Ghulam S.

Experience

• 

  Harbin Electrical International Company China EPC (HEI) http://china-hei.com/en.php

  Dec 2009 - Jul 2012

  Mechanical Engineer

  Harbin Electrical International Company China EPC (HEI) is engaged as an EPC Contractor at 560 MW Combined Cycle Power Plant Project of KESC near Port Qasim. The Project is based on 3 x 9E PG917E Gas Turbines from GE in Combined Cycle Mode with 180MW of Steam Turbine from Harbin Power Engineering China.Major Holding AreasWorked on 3x120MW GE PG9171E Gas Turbines, 3 HRSG’s, 1x190MW HTC Steam Turbine & BOP of BQPS-II 560MW CCGT Project in Bin Qasim, Karachi.• Installation and Commissioning activities of 560 MW CCPP Project.• Performing surveillance of all static, rotating and packaged equipment installation work in progress on a continuing basis includes storage tanks, vessels, columns, heat exchangers, compressors, pumps, packaged equipment.• Preliminary design and engineering of pipelines according to codes and standards.• Erection/Installation and Site Inspections.• Progress monitoring, Planning/Scheduling & Documents controlling.Gas Turbine:Installation & commissioning of three Gas turbine Frame 9E by General Electric. Including Steel structure, Fuel oil, Fuel Gas, Lube oil & System piping. Installation Quality inspection vet according to GE Specs. Flushing of Lube oil & fuel oil system. Installation & commissioning of Tyco fire fighting System. Installation & Commissioning of American Air Filter Inlet system. Final On-Base & Off-Base Piping & System Audit of all units before commissioning. Hydro tests according to the designed procedure of GE Standard for all fuel oil, lube oil water wash, Air Atomizing, Fuel gas PipesHRSG Area:Three Horizontal Flow Heat Recovery Steam Generator systems of 177 ton/Hr Flow for Running of 200MW Steam Turbine.Welding of steel Structure & sealing Weld of casing. Pipe welding of P91 & G20 & P22 material.Vetting the methodologies of Erection & Welding of PWHT for Piping. Inspection of HP, LP Tanks. Hydro Testing of Piping & System. Welding of Main Steam Pipe Line. Commissioning of main HRSG System. Show less

• 

  Saudi Services For Electro Mechanic Works co. (Closed Joint Stock Company)

  Aug 2012 - Oct 2014

  Project Engineer (Mechanical)

  CLIENT :SWCC COSULTANT: ILF- khatib & AamiSaudi Services for Electro mechanic works Co (Closed Joint Stock Company) is engaged as an EPC Contractor at Rasalkhair Riyadh Water Transmission System WTS. The Scope of the Rasalkhair Riyadh Water Transmission System WTS is to transport potable water produced at the new Desalination Plant located in Rasalkhair, at the east coast of Saudi Arabia, to the City of Riyadh. The Project is based on Two 380 kV Substations O/H transmission lines to feed the Three Pumping Stations PS-1, PS-2 ,PS-3 each with a capacity of 900,000m3/dayMajor Holding Areas• Installation and commissioning of main pumps supplied by SULZER PUMPS CO LTD• Installation and commissioning of motors supplied by CONVERTEAM GE• Responsible for Pre alignment and final alignments in the supervision of sulzer.• Responsible for the Erection of suction discharge piping with proper pressure class.• Responsible for the erection of check valves, BFV. According to PIDS AND Isometric Drawings.• Pressure vessels & PRS System• To ensure the erection of pressure vessels 143 m3 as per ASME Sec. VIII Div 1. And its piping with proper fittings according to pressure class .Responsible for Inspection of fabrication as per ITP. Dimensional inspections for marking & cutting. Fit-up & welding inspection. Witness the PWHT. Hydro test for vessels for new and after re-rating or alteration.• To satisfied the consultant / client for proper use of fittings, pipes according to ASME Code. Air compressors:• Installation and commissioning of 3 Air compressors by Atlas Copco.• Installation of stainless steel piping including Cooling towers, air receivers according to P&IDs. According to isometrics.• Responsible for 3 air compressors field inspections like raising RFIs for initial inspection and ECC for final inspections, hydro test etc.• Responsible for Pre commissioning and final commissioning Raising RFI, ECC, MCC, MRIR, for field inspections. Show less

• 

  Dar Al Riyadh

  Dec 2014 - Dec 2017

  Mechanical Engineer.

  Mechanical Engineer E& A & infrastructureCompletely responsible for site inpections installed by contactor proper fit up and workability of internals. Activities include internals inspection and trial fit ups, of Pumping station, piping, Pressure vesselResponsible for site inspection for HVAC, plumbing and fire fighting works.Responsible for Checking Supplier Document For aprovals Index schedule from start to completion of project, installation and commisioningChecking the Material Inspection requests as per approved submittal.Checking the installation of various mechanical services.Checking the testing and commissioning of various HVAC, plumbing and fire fighting systems.Preparation of Shop Drawings to take the approval from the other Government Authorities.Planning of all the Project activities as per the Civil Contractor’s construction program.Supervision of domestic water supply as well as drainage systems.Supervision of all the jobs related to plumbing, Fire Fighting and HVAC and be sure that installation work is being done properly as per the approved shop drawing.Coordination and monitoring of the entire project with planning, material and other concerned departments.To estimate, monitor and maintain the project cost in all times and to report the changes if any.Installation of Air Conditioning Services including ducting, piping, Chilled water connection of District Cooling system to Heat Exchangers.Installation of BTU Meters for the District Cooling System for Billing Purposes.To attend the technical as well as progress meeting with the Consultant, Main Contractor and Client representatives.Supervise and witness the testing of water supply and drainage system before installation of sanitary fixtures to ensure their tightness and free from obstruction. submitting the weekly progress report and Look Ahead Program to the concerned Project Manager.To ensure that works to be executed as per specification shop drawings by consultant; Show less

• 

  A.Hak

  Jan 2018 - Aug 2018

  Senior Procurement Engineer( Mechanical)

  CLIENT :SWCCCOSULTANT: khatib & Aami•Preparing RFQ consists of technical specifications; BOQ’s and drawings based on tender and design documents.• Efficaciously assessing quotations received from vendors / suppliers along with compliance statement.• Ensured proper coordination with Suppliers, Engineering & Operations for:o Internal evaluation before proceeding with consultant/client review o Arranging the meetings between (Procurement, Technical Peoples & Vendors) for technical discussion/ clarifications o Ensuring that there won’t be any increment in price after consultant/Client approval o Evaluating all bids and participating in the technical analysis of standard and less complex bids • Establishing terms & conditions based on project requirement such as payment, mode of delivery, delivery date, performance bond, etc.•Design reviewing for the system, Coordinating with Suppliers, Operations and Consultants for submission & approval of technical submittal & proceed with Purchase Order (Local or Overseas)• Carrying out discussions for defective or unacceptable goods or services with users, vendors to determine source of trouble, thus taking corrective action. Show less

• 

  Al Rashid Trading & Contracting Company (Closed Joint Stock Company)

  Jun 2018 - now

  Client :SWCCProjects on Hands: Water trnamission lines Riyadh new city Feeder- shoaiba mina B- SHUQAIQ-III- shoaiba-4.Consultants: khatib & alami- khatib & alami-Pöyry- ILF • Preparing RFQ consists of technical specifications; BOQ’s and drawings based on tender and design documents.• Efficaciously assessing quotations received from vendors / suppliers along with compliance statement.• Ensured proper coordination with Suppliers, Engineering & Operations for:o Internal evaluation before proceeding with consultant/client review o Arranging the meetings between (Procurement, Technical Peoples & Vendors) for technical discussion/ clarifications o Ensuring that there won’t be any increment in price after consultant/Client approval o Evaluating all bids and participating in the technical analysis of standard and less complex bids • Establishing terms & conditions based on project requirement such as payment, mode of delivery, delivery date, performance bond, etc.•Design reviewing for the system, Coordinating with Suppliers, Operations and Consultants for submission & approval of technical submittal & proceed with Purchase Order (Local or Overseas)• Carrying out discussions for defective or unacceptable goods or services with users, vendors to determine source of trouble, thus taking corrective action. Show less

  • Lead Senior Mechanical Engineer (Procurment and Techncial ) Saudi arabiya

    Jan 2023 - now

  • Senior Mechanical Engineer

    Jul 2019 - now

  • Senior E/M -Procurement Division Engineer Water & Infrastructure Projects Department

    Jun 2018 - now