Iurii Kiselev

Experience

• 

  The regional SDYuSOR of the education department

  Feb 2002 - Apr 2003

  Repairman of the sporting weapon

  Technical training and support for fencing competitions from regional to national scale. Assembly and adjustment, repair of swords, rapiers, sabers. Installation and repair of auxiliary equipment.

• 

  LLC “Cheptsa-energoremont”

  Apr 2003 - Jun 2003

  Electrician of the 3 rank

  Installation of electrical wiring and electrical equipment in buildings and structures; Preparation, installation of cable routes in and on the ground, overhead power lines up to 35 kV. Search and elimination of damage on power cable lines for various purposes.

• 

  Vyatka State University

  Jul 2003 - Aug 2003

  Worker - assistant

  Installation of electrical wiring and electrical equipment in the building of the auditorium. Installation and restoration of electrical lines. Search and elimination of damage to electrical equipment.

• 

  State educational institution of additional education of children. (OUDOD OSDYuSOR)

  Apr 2004 - Feb 2006

  Repairman of the sporting weapon

  Technical training and support for fencing competitions from regional to national purposes. Assembly and adjustment, repair of swords, rapiers, sabers. Installation and repair of auxiliary equipment. Participated in the introduction of a new system for fixing punctures for fencers, which meets all the requirements of international fencing rules.

• 

  Regional state institution Kirov socio-culttural centre “Family”

  Feb 2006 - May 2008

  Sound engineer of 6 category

  Installation and adjustment of sound and lighting equipment; Technical support and sound engineering for concerts of various genres; recording and mastering of phonograms; restoration and remastering of old records; control of lighting devices.

• 

  OJSC Kirov gasosilicate”

  Jul 2008 - Jul 2008

  The electricial of 5 cat egopry on repairment and electrical equipment service

  Maintenance and repair of various electrical equipment 1 and Poly phase AC and DC voltage

• 

  Gazprom

  Oct 2008 - May 2017

  Supervise installation, modernization, repair of equipment and knowledge sharing in electrical and automation fields. The expenses for maintenance declined by 38% to business by introducing an innovative telemetry system in manufacturing.• A telemetry system was introduced for gas chemical protection installations and gas distribution stations in the region. It reduced the cost of maintaining and collecting information by 68%.• Organized the collection of data from gas distribution points by means of telemetry. • Equipped stations for electrochemical protection of gas pipelines with telemetry and monitoring systems. • Configuring data collection servers. • Organization of work of two teams for the installation, repair and maintenance of electrical equipment, automation and communication systems• Handled customer complaints with empathy and composure. Show less

  • Engineer for automated control systems of production | Stock, Installation and Team management

    Dec 2011 - May 2017

  • Electrician of 6 category on repairment and electrical equipment service to the power supply service

    Oct 2008 - Dec 2011
• 

  NPGM Russian Federation

  Jun 2017 - Feb 2019

  Сommissioning and test engineer | Installation, Process improvement and Communication

  Assembly (connecting sensors, instrumentation, drivers and setting of control pneumatic and hydraulic systems), commissioning, and maintenance of automated machines for mixing chemical components and charging explosives for the mining industry. Product support throughout the life cycle, from interaction with the high-performance equipment design team to manufacturing, testing and delivery to the consumer.• Installation of equipment, adjustment, commissioning and delivery to the customer of mixing and loading machines for the mining industry.• Based on the built relationships with the project department, customers, as well as operational planning, staff training and documentation development, the project completion rate on time and at no additional cost was about 86%.Daily affairs:• Worked on laying and connecting power supply for various purposes (AC, DC), signal lines and communication lines for various protocols. • Set up automation systems, flashing modules and adapting software for equipment. • Installed and configurated of pressure sensors, temperature sensors, encoders, inductive and level. • Commissioned and maintenance of SZM at the customer's site, equipment commissioning 100%, on time 96%• Demonstrated an ability to assessed andadapt to changing situations and applied knowledge for quick decision making.• Created, drafted, and submitted incident reports.• Provided interaction with the customer and ensured a high level of equipment delivery to the customer. Show less

• 

  NLMK Group

  Feb 2019 - Nov 2021

  Part of the team that ensures that the tools are commissioned to run one of the most advanced and efficient production lines. Expert advice to the automation design and project teams to find optimal ways to require a combination of proven technology and the development of new innovative solutions and to ensure safety and quality measures at the sites and in the work environment. Having strong understanding of engineering fundamentals and ability to apply them toward manufacturing process development.• Participation in R&D activities on commissioning of innovative technologies and their suitability for production environments.•Active participation in the technical support team of the large construction project.• The system achieved fault tolerance by organizing automatic backup storage and data recovery.• Active participation in meetings and help in developing new practices.• Training, instructing and supervising new employees.• Careful handling of large amounts of money at the cash register.• Ideas to improve productivity and efficiency.• Helping management in identifying problems in the work process and finding solutions.• Leading and delegating tasks to a team of 2 people.• In meetings between client and contractor, sought mutual understanding and identified ways to achieve a common goal.• Analyzed current technology usage and developed plans to optimally utilize existing infrastructure and introduce new technology solutions.• Planned, developed and followed company-wide standards in technology usage and project plans.• Researched and evaluated new software and hardware technologies for suitability and performed cost-benefit analyses.• Ensured regular hardware maintenance and software backup. Show less General functions were project management, repair coordination, leading internal and external teams, technical improvement, and optimization of production processes. Managed repair, development, maintenance, upgrading, and implementation works of the automation system in the factory by working and interacting with internal and external stakeholders and suppliers. Cost estimations for projects and change requests, provide input for quoting and planning works. Reviewed and adjusted Engineering Design Documentation (requirement specifications, requirement specifications, functional design, logic diagrams), software, control system architecture and result.• Repair efficiency increased by 12% from training service team and the introduction of predictive technologies. • 21 projects have been completed on time and within budget, including a project implemented to completely modernize the control system of a rolling mill built in 1958. Have had an economy of 60000 EUR through develop optimal design and provision of detailed information to the engineering, bid team and risk management.• The reliability of equipment operation was increased by 7% and the average repair time was reduced by 14%, due to the correct organization of the stock of equipment, the introduction of predictive technologies and the organization of training for repair personnel.• As head of 5 repair and maintenance teams, improved reliability by 4% maintaining a friendly atmosphere in the team and sharing knowledge.• A list of spare parts was compiled and a stock for the enterprise equipment was formed.Daily duties:• Ensured transparency of each stage of projects.• Prepared financial reports for the company: profit and loss statements, balance sheets, income statements, yearly overhead, rate calculations, and monthly billing reports.• Performed cost analysis and prioritized project requirements.• Collection and analysis of statistical data on the operation of automation tools, RC analysis. Show less

  • Automated Control Systems Engineer | PLC, Maintenance and Projects management

    Feb 2021 - Nov 2021

  • Chief specialist to the repair department, technical condition section | Team and Project management

    Feb 2019 - Feb 2021
• 

  ISRA VISION

  Dec 2021 - now

  Implement advanced and automated machine vision systems for steel, paper, and pulp production. The professional with experience in the field of Machine Vision, in a combination of Software and Hardware: calibration, cameras, lenses, lighting, MSA, commissioning and troubleshooting. Build strong communication with stakeholders. Supervisor and coordinator external contractors for mechanical, electrical and automation installation work on the side. Collaboration, consultation, and reporting to the sales, management, and design teams. Following the life cycle from design and development of order through installation and commissioning until the start of production to FAT. Team training to work with equipment and writing manuals. Having strong understanding of engineering fundamentals and ability to apply them toward manufacturing process development.• 20% faster closing of existing projects in 9 months and a 5% increase in repeat sales due to qualified support and interaction with the customer. • Reducing project lead time by 10% due to helpful pre-project research and interaction with sales and development departments.• Increase customer satisfaction by 57% due to open communication, full development and implementation of plans, timely submission of documents and reports, and qualified support.• Practical knowledge of cameras, lenses, optics, lighting, and other image capture and processing.• Experience C/C++ and Python code troubleshooting. Experience with real-time systems and generic programming is highly desirable.• Familiar with communication protocols like EtherCAT, Profinet, TCP/IP, and I/O.• Experience in document preparation and presentation (Trial report, action plan, new project presentation, etc.). Show less Actively participate in forums with our technicians, supervisors, customers, and external suppliers. The established communication, training, advice, and review for areas of disturbance allowed me to provide excellent, timeline and flexible customer service. Monitored and on towards goals, reacting to critical key path timing and anticipating issues site before escalation. • Practical knowledge of cameras, lenses, optics, lighting, and other image capture and processing.• Experience C/C++ and Python code troubleshooting. Experience with real-time systems and generic programming is highly desirable.• Familiar with communication protocols like EtherCAT, Profinet, TCP/IP, and I/O.• Experience in document preparation and presentation (Trial report, action plan, new project presentation, etc.).• Effective leading a team of subcontractors. This allowed the installation to be completed on time and reduced commissioning time. • Control, testing and approval at all stages of projects of machine vision systems. Which increased productivity by 10%.• Training of personnel to work with systems, their maintenance and troubleshooting. • Supervised installation of systems at the place of order, connection of system components, network setup, warranty and post-warranty service of machine vision systems. • Wrote procedures for technical assembly and testing of components and parts. • Management of scheduled and unscheduled repairs and maintenance of equipment. • Assistance in the preparation of as-built documentation and description of processes. Show less

  • Application Engineer | Installation, Machine vision and Customer International collaboration

    May 2023 - now

  • Application Engineer | Installation, Machine vision and Customer International collaboration

    Dec 2021 - May 2023