Pradeep Sawant

Experience

• 

  Mukand Limited

  Aug 2007 - Aug 2014

  QC Supervisor

   QUALITY CONTROL OF STEEL LONG PRODUCTS Prepared QA/QC dossier as per client requirement. Carried out Dimensional inspection. Monitored of Preheating/ Post heating / post weld heat treatment and electrode backing activities. Inspected and tested safety relief devices. Preparation of test pack and witnessing of hydro test. DOCUMENTATION

• 

  Punja Petrokem Engineering Ltd

  Sept 2014 - Jan 2015

  Inspection Engineer

   Carried out inspection activities like Long Seem, Circumferential Seem Set up, shell alignment, dished-end, vessel’s nozzle, manhole, cleats, brackets and supports.  NDT inspection of Pressure Vessels, Reactors. Prepared documentation which contains the technical aspects regarding vessel dimensions, final nozzle dimensions, final visual inspection report, NDT reports, Hydro test reports, Material Heat Chart and packing list are submitted before the dispatch of equipment. Reports and Documentation, coordinate with TPI Show less

• 

  SGS

  Jan 2015 - Jan 2016

  Inspection Engineer (NDT / QC)

   Third party inspection from material inspection to final ispection of vessel, tank, reactors. NDT inspection like UT, VT, MPT, LPT etc. Reviewed test Certificates of bought out item like plates, pipes, gaskets, fasteners. Conducted stage wise inspection for material identification to final dispatch. Reviewed quality document like QAP, WPS, PQR, QA/QC procedures, NDE procedures and final documents. Witness the Welding for establishing PQR for welding processes like GTAW, SMAW. Witnessed welder qualification and training of welders as per requirement of ASME Sec. IX Final inspection of job like hydraulic test, pneumatic test, nitrogen purging. Witnessed destructive testing in external lab. Load Lifting Gears Inspection, O&G offshore drill pipes/collars and accessories inspection. Show less

• 

  Fabtech Consulting Engineers Pvt. Ltd.

  Jan 2016 - Apr 2017

  Quality Control Engineer

   Developed Inspection and Test Plan as per QC procedure, client specification and approved drawings. Reviewed and counter vetted the P& ID’s, Isometric Drawings, GA drawings, As-built drawings, QCP and other project related documents especially related to Vessel, Structural, Ship Building. Inspected Incoming material, sampling, check testing of material & Acceptance/ Rejection of material to applicable code & specification.  Prepared WPS, Witness PQR, WPQ, prepare weld seam check list required to cover welding works. Inspected received material, fit-up, visual inspection, welding inspection, dimensional inspection, request and witness NDT activities, review RT Films. Witnessed Hydrostatic Test, pneumatic test, PWHT, PMI, Vacuum test, Tensile test, Impact test, Hardness, Bend test. Inspected Surface preparation, painting, coating, pasivation, insulation & packing activities. Show less

• 

  BK Engineers (I) Pvt Ltd

  May 2017 - Feb 2018

  Quality Control Engineer

   Prepared ITP for Storage tank. Prepared procedures for NDT, Hydro test, pneumatic test, painting, Weld repair etc. and getting approval from client/TPI. Handled team of Fabrication and Welding personnel and assigning them the roles appropriately as per the project schedule Stages wise inspection like Vertical/Horizontal Joints set up, dimensional inspection, peaking / banding plumpness, annular plate/base plate fit-up, sump fabrication, shell alignment, fit-up of tank nozzle, manhole, rackets andsupports. Carried out NDT inspection like oil and chalk test, MPT, RT interpretation, back chip/final DP, hydro test, vacuum test, Pneumatic test for RF pads Visual Inspection of joint fit-ups. Prepared documentation which contains the technical aspects regarding tank dimensions, final nozzle dimensions, final visual inspection report, NDT reports, Hydro test reports, Material Heat Chart, vacuum test report, RT sketch, weld NDT summery report, fit-up reports, weld visual reports etc. Show less

• 

  Metscco Heavy Steel ind. co.

  Feb 2018 - Mar 2020

  QC Mechanical Inspector

  Aramco approved QC Mechanical Inspector, Saudi Arabia Projects:(1) Yanbu Distribution Hub, Package # 03 (17nos. Storage tanks) (ARAMCO PROJECT)(2) North Jeddah Bulk Plant, Jeddah (Maintenance of Storage tanks) (ARAMCO PROJECT) Inspected Fabrication, layout and erection / installation of annular plates, bottom plates, shell plates, cleanout door, deck plates, sumps, primary & intermediate wind girders, top angle, external ladders, spiral stairway, rolling ladder etc., as per approved IFC drawings, ITP/checklist, codes and client requirements. Fabrication, layout & erection / installation of pontoon & deck accessories for internal & external floating rooftanks. Witnessed vacuum box testing of fillet welds of bottom & deck plates, HDPE sheets. Witnessed Oil penetrante testing for root weld between shell & annular, between pontoon accessories includes outer rim, inner rim, bulk head & top skin plates. Witnessed DPT / MPT for weld between shell & annular from inside & outside, after back chipping of welds, permanent & temporary weld attachments. Show less

• 

  Tinita Engineering Pvt. Ltd.

  Jul 2020 - Dec 2021

  Senior QA/QC Engineer

  • Prepare Inspection Test Plan and all QA/QC documentations like QA/QC procedures, method statements.• Carried out inspection activities like Long Seem, Circumferential Seem Set up, shell alignment, dished-end, vessel’s nozzle, manhole, cleats, brackets and supports. • Performed regular inspections on dimensional accuracy and record all observation.• Accountable for preparing NDT plan, seam-wise check list and carried out visual inspection of joint fit-ups, in process and completed welding inspection on various Materials.• Prepared documentation which contains the technical aspects regarding vessel dimensions, final nozzle dimensions, final visual inspection report, NDT reports, Hydro test reports, Material Heat Chart and packing list are submitted before the dispatch of equipment.• Coordinated with Client Inspector, TPI and fabrication engineers.• Ensured preparation of WPS, PQR and WQR documents (applicable to project specifications) as per ASME Section IX and the getting the same approved from the client and TPI prior to commencement of job.• Reviewed the Test Certificates of all received materials especially plates, piping and welding consumables at site to ensure that all piping materials and welding consumables, gases, flux, filler wires meets the codes/specifications requirements and are in good condition prior & during use and accordingly onward submitting the documents to the client’s and TPI for approval. Show less

• 

  Tata Projects

  Oct 2021 - now

  Inspection Engineer

  Freelance working in TPL

• 

  Doosan Babcock

  Jan 2022 - Apr 2022

  QC inspector at Doosan Bobcock

  Shutdown project at ADNOC sour gas plant, Abu Dhabi

• 

  Ramsis Engineering Co. W.L.L

  Aug 2022 - now

  QC Inspector

  Shutdown project for BAPCO Plant