Orkhan Samadov

Experience

• 

  SOCAR

  Jun 2009 - Mar 2011

  Instument and Control Engineer

  • Installation “Leuza-2” drilling monitoring system• Installation “Shenkai” drilling monitoring system• Develop Gas flow monitoring system

• 

  AAC / Gobustone | Modern Building Materials Plant

  Mar 2011 - Sept 2011

  Automation Engineer / programmer specialist (PLC - Siemens)

  Commissioning the plant

• 

  BP

  Sept 2011 - Sept 2014

  - Identify requirements for plant modifications and improvements and manage the scoping and implementation of modifications using the MOC, PSCR process and approved standards and procedures.- Monitor plant overall performance and identify any area’s of improvement from an Instrument and Control perspective.- Conduct alarms review, Trip & control study and Single point of failure exercise for detecting potential risks and manage remedial measures.- Provide I&C discipline support to the Operations assisting in technical problem solving and resolution of operational issues through EQs / MOCs. - Own Valve time tracker for monthly reporting and interaction with planning. - Support for runtime tracker and condition monitoring instrumentation.- Deliver optimum performance from instrument and control systems by focusing on defect elimination and by refining maintenance strategies and practices.- Interface with colleagues in the Operations & Engineering to ensure experiences and lessons learned are incorporated into the maintenance strategies of instrument and control systems and equipment . Especially for the Top Ten Bad Actors i.e. areas of poor performance as identified under PEI. Show less - Maximize uptime and reduce business losses associated with instrument and control systems in plant and equipments. - Provides specialist discipline expertise in upkeep of condition monitoring tools like System One and SVTT (Safety Valve Time Travel).- Measure and analyse ICSS (Integrated Control and Safety system) / F&G (Fire and Gas) alarms, upset causes and own root cause investigation.- Decide methodology and approach to increase equipment uptime and reliability.- Recommend new technologies to maximize uptime and reduce intrusive maintenance. - Recommend activities / loss mitigation projects for inclusion in terminal activity hopper/ budget.- Perform ICSS and F&G alarm analysis for reducing alarms nuisance.- Identify requirements for plant modifications and improvements and manage the scoping and implementation of modifications using the MOC (Management of Change) process and approved standards and procedures.- Monitor plant overall performance and identify any area’s of improvement from an Instrument and Control perspective.- Conduct alarms review, Trip & control study and Single point of failure exercise for detecting potential risks and manage remedial measures.- Own Valve time tracker for monthly reporting and interaction with planning. - Support for runtime tracker and condition monitoring instrumentation.- Input into the technical review and selection of operating and insurance spares for instrument and control systems.- Deliver optimum performance from instrument and control systems by focusing on defect elimination and by refining maintenance strategies and practices.- Interface with colleagues in the Operations & Engineers to ensure experiences and lessons learned are incorporated into the maintenance strategies of instrument and control systems and equipment . Especially for the Top Ten Bad Actors i.e. areas of poor performance as identified under PEI. Show less

  • Instrumentation and Control Engineer

    Dec 2013 - Sept 2014

  • Reliability Engineer - Instrument and Protective Systems

    Sept 2011 - Dec 2013
• 

  ABB

  Oct 2014 - Jul 2018

  Control System Engineer

  - ABB 800xA and AC800M (HI) software and hardware configuration, programming and system maintenance (Control Builder and Function Designer)- F&G and ESD/PSD control logic- Serial Links and OPC communications- 24/7 maintenance of non-HI and HI controllers and I/Os to deliver continuous gas production- Implementation of work packs, ad-hoc changes and predefined projects (annual TAR and outages)- Preparation of ready-to-install work packs for Healthcare Engineers working offshore on BP Caspian Platforms- FAT and SAT assistance, cooperation with final customer (BP)- Cooperation with Operation and I&C Team- Training for CRTs (Operation) and I&C department- Coordination of ABB sub-contractors on site- Order of material- Customer care and representation of the company- Customer meetings- Statistical Alarm Reports for Customer- Asset Reports (system status) for ABB onshore- Maintenance of third party systems: Autronica, Allen Bradley, ClampOn, CorrOcean and OPC based ProcessGuard (Matrikon) Show less

• 

  Wood

  Jul 2018 - Jul 2019

  Senior Instrumentation Control Engineer

  • Test Separator PIT Modification • Well conversion to Multi Zone Water Injector • New Oil Production Flowline • Sewage Treatment Plant Upgrade • Annuli pressure transmitter • Gas Production Flow Line • Emergency Transformer Replacement • Gas Lift Line modification • Production Flowline with Gas Lift • X-Tree Actuator Modification from Pneumatic to Hydraulic • HP/LP Flowline conversion and MSAS installation removal • Water Injection Flowline with Multizone • PIT Installation for Blue Risk Wells • Existing Flowlines Modifications • Gas Lift Manifold Extension • PSD Solenoid Test Modifications • Flare Ignition & Monitoring System Upgrade • Future Flowline Capacity Study • LP Separator PIT modification • Tensioning System • Installation of Permanent Flocculant Skid Show less

• 

  Airswift

  Jul 2019 - Apr 2021

  I&C Commissioning Engineer

  • Member of a team of ICSS Commissioning Engineers in Execute Phase commissioning activities including Fire and Gas, PCS, PSD, and Safety Instrument Systems initially in the pre execute commissioning preparation phase at Engineering Contractors offices in UK, then at the FAT and then during the onshore construction/commissioning phase and Start Up• Engineering data verification into Completions database• Ensure correct technical integrity is achieved and maintained in accordance with the Safety Instrument System Installation, Commissioning & Validation procedure and the SIS safety life cycle plan• Provide Technical input and approval for Commissioning Test Procedures• Provide Technical input to Site queries and review of all ICSS software changes.• To manage assigned aspects of ICSS static and commissioning as required. Show less

• 

  SOCAR Petrofac Caspian • SPC

  May 2021 - Sept 2022

  Instrumentation and Control Engineer

  • Member of a team of ICSS Commissioning Engineers in Execute Phase commissioning activities including Fire and Gas, PCS, PSD, and Safety Instrument Systems initially in the pre execute commissioning preparation phase at Engineering Contractors offices in UK, then at the FAT and then during the onshore construction/commissioning phase and Start Up• Engineering data verification into Completions database• Ensure correct technical integrity is achieved and maintained in accordance with the Safety Instrument System Installation, Commissioning & Validation procedure and the SIS safety life cycle plan• Provide Technical input and approval for Commissioning Test Procedures• Provide Technical input to Site queries and review of all ICSS software changes.• To manage assigned aspects of ICSS static and commissioning as required. Show less

• 

  Wood

  Sept 2022 - May 2023

  Principal Engineer

  AIM 4 Gas Analyzer Package installation

• 

  Glensol

  Jun 2023 - now

  Field Services Engineer

  Glensol, SCPX:• Software and hardware configuration, programming and system maintenance of GTC (RB211) and GTG (Solar Taurus)• F&G and ESD/PSD control logic• Serial Links and OPC communications• 24/7 maintenance of non-HI and HI controllers and I/O’s to deliver continuous gas production• Investigation of Alarm/Trips and SD’s• Implementation of work packs, ad-hoc changes and predefined projects (annual TAR and outages)• Preparation of ready-to-install work packs for Field Service Engineers• FAT and SAT assistance, cooperation with final customer (SOCAR Midstream)• Cooperation with Operation and I&C Team• Order of material• Customer care and representation of the company• Customer meetings• Statistical Alarm Reports for Customer• Asset Reports (system status) for Glensol onshore Show less