring of contractor’s progress of works to ensure timely execution of work in accordance with the project schedule and in coordination with the work of other tradesand disciplines.Reviews and approved contractor-submitted Red marked-up and as-built drawings.Review and approval of contractor’s submittals, including team Organization chart, project schedules, SAS Point List and materials submittals, Ensure compliance with thedesign intent.Testing and commissioning ABTS,TOP ,ACCS ,ATS and SAS systems. عرض أقل

• 

  AFRY

  Oct 2022 - now

  Lead Electrical Engineer - A. Electrical Commissioning Manager

  Responsible for managing the safe and efficient commissioning and start-up of all projects, and electrical equipment installed in accordance with the high standards expected by our client. Further responsible for management of all site-based electrical inspection, testing and commissioning activities, including regulatory inspections and authorization of electrical engineers.Making sure that designs, installs, tests operates, and maintains all equipment correctly and supervising staff. Excellent time management, leadership, and organizational skills to keep operations running on time.KEY ACCOUNTABILITIES: Manage the day-to-day activities of the team and sites. Oversee, manage and direct the T&C activities in a safe and efficient way from the beginning to the end. Provide leadership, supervision, technical support, and direction to the Electrical engineering staff and design work. Ensure quality and accuracy of EPC Contractors. Review and approval all multi-discipline Testing and commissioning documents to ensure they are compliant with the specifications and standards of the project.Write and prepare business letters and technical reports to align with EH for TPS (Technical Specification Proposed Changes), and VOP (Variation order proposals). Review and approve the submittal design, As-built drawing, DRN (drawing revision Notice), Material submittal using AMA (Application for Material Approval) and contractor invoices. Evaluating actual site construction and readiness for pre- commissioning/commissioning and preparing an in-depth report regarding the same. Coordinate and supervise with the project manager and the client to evaluate the consequences of issues identified during testing during weekly technical and coordination meetings.Witnesses/manage electrical testing, pre-commissioning, commissioning, and start-up activities. عرض أقل