Experience

• 

  Oil and natural gas commission

  Feb 1988 - Apr 1992

  Junior engineer

  1) Repair of VHF / UHF base stations (BEL and Standard model)2) Repair of VHF / UHF Repeaters.3) Maintenance of PAGA System (Gaitronics)4) Maintenance of Non Directional Beacons (Southern Avionics and NAUTEL)5) Drawing update of PAGA and EPABX6) Coordination with VSNL for troubleshooting of direct lines7) Supervision on instrument technicians for field work.8) Update of instrumentation drawings.9) Maintenance of CCTV cameras and combiner unit10) Repair of DC power supplies.11) Spare parts planning for future use on platforms.12) Coordination with vendors and contractors to carry out telecommunication commissioning and spare parts supplies.13) Repair of meteorological systems. Show less

• 

  Kuwait shipbuilding & repair yard company

  May 1992 - Aug 1992

  Electronics technician

  Worked with WOOD GROUP for Kuwait Oil Company & KSRC and was responsible for following tasks-1) Installation and repair of VHF base stations and repeaters.2) Repair of six slot and single slot battery chargers.3) Checking sensitivity of duplexer.4) Repair and installations of power supplies up to 40 Amperes.5) Repair maintenance and configuration of ANI decoders.6) Repair maintenance of power supplies rating 13.8VDC, 5 Amp and 40 Amps For base stations and repeaters.7) Repair of handheld radios and as well as repair of battery chargers.8) Preparation of monthly material requirement and updating of telecommunication related documents.9) Installed navigation equipments at KSRC, i.e. of Radar Scanners, Radar Display Unit, Navigators, Echo Sounders, VHF Transceivers, Wind direction Meters, Wind Speed Meters and gyrocompass. Show less

• 

  Dallah establishment

  May 1993 - Sept 1999

  Wireless communication technician

  1) Repair and maintenance of Repeaters (Standard RPT-30, 180 Watts). Repair of repeater includes the calibration of duplexer according to Tx and Rx frequencies. Repair of driver cards, final amplifier cards, Rx module, and Tx modules. Adjusting sensitivity of Rx module, adjusting of tail timer and timer out timer of Tx module, adjustment of squelch control according to sensitivity.2) Repair of Base Stations (Standard GX-1500) and Hand held radios (Standard HX-340, HX-341, HX-440 and HX-441). Repair of microprocessor card, EPROM stage, pre-amplifier and final amplifier stage, Tuning of frequency deviation, power, sensitivity and VCO.3) Programming the hand held and mobile radio (i.e. TX frequency, Rx frequency, Tx tone, Rx tone, Tx timeout timer, Tx inhibit timer, busy lockout, emergency channel, Tx low power, battery save timer, CTCSS reverse burst and ANI), using computer and its standard interface.4) Repair maintenance and configuration of ANI Decoders (ST-822), according to its compatible data and programming the ANI Encoders (ST-804 & ST-804) using computer and its interface.5) Repair of 50Amp, 13.8Vdc power supplies (Astron). This power supply is used with repeaters. And repair of 10Amp, 13.8 VDC power supplies that are used with base stations.6) Knowledge of calibration of frequency, frequency deviation, ctcss parameters, ANI codes, sensitivity of radio sets, power and reflection power of radios and repeaters using service monitor IFR-1500.7) Supervising telephone technicians to keep trouble free PABX telephone system (Model: NEC-2400) of 230 extension lines, 10 PTT input lines.8) Programming of ANI Decoders.9) Setting all technical parameters of repeater like, modulation, sensitivity, timeout delay, tail timer and power.10) Updating of drawings, MDF and IDFs.11) Planning of required spare parts and components. Show less

• 

  Okaz electronics industries

  Jun 2000 - Jul 2006

  Electronics engineer

  1) Preparation of tenders documents for fibre optic cable laying, termination and splicing in BSNL at Solapur, Gulbarga and Bijapur.2) Completed several projects within city limits as well as highways in laying of Fiber optic cables, with splicing and terminations.3) Managed teams of excavators of making ducts for fiber optic cable laying as per BSNL guidelines.4) Knowledge of splicing and testing of fiber optic cables using ERICSON FSU 925 splicing machine, and testing the optical Fiber cable using OTDR EXFO FTB-100, and Optical power meter ST-800.5) Installation and maintenance of VHF/UHF Repeaters at various projects.6) Programming the repeaters Base stations & hand held radios according to assigned frequency and Power.7) Installation of Base Stations.8) Chip level repair of Repeaters, Base Stations, Hand held Radios, Power Supplies & ANI Decoders.9) Completed projects in data cables installation & termination, with networking of computers especially in Govt. sector.10) Site surveys for bidding the government projects.11) Preparation tender documents for final bidding.12) Appointing sub contractors to carry out works at site Show less

• 

  Bunduq oil company

  Aug 2006 - Jul 2008

  Telecommunication specialist

  1)Repair and maintenance of VHF handheld Radios Model STANDARD HX-341, HX-370, HX-380 & HX-381, VHF AM Radios YAESU Aviator pro, FURUNO FM-8500 Radiotelephone, JOTRON VHF GMDSS Radios, and Base Stations ICOM IC-M80.2)Programming the radios through standard programming software and its interface.3)Repair and maintenance of single slot battery chargers for HX-370 (CD-26), for HX-341 (STANDARD CSA 101), for HX-381 (MC I a), for GMDSS radio (TCH-12), and six slot battery chargers for HX-341 and HX-381.4)Repair and maintenance of Life Boat intercom system VINGTOR Brand.5)Repair and maintenance of Radio Beacon Transmitter NAUTEL ND-500 II & Beacon Monitor Receiver NAUTEL NRB46)Handling all EPBX related tasks. EPBX System SONY ERICSON consono MD 110 with 20 input lines and 200 extensions.7)Preparing the monthly outgoing call reports.8)Keeping all payphones and extension phones functional.9)Repair and maintenance of Public Addressing System MILBANK Brand, two racks with 8 amplifiers in each rack with dc surveillance cards10)Repair and maintenance of Audio Entertainment system MILBANK brand with 4 amplifiers.11)Distribution of CATV channels using different types of satellite receivers like ECHOSTAR, NOKIA, NEOSAT, EUROVISION etc. with Modulator POLYRTRON SPM1000 plus with CATV Amplifier HV40126N-PG11. Keeping the cable network trouble free.12)Preparation of material requisition and planning the radio licenses renewals.13) Coordination with ETISALAT in troubleshooting of microwave link NEC brand Model NAR651and ISDN network.14) Updating of drawings, records and other documents related to the telecommunication network.15)Coordination with vendors on technical issues.16)Managing adequate test equipments and spares on site.17)Installation and termination of data cables, as well as termination and troubleshooting UTP Cat5e and Cat6 LAN cables.18)Carry out termination of Ethernet to Fiber converters and patch panels Show less

• 

  Cse transtel

  Sept 2008 - Jun 2012

  Sr. field engineer

  List Of Completed Projects:•GAS PROCESSING FACILITES PROJECTClient: TECHNIP End User: ADMACommissioning of CCTV and LAN system at GPF platform•MW LINK at AUH AND ACPTClient: ZADCOSupervision on installation and commisioning of SDH system link between ZADCO HQ to UAD platform, South Satellite platform and ACPT.•ASAB FFD ProjectClient: PETROFAC End User: ADCOSupervision on installation, and commissioning of SMATV, EPABX, Wi-Fi , Radio System and structured cabling.•OFFSHORE ASSOCIATED GASES PROJECTClient: Technip End User: Abu Dhabi Gas Liquefaction Company (ADGAS)Supervision on installation and commissioning of UHF repeater (MTR 2000) and base stations GP338.•QATAR GAS 3&4 Offshore project at WH-7,8 & 9Client: Jay Ray Mc Dermott End User: Qatar GasNDB Southern Avionics, UHF base station TAIT TBA7100, VHF marine base station SAILOR, VHF AM base station JOTRON, Crane Radios MOTOROLA, Hand held radios MOTOROLA and handheld AM radios JOTRON.•QATAR ALUMINIUM (QATALUM) at DohaClient: Doosan Heavy Industries and construction End User: Qatar AluminumFibre Optics back bone for IP telephones, Data Network, CCTV cameras, IP telephone network, PAGA Gaitronics.•DOLPHIN ENERGY at Abu DhabiUHF base station TAIT TBA 8100, VHF base station SAILOR and CCTV network PELCO.•SUMANDAK project at MalaysiaNDB Southern Avionics•Qatar Gas-II project at WH-4, 5, 6, North Field Bravo and Ras Laffan.Client: NPCC End User: Qatar GasCCTV network PELCO, Optimux and Multiplexers VALIANT, Non Directional Beacons Southern Avionics, NDB receivers Southern Avionics, UHF base stations TAIT, VHF base stations SAILOR, Aeronautical Radios JOTRON, SCADA Telemetry Radios MDS, Routers and Switches CISCO, Meteorological system VAISALA brand, Open Transport Network SIEMENS brand, Public Addressing and General Alarm GAITRONICS, Voice Recorders TOTAL recall, Crane and handheld radios MOTOROLA, Life Boat Radios JOTRON. Show less

• 

  Jai hind engineers

  Oct 2012 - Dec 2016

  Senior commissioning engineer

  Supervision on installation and Commissioning of telecommunication equipment on various projects of BSNL and Indian Railways. The systems are, multiplexers, Optimux, VHF/UHF repeaters, Optical Fibre cable laying, splicing, end to end OTDR Testing, GPS Clocks, Data loggers and Voice Recorders, Weather monitoring systems, EPABX (IP and Digital) & unmanned gate control systems.Preparation of tenders and carry out site surveys. Managing third party contractors in installation and cable laying in rural and urban part of India. Show less

• 

  Silvertech middle east

  Oct 2017 - Nov 2018

  Project / commissioning engineer (telecom)

  Presently involve in commissioning of 32 nodes of SDH system, STM-16, Brand: DNPW for our client Qatar Petroleum at Qatar.The responsibility includes preparation of method of statements, Telecom system architect and block diagram updates, Preparation of AS BUILT diagrams, material submittals and approvals, comments resolution on drawings, supervision on installation of all 32 SDH nodes, carry out Factory Acceptance Test, Preparation of Fibre optic Installation and testing ITP, preparation of pre-commissioning documents and to Commission the project, complete Site Acceptance Test and system handover to Qatar Petroleum Show less