Experience

• 

  Agni aerosports adventure academy (p) ltd

  May 2015 - Sept 2015

  Aircraft technician trainee

  • Assisted in Manufacturing ultra-light Aircraft (Rajhamsa X-Air H).• Performed and managed different maintenance tasks for Airframes and Power-plant systems.• Inspected the Aircraft Parts and rectified snags.• Reconfigured, installed, positioned, and remounted different parts and assemblies of the Aircraft.• Assisted in Rigging of flight control and engine controls.• Duties involved the fabrication of structural parts, sub-assemblies, and final assembly of Micro-Light Aircraft. Show less

• 

  Air india engineering service limited

  Oct 2015 - Mar 2016

  Quality assurance and technical services trainee

  • Reduced Cost by decreasing man-hours and avoiding unnecessary transfer of items.• Effectively reviewed all regulatory authority regulations and their effect on engineering procedures to assure that regulatory requirements and standards were maintained using CAME, MOE, service bulletin (SB), AMM, IPC, Airworthiness Directive (AD), EMM, MEL, drawings, and technical specifications.• Experienced in both CAMO (CAR-M) and CAR-I45 environments, which includes Quality Assurance, Material Planning, Safety, Maintenance Planning, Production Planning, Man hour planning, technical documentation, and Reliability. • Forecasted and prepared the project plan half-yearly for material requirements (consumables and Expendables) required to carry out upcoming phase checks, ‘C’ checks, and compliance with Airworthiness Directive, Service Bulletin, Service Letter, and other regulatory requirements based on hangar visit plan (HVP) for MRO.• Implemented new ideas and made the system more efficient.• Experienced in both CAMO (CAR-M) and CAR-I45 environments, this includes Warehouse and store inventory, Material Planning, Production Planning Technical documents, Maintenance Manuals, and Quality Assurance.• Coordinated with the Maintenance planning department to expedite external party repair orders. Show less

• 

  Belmar aviation - india

  Apr 2016 - Jan 2017

  Operations supervisor

  • Assisted in Issuing, receiving, binning, and transfer of items and initiating procurement in case of shortage.• Executed with excellence in stock and demand replenishment providing feedback to the supply chain on risks regarding replenishment levels and demands.• Responsibilities included the integration of sub and major assemblies and erection of major components like fuselage, wing landing gear, horizontal, stabilizer, vertical stabilizer, and control surfaces.• Diligently carried out all inspections, scheduled and non – scheduled and carried out snag rectification.• Modified Aircraft structures, systems, and components, following drawings and technical.• Performed and managed different Aircraft maintenance tasks under FAA-licensed AME.• Monitored and controlled carry-forward snags and arrange spares to clear them before the due dates. Show less

• 

  Dcfc logistics and distribution llc

  Apr 2017 - Apr 2018

  Operations assistant

  • Organized Land Transportation for inbound and outbound. LCL/FCL shipments coordinate multipoint loading and monitor the movements.• Handled the entire Job requirements for Import and Export Shipments.• Extensive knowledge about MARSAL II and all types of customs clearances (Dubai Trade).• Responsible for handling the entire Job requirements for Import and Export Shipments• Liaison extensively with Dubai Customs, Port Authorities, carriers, and shipping agents as per the requirements.• Liaison and coordinated with Messengers, Transporters, Shipper & Consignee for effective deliveries and collection.• Demonstrated exemplary expertise in communicating with Consignees, sending pre-alerts/pre-advice/arrival notice, and ensuring timely issuance of delivery orders, clearance, and delivery of Shipments.• Highly instrumental in facilitating shipment status updates to customers through Monitoring Movements.• Drive the efforts for conducting a qualitative analysis of client visibility and tracking competition daily.• Developed a strategy to achieve organizational goals and revenues.• Easily developed rapport with clients, transporters and Port Authorities quickly assess needs and respond effectively to pressure and deadlines.• Maintained registers and reports for Import and Export Operations. Show less

• 

  Electro optic systems

  Jan 2019 - now

  • Developed and implemented quality standards, procedures, and specifications to ensure that products and services meet or exceed customer expectations.• Designed and implemented an efficient material and production flow, both in practice and on a theoretical level, to facilitate the smooth movement of materials and products through the process.• Continuously enhanced organizational productivity, efficiency, and overall performance by refining and optimizing internal work processes.• Collaborated with production teams to identify and resolve quality issues during the manufacturing process, such as defects or non-conformities in materials, processes, or products.• Performed and participated in audits, assessments and recommended corrective measures, when necessary, of all engineering functions, quality control processes and procedures; Maintenance, Overhaul, and other support sections to ensure that the functions were in conformity with regulatory authority regulations.• Analyzed data and trends to identify opportunities for continuous improvement and cost reduction.• Developed and implemented corrective and preventative action plans to address quality issues and prevent recurrence.• Participated in design and development projects to ensure that quality standards are incorporated into new products and processes.• Devised and reviewed specifications for products and processes.• Developed and refined production and warehouse procedures for cost-effectiveness.• Functioned as a link between the Engineering team, operations, and production.• Contributed valuable insights to procurement, design, and operational planning processes.• Acted as the primary liaison and point of contact with the parent company, fostering effective communication and collaboration to ensure seamless coordination of projects, exchange of critical information, and alignment with corporate goals. Show less • Outstanding Performer for the Year 2022.• Second Inline for Depot (After Sales, Repair, and Maintenance) and Asset Management Section. • Maintained and improved the company's quality management system through lean techniques.• Provided technical support to production teams and other departments as needed to address quality-related issues.• Investigated and identified root causes of non-conformities in products, processes, and systems.• Developed and implemented corrective and preventive actions (CAPAs) to address non-conformities and prevent their recurrence.• Collaborated with production teams to identify and resolve quality issues during the manufacturing process, such as defects or non-conformities in materials, processes, or product.• Conducted training sessions to educate production teams on quality control procedures and standards. Also given Operators and Maintenance training for customers (Military) regarding remote weapon systems (RWS) and weapons (Northrop Grumman M230LF and MAG 58).• Utilized lean techniques and methodologies to identify process deviations and implement countermeasures.• Designed and implemented efficient material and production flow to improve productivity.• Collaborated with suppliers to ensure that incoming materials and components meet quality requirements.• Developed and maintained documentation, including quality control plans, work instructions, test procedures, acceptance procedures, integration procedures, and standard operating procedures. Show less • Promoted to Team Leader within 6 months of joining.• Solely managed the operation team to produce batches and successfully delivered.• Solely established depot (repair and maintenance) department as per CEO’s request.• Lead, Supervised, and assisted in the depot for all major repair, modification, and maintenance of different components (including ITAR) such as the Remote Weapon Station (RWS), sensor unit (including a thermal camera, day camera, and laser range finder), Display units, Electronics Modular Unit, Interface control unit, weapons such as Northrop Grumman M230LF and MAG 58 and up-gradation of firmware and programs.• Given training for customers (Military Personnel) and team members regarding remote weapon systems (RWS) and weapons (Northrop Grumman M230LF and MAG 58).• Rectified, modified, upgraded, and implemented innovative solutions to meet customer and project requirements.• Successfully performed audits and recommended corrective measures when necessary for all engineering functions.• Prepared Inspection Procedures and Test procedures for various LRUs, Equipment, Weapon, etc.• Planned the production, material, and maintenance requirements of each item.• Trained customers on RWS and Weapons.• Performed Inspections on LRUs and weapons. Show less • Promoted to Senior Technician within 03 months of joining.• Solely set up different capital equipment such as Vibration Table, shock table, Environmental stress chamber, Doppler Radar, Weather Station, etc., and commissioned it.• Created Operating procedures, test procedures, System Factory acceptance test (SFAT) procedures, Integration procedures, etc. for systems and equipment.• Trained Junior Technicians regarding Systems and Integration.• Performed Field service for weapons and RWS.• Set up a shooting range with equipment such as radar, weather station, etc. for live firing. Show less • Joined at the establishment stage of the company and was an integral part of setting up each department by contributing to Asset Management (Asset IDs, Asset list, Auditing, etc.), Forms (Job cards, Inventory forms, Various Asset related forms, Operations related forms, etc.), Procedures (Created Integration procedures, Test procedures, Operating Procedures, etc.), set up Shooting Range, Inspections, Training( Trained Users and colleagues on integration systems and weapons), Engineering Drawings (Designed target, jigs, fixtures, etc.), Policies (Asset Management, Quality, Stores, etc.), Procurement (Research and source suppliers, getting a quotation, comparing quotes from different suppliers) and Purchase (Raised all purchase orders), etc. • Assembled and integrated Remote weapon systems on armored vehicles.• Prepared Manuals, Procedures, Manufacturing Process Instructions, Checklists, etc. Show less

  • Quality Officer

    Mar 2023 - now

  • Senior Quality Specialist

    Mar 2022 - Mar 2023

  • Team Lead- Operations & Depot (After Sales, Repair & Maintenance)

    Jun 2019 - Mar 2022

  • Senior Technician

    Apr 2019 - Jun 2019

  • Junior Technician

    Jan 2019 - Mar 2019