Marco Melo

Marco Melo

Wire Harness Design Engineer

Followers of Marco Melo495 followers
location of Marco MeloFigueira da Foz, Coimbra, Portugal

Connect with Marco Melo to Send Message

Connect

Connect with Marco Melo to Send Message

Connect
  • Timeline

  • About me

    MSc in Mechanical Engineering | EASA Commercial Pilot | Flight Instructor

  • Education

    • CAVOK Aviation Training Ltd.

      -
      FI(A) Airline/Commercial/Professional Pilot and Flight Crew

      EASA Flight Instructor Course

    • CAVOK Aviation Training Ltd.

      -
      AUPRT Airline/Commercial/Professional Pilot and Flight Crew

      Advanced Upset Recovery Course

    • Bartolini Air

      2020 - 2021
      Commercial Pilot Airplanes Airline/Commercial/Professional Pilot and Flight Crew

      - 218h28 of real flight time (Cessna 152, Tecnam P2002 G500, Tecnam P2008JC G3X, Tecnam P2006T G1000)- 35h of FNPT II (Redbird)- During Hour Building, crossed Europe in wintertime, from Poland to Portugal and back, flying a Tecnam P2002 in VFR

    • L3 Commercial Training Solutions (CTS)

      2018 - 2020
      ATPL(A) Theory + 65h VFR Airline/Commercial/Professional Pilot and Flight Crew

      - Average of 89% obtained in the 14 ATPL Exams completed in two sittings and conducted by "ANAC - Autoridade Nacional da Avião Civil (Portugal)"

    • Universidade de Coimbra

      2008 - 2013
      MSc in Mechanical Engineering Mechanical Engineering
  • Experience

    • Yazaki Portugal

      Jan 2013 - Jun 2014
      Wire Harness Design Engineer

      Design Engineering and Manufacturing Design at Yazaki's European Technical Centre.Interaction with several Yazaki Europe Ltd. Manufacturing Plants and Customer Service Centers.Wiring Harness design for German OEMs.• Product specification and development.• Routing optimization.• Real/3D to 2D drawing conversion.• Engineering change analysis and control.• BOM creation and analysis.• Rework team instruction and support.• Manufacturing support.• VA/VE and DFM activities.Design tools:• Capital Harness• Harness XC• CAEIntensive Kaizen/Lean tools usage: NYS – New Yazaki System (based on Toyota Production System) Exibir menos

    • Valsteam ADCA Engineering S.A.

      Jun 2014 - Jan 2014
      Engenheiro da Qualidade

      Controlo de qualidade de matéria-prima recepcionada e produtos fabricados com recurso a testes destrutivos, não-destrutivos e amostragemControlo e gestão de reclamações de clientes e não conformidades a fornecedoresDefinição e operacionalidade dos objectivos da qualidadeDesenvolvimento e organização de procedimentos relativos à melhoria do processo produtivoGarantia do cumprimento das normas da PED (lei 97/23/EC)Participação no sistema de gestão da qualidade por forma a implementar e evoluí-lo Exibir menos

    • Saipem

      Nov 2014 - Jun 2018

      Coordinate activities for the implementation of Mechanical Information Systems ensuring Project data consistency from activities such as Spooling, Welding and Material Traceability Systems.Ensure the management of project quantities both for accounting purposes and progress measurement ensuring accuracy of data in compliance with standards, procedures and project requirements.Verify the implementation and use of the project management information systems for the project.Analyze and upload into project management system all data received from technical departments Exibir menos Create and update the project bill of quantities in the form of a quantity record booklet according to active and passive invoicing procedures.Update the project management database with actual data.Verify the actual quantities in order to assess both the active and passive progress measurement according with the contract in place.Supply quantitative data for the preparation of extra works and day works.Ensure the monitoring of daily man hours/equipment spent by construction contractors or indirect hiring. Exibir menos Create and update the project bill of quantities in the form of a quantity record booklet according to active and passive invoicing procedures.Update the project management database with actual data.Verify the actual quantities in order to assess both the active and passive progress measurement according with the contract in place.Supply quantitative data for the preparation of extra works and day works.Ensure the monitoring of daily man hours/equipment spent by construction contractors or indirect hiring. Exibir menos Create and update the project bill of quantities in the form of a quantity record booklet according to active and passive invoicing procedures.Update the project management database with actual data.Verify the actual quantities in order to assess both the active and passive progress measurement according with the contract in place.Supply quantitative data for the preparation of extra works and day works.Ensure the monitoring of daily man hours/equipment spent by construction contractors or indirect hiring. Exibir menos

      • Management System Coordinator

        Jan 2017 - Jun 2018
      • Quantity Surveyor

        Jan 2015 - Jan 2017
      • Quantity Surveyor

        Jun 2015 - Jan 2015
      • Quantity Surveyor

        Nov 2014 - Jun 2015
    • Fioblue Construções

      Jan 2022 - Mar 2022
      Coordenador de obra

      Direção do programa de trabalhos, desenvolvimento do planeamento semanal das obras.Coordenação das várias equipas de trabalho.Gestão dos recursos da obra.Responsabilidade pelo esclarecimento de dúvidas à fiscalização e ao Dono de Obra, assim como às diversas entidades envolvidas.Controlo dos prazos de obra, custos orçamentados e qualidade das soluções desenvolvidas.

    • MAIRE

      Jan 2022 - Nov 2023
      Subcontracts Administration Engineer

      Check in detail the accounting submitted by Subcontractors for unit prices.Verify quantities to be calculated in accordance with the drawings issued for construction and in accordance with the Methods of Measurement defined in the Subcontract.Verify the correct application of unit prices to be in accordance with the Subcontract price list, and Subcontract requirements.Verify the correctness of all calculations.Assist the Subcontract Administration Manager in all the Subcontract Administration activities with particular reference in the evaluation and verification of extra works. Exibir menos

    • Vliegschool Zelf Vliegen, Lelystad Airport

      Jul 2023 - now
      • Flight Instructor

        Jan 2023 - now
      • Flight Instructor

        Jul 2023 - Nov 2023
  • Licenses & Certifications

    • MCC

      EASA - European Union Aviation Safety Agency
      Nov 2021
    • A320F Type rating

      EASA - European Union Aviation Safety Agency
      Aug 2025
    • PBN

      EASA - European Union Aviation Safety Agency
      Apr 2021
    • FI

      EASA - European Union Aviation Safety Agency
      Jun 2021
    • CPL ME IR

      EASA - European Union Aviation Safety Agency
      Apr 2021
    • JOC

      EASA - European Union Aviation Safety Agency
      Nov 2021
    • AUPRT

      EASA - European Union Aviation Safety Agency
      Jun 2021
  • Volunteer Experience

    • Industrial Maintenance Intern

      Issued by CLIPER CERÂMICA, S.A. on Aug 2012
      CLIPER CERÂMICA, S.A.Associated with Marco Melo
    • Main Organizer Summer Course 2013

      Issued by Board of European Students of Technology on Sept 2012
      Board of European Students of TechnologyAssociated with Marco Melo