Nelson Motilla

Experience

• 

  IONICS ELECTRONICS MANUFACTURING SERVICES, INCORPORATED

  Apr 2002 - Mar 2003

  Process Engineer/Test Engineer

  Process EngineerController Card of the Hard Disk (PCB Assembly)Plant 3 - Cabuyao PlantDuties and Responsibilities:• Ensures that standard processes are being followed in detail and any changes are highlighted to all concerned personnel with the proper documentation.• Check that the standard requirements/specifications are followed by regular monitoring /inspection of the line.• Makes report on all items that require re- qualification, approval or inquiry from the customer.• Prepares/build sheets/diagrams/flowcharts/process controls for the use of the production line.Test EngineerCompact Disc Drive (CDD Assembly)Plant 7-Calamba PlantDuties and Responsibilities:• Provides test engineer supports to manufacturing line operations such as:a) Drive loader functionality testb) Drive laser power adjustment and writing strategy calculationc) Drive beta calibrationd) Drive scanninge) Drive failure analysis• Ensures that the quality standards and productivity are met by performing diagnoses and repairs for non-conforming products and regular application software check.• Formulates improvement actions as a result of review and monitoring of testing yield and performance analysis of drive failure.• Initiates of implementation if changes to made in testing application.• Prepares and submits summary of testing station performance and other product’s major component that requires strict monitoring and performance review.• Trains and qualifies test operators in specified testing stations and product theories, operations and testing requirements respectively.• Generates failure analysis guide or procedure to ensure systematic approach on different testing failures.• Reports any damages/losses on materials, equipment, machines and tools to Test Engineering Head or Manager.• Represents Test Engineering Section on various committee meetings and other organizational meetings when needed. Show less

• 

  WISTRON CORPORATION (formerly ACER Co.)

  Oct 2003 - Apr 2005

  Failure Analysis Engineer

  Duties and Responsibilities:• Conduct immediate failure analysis on major customer fall-out. Coordinate analysis to all concern sections so as to generate corrective actions. Report periodically to customer.• Support QC failure analysis for outgoing product audit & analysis result to PE, QAE, Manufacturing & Engineering so as to generate corrective and preventive actions..• Monitor and check our product quality issues on production line, outgoing quality control & customer side in term of pass and failure rate. Monitor top defects on customer side and find the cause of failure and generate corrective and preventive action through proper coordination with concerning section.• Maintain tools & Equipment used in failure analysis and other machines related to analysis & reliability testing. Coordinate all major problems to concern persons.• Consistently inspect the assigned work area top ensure section’s compliance to the 5’s / safety standards• Perform other duties as deemed necessary by immediate superior. Show less

• 

  WU KONG (S) PTE., LTD.

  Aug 2006 - Nov 2006

  Assistant Supervisor

  Duties and Responsibilities:• Supervises sealed insulating glass production and the workers of the section.• Monitors and controls the effective implementation of the documented procedure, work instructions and standard.• Implement proper dissemination of information/orientation to concerned persons.• Ensures that the required production meet the deadline.• Maintains order in the production.• Attend weekly and monthly quality meeting together with the Division Manager, Department Heads and assistant supervisors. Show less

• 

  SAN MIGUEL RENGO PACKAGNG CORPORATION

  Mar 2007 - Jul 2009

  Production Technician

  Duties and Responsibilities:• Set, operate and maintain Single Facer, Double Backer, Glue Mixer, Hamada RDC, and Asahi die cutter Machine used for the production of corrugated blanks and in Boxmaking.• Coordinate with different crew of the corrugating section to ensure the continuity of smooth operation.• Run the machine at the highest attainable efficiency without sacrificing the quality of the corrugated blanks.• Check the quality of the blanks at regular intervals during production. Make adjustments when non-conformance is found.• Conduct ocular inspection of machine, tools and equipment. Make minor repairs when necessary.• Maintain all established parameters within standard and report any deviation to the immediate superior or to the unit concerned.• Prepare maintenance Work Order for major machine trouble.• Assist Maintenance and Engineering crew during repair, troubleshooting and maintenance of the machine.• Maintain cleanliness of the work place and observe safety rules and regulations. Report hazard of threat to life and property to immediate superior. Show less

• 

  KING YUAN ELECTRONICS CO., LTD.

  Aug 2009 - Aug 2011

  Product Engineer

  • Analyze and verify TDN/QDN hold lots issued by the production and send report to customer after verification.• Gather data of major fail by shmoo plot, report formatter, error map and timing diagram.• Formulate corrective and preventive actions for quality problems.• Assures the testers meets the productivity and quality requirements prior endorsement.• Writes and assists in the development of test plans, test procedures, and test tools.• Assist customer in remote testing and other engineering jobs.• Make SOP(standard operating procedure) for downloading of programs in the testing equipment.• Make sure that the set up of the handlers and testers are in accordance with the run card/traveler card of the production before normal run.• Monitor the production and site yield of every handlers/testers.• Support PM in running correlation sample, fixing down machines and other setup issues.• Support production operator in downloading program issues.• Conduct running of correlation sample for new customer lot and devices in every tester.• Conduct QUAL RUN(qualification run) for NPI products.• Perform RF device calibration and RF offset after tester maintenance.• Perform other duties that maybe assigned from time to time by the immediate superior. Show less

• 

  Manila Bulletin Publishing Corporation

  Sept 2012 - Aug 2013

  Electrical Maintenance Engineer

  •Daily monitoring of press production line 1 and 2.•Troubleshoot electrical problems encountered in the production.•Perform in replacing defective electrical devices in Press units and Reel(Reel Tension Paster).•Performs daily, weekly and monthly maintenance of Press units and RTP electrical cabinets including circuit breakers, contactors, filters, fittings, power supplies, blower, ink fountain amplifiers, tightening of bolts and screws, etc.•Perform monitoring, inspection and test run of 220V and 440V Generator sets.•Cleaning of spray bars, spray bar's housing filters, nozzles and plungers.•Daily checking of 5Vdc in GE motor drivers in Press production Line1 and Line2 •Daily maintenance and monitoring of FERAG roll pack and forwarding machines. Show less

• 

  Southern Can Making Company

  Mar 2014 - Mar 2017

  Shift Supervisor(Pioneer in the company)

  • To co-ordinate the step, running and maintenance of all equipment used in the manufacture of Ends to maximum efficiency & following up of SOPs and updating.• While striving for continuous improvement ensure optimum product quality through the use of ISO and statistical process control procedures. • To monitor and control spoilages to work towards zero defects & control isolations and work on problem solving.• Co-ordinate changeovers and preventive maintenance as and when required. • Ensure all aspects of health and safety and good housekeeping & HACCP are adhered to. • To support Maintainers and Operators as required. • Assist in training of subordinates in all aspects of end manufacturer.• To liaise with Quality, Stores, Personnel and other departments for achieving the shift production requirement. • Assist in initiating, planning, executing, controlling, and closing of every projects in End making company.• Maintains and manages inventory of materials and stocked products, which include stock locations and profiles using Microsoft Access.• Coordinates with Purchasing Department regarding Purchase Request and Purchase orders of raw materials.• Follow up with the suppliers and contractors regarding the issues and requirements during equipment/machines installations, testing and commissioning.• Documents all daily activities related to production, engineering and quality.• Evaluates and makes appraisal performance reports for production manpower.• Reports directly to the plant manager regarding day to day activities and issues in the company.• Performs administrative jobs needed and required by the plant manager. Show less

• 

  Kolder: A Jeldwen Company

  Mar 2019 - Jul 2019

  Production Assembler

  • Assemble wardrobe doors using power hand tools.• Check every production job ticket and prepare materials needed prior to assembly.• Ensure all aspects of health and safety and good housekeeping are adhered to. • Attend Tool Box meeting every Wednesday which is conducted by Production Manager.• Assist co-workers and team leader in other specific jobs being assigned by the Production Supervisor.• Comply in wearing proper Personal Protective Equipment (PPE) when inside the production area. Show less

• 

  The Camerons Group

  Jul 2019 - Oct 2019

  Production Supervisor

  • Allocating and designating specific tasks to every operators and packers based on the job schedules and requirements.• Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enforcing systems, policies, and procedures.• Maintains work flow by monitoring steps of the process; setting processing variables; observing control points and equipment; monitoring personnel and resources; studying methods; implementing cost reductions; developing reporting procedures and systems; facilitating corrections to malfunctions within process control points; initiating and fostering a spirit of cooperation within and between departments.• Provides manufacturing information by compiling, initiating, sorting, and analyzing production performance records and data; answering questions and responding to requests.• Ensure Quality checking and auditing of every printing jobs.• Monitor safety and perform risk identification in the production line.• Monitor efficiency and productivity of every printing machines. Show less

• 

  I-Tel Communications Pty.,Ltd.

  Jan 2020 - Apr 2022

  Fibre Technician

  • Perform end to end installation & maintenance on Fibre to the building (FTTB), Fibre to the node (FTTN), Fibre to the curb (FTTC) and Fibre to the premises (FTTP) technologies up to Telstra Data Centres and Exchange that includes requirement gathering, procurement, planning and implementation of work.• Perform fault finding and resolving network issues and restoring of network using Ladder Trace, Optical Time Domain Reflectometer (OTDR), Visual fault locator (VFL), passive optical network (PON), and Fibre Scope.• Perform problem assessment and analysis of underground and aerial network related faults• Perform installation and configuration of premises connection device (PCD) and network termination device (NTD) • Connect fibre cable network joints (breakout joint, flexible joint locator, distribution joint locator and local joint locator) using fibre cleaver and fusion splicer and remediate any issues that will arise• Ensure to meet strict KPI's to meet customer standards and expectations.• Perform closing of ticket by providing post implementation report and related artefacts in as per job requirement• Interfaces with team members and stakeholders to anticipate and manage meeting service level agreement (SLA) requirement by National Broadband Network (NBN) network operation center (NOC) such as technical requirements, business requirements, and schedule.• Proactively comply with all WH&S requirements. Show less

• 

  Crytech Optical Pty Ltd

  Apr 2022 - Aug 2022

  Optic Fibre Technician

  • Perform fusion splicing(ribbon and stranded) and End to End testing for Ventia N2P project.• Filling out DFN and LFN link loss, insertion loss workbooks with the testing results acquired using OTDR, Power Source and Power Meter.• Organized reports and submitting all the artefacts required by NBN to my director through email.• Coordinate and collaborate with my colleague regarding the task assignments for N2P project.• Perform other job as per instruction of my director.

• 

  Sydney Trains/Chandler Macleod

  Sept 2022 - Dec 2023

  Cable Network Maintainer
• 

  NEXTDC

  Feb 2024 - now

  24/7 Data Centre Technician