Mohd Suhaidi Abdul Karim

Experience

• 

  IKATAN INNOVASI SDN BHD

  Feb 2007 - Jun 2008

  QC WELDING INSPECTOR

  Client : FOSTER WHEELER (M) SDN BHDOWNER : PETRONAS PENAPISAN MELAKAProject involved:  PIPING PACKAGES OF MG3 LUBE BASE OIL PLANT AT PETRONAS PENAPISAN MELAKA.Responsibilities:• Established, implement, and maintains the Quality Management Program.• Identify quality related to concern and to recommend, initiate and verify corrective actions in all functional area.• Auditing the system and advising of non-compliance, requesting corrective action and reporting the management• To ensure all construction and fabrication follow specification and client requirement. (Material inspection, welding inspection, dimensional checking, line check, WPS and WQT, documentation, etc)• Coordinate all NDT activity (MPI, PT, RT, PWHT, Hardness test, etc) Show less

• 

  KEB VENTURES SDN BHD

  Jul 2008 - Oct 2009

  QC WELDING INSPECTOR

  Client : FOSTER WHEELER (M) SDN BHDOWNER : PETRONAS PENAPISAN MELAKAProject involved:  PIPING PRE-FABRICATION (OFFSITE) CARBON STEEL FOR PSR-2 REVAMP PROJECT AT PETRONAS PENAPISAN MELAKA.Responsibilities:• Established, implement, and maintains the Quality Management Program.• Identify quality related to concern and to recommend, initiate and verify corrective actions in all functional area.• Auditing the system and advising of non-compliance, requesting corrective action and reporting the management• To ensure all construction and fabrication follow specification and client requirement. (Material inspection, welding inspection, dimensional checking, line check, WPS and WQT, documentation, etc)• Coordinate all NDT activity (MPI, PT, RT, PWHT, Hardness test, etc) Show less

• 

  ABS CONSULTING (M) SDN BHD

  Feb 2010 - Aug 2011

  TECHNICAL REPRESENTATIVE/FREELANCE INSPECTOR

  I am employed as Engineering Inspector reporting to industrial Manager under the Supply Chain Department. I’m responsibility cover the following as described:1. To perform all aspect of inspection, services/testing independently as a competent.2. To perform other general inspection/services.3. Verification procedures (WPS/PQR/WPQR/WQT) including witness the NDT/DT for procedures qualification and another related 3rd party inspection requirement.4. Verification on-Destructive Testing such as Hydro test, Ultrasonic Testing (UT), Magnetic Particle Inspection (MPI), Dye Penetrate Testing (PT), Radiographic Testing (RT), Radiographs Interpretation5. Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as manufacturer data record (MDR)/DT and NDT report, welding procedures (WPS) etc. 6. Site/workshop/plant/yard/offshore platform quality surveillance, sub-contractor supervision and monitoring. 7. Witnessed/performed/review/verified inspections activity between clients, client’s representatives, auditors, 3rd party inspector, DOSH etc.8. Third party inspections of steam boiler and pipelines. Show less

• 

  TL OFFSHORE SDN BHD (SAPURACREST)

  Jun 2010 - Jul 2011

  QC WELDING INSPECTOR

  1) Monitor Installation, Welding and NDT activities on and follows ITP activities and AFC drawing. Prepare all Inspection report and submit to QC Supervisor for review.

• 

  PETROFAC E&C SDN BHD

  Aug 2011 - Nov 2011

  WELDING/NDT INSPECTOR

  Employed as a client inspector/representative for Petrofac E&C as Welding & NDT Inspector on Berantai project. 1. . My duties where to monitor the contractor were adhering to contract specification, procedure, carrying out verified, monitoring , reviewed and witness WPS, WQT, Welding, Ndt, Pipe laying and Diver activity, certificate and calibration of material, and equipment related to the job. Sign and reviewing all activity report and final documentation before being submitted to my CSR.Project Involve: BERANTAI FIELD DEVELOPMENT MALAYSIA1. 12" X 30KM ANDR-A TO PLET GAS EXPORT PIPELINE INSTALLATION. 2. ANCHOR, MOORING CHAIN AND PRE-TENSIONING INSTALLATION.3. BWHP-A JACKET, PILES AND BWHP-A TOPSIDE FABRICATON AND INSTALLATION.4. 12" RISER AND SUBSEA SPOOLS INSTALLATION. Show less

• 

  DAEWOO INTERNATIONAL CORPORATION (Secondary GL NOBLE DENTON MALAYSIA)

  Dec 2011 - Mar 2012

  WELDING INSPECTOR

  INDEPENDENT VERIFICATION BODYSCOPE OF WORK:Employed as a client inspector/representative for Daewoo International Co Ltd as Welding & Pipeline Inspector on SHWE FIELD DEVELOPMENT MYANMAR PROJECT AT RAMREE ISLAND.( As a Project Management team - PMT).1. Review the fabrication, construction and testing procedures to verify that the construction method / procedures are safe. 2. Carry out QA/QC audit and verify / witness inspection & testing carried out at the sites. 3. Monitor and assist in the proper rectification of the deficiencies found. 4. Audit and spot checking of NDT, welder qualifications, painting, dimensions, material certificates, calibrations, static and etc to verify compliance.5. Carry out QA/QC audit, verify / witness inspection & testing carried out during construction/fabrication. 6. Issue certificate of compliance upon completion of fabrication and construction. 7. Ensure compliance with the contract specifications and approved procedures.Project Involve: SHWE FIELD DEVELOPMENT MYANMAR1. 32” ONSHORE EXPORT PIPELINE FROM LANDFALL (AT RAMREE ISLAND) TO ONSHORE GAS TERMINAL (OGT).2. PIPING AND STRUCTURAL OF ONSHORE GAS TERMINAL (OGT) RAMREE ISLAND Show less

• 

  PETROFAC MALAYSIA PM304 LIMITED (PML)

  Mar 2012 - Sept 2013

  WELDING/NDT INSPECTOR

  SCOPE OF WORK:As a client inspector for PML as Welding & NDT Inspector.( As a Project Management team - PMT).•Monitor contractor compliance with key quality procedures and documentation relating to Contract work packages, ensuring contractor conformity with contract quality requirements, relevant Codes/Standard •Oversee the work package scope within the parameters of the approved project documentation, ITP.Attend progress meetings with Contractors. •Participate in Quality Reviews & Audits of contractors facilities, verification of process documentation to ensure compliance to agreed contract documentation.•Witness on contractor WPQT/ WQT, perform general inspections including: material receiving inspection / documentation and certificate review, in process manufacturing inspection (including Welding process review interventions/Fabrication/NDE operations),FAT,Coating,punch listing,as-built preparation, and final documentation review and equipment release all in compliance with the requirements.•Prepare Daily/weekly Quality Reports.Any other activities requested by the Lead Quality Engineer•Ensure that Company HSSE expectations are met and monitor Contractors performance against agreed HSSE Management plan.Project Involve: WEST DESARU & CENDOR PHASE 2 DEVELOPMENT MALAYSIA (ONSHORE & OFFSHORE)1.FABRICATION JACKET, PILES & TOPSIDE (CDW-B,CDW-C & WEST DESARU) & SUBSEA STRUCTURE ,PLET,MID WATERARCH,PIPING SKID,LAUCHER.2.FABRICATION JACKET,PILES & TOPSIDE (CDW-B & C)3.INSTALL 8”X3.326KM GAS LIFT INJECTION PIPELINE CDW-C TO CDP-A4.INSTALL 8”X3.321KM WATER INJECTION PIPELINE CDW-C TO CDP-A5.INSTALL 8”X1.617KM GAS LIFT INJECTION PIPELINE CDW-B TO CDP-A6.INSTALL 8”X1.635KM WATER INJECTION PIPELINE CDW-B TO CDP-A7.INSTALL 8”X13.686KM CRUED PIPELINE FROM WEST DESARU TO CDP-A8.INSTALL ANCHOR PILE&MOORING CHAIN FOR CDP-A FPSO9.INSTALL 2 NOS(CDW-B&CDW-C) PLET10.TRANSPORTATION W.DESARU SUBSEA STRUCTURE AND TOPSIDE. Show less

• 

  Flinders Ports Pty Limited (Secondary Applus Velosi Australia)

  Jul 2013 - Sept 2013

  GENERAL INSPECTOR (CLIENT REPRESENTATIVE)

  Project Involve: OUTER HARBOUR BERTH 4 FUEL FACILITY UPGRADE (BARE PILES)Duties and Responsibilities include:• Monitor and report on Vendor/sub vendor compliance with key quality procedures and documentation relating to Contract work packages, ensuring Subcontractor / Supplier conformity with contract quality requirements, relevant Codes/Standards and good site practices • Oversee the work package scope within the parameters of the approved project documentation, quality plans and Inspection and Test Plans. • Perform visual & dimension inspections on welded products and structures in progress and on completed jobs.• Monitor welded products to ensure that they meet specifications for dimension.• Monitors Vendor/sub vendor Quality Welding, NDT inspection & Coating/Painting activities on the yard, and ensure they are in conformance with Project requirements.• Issues NCR related to Welding, NDT, and Coating &Painting.• Prepare Pre inspection meeting, Inspection Reports and Inspection release certificate. Show less

• 

  Chevron

  Oct 2013 - Dec 2015

  QA Welding / NDE

  Project Involve: ISBL MODULE FABRICATION FOR WHEATSTONE PROJECT LNG PLANT( As a Project Management team - PMT).Interface Scope:•Reports to the Module Site QA Team Lead..•Assists and interfaces with Quality Advisor, Module Site QA Team Lead&Comp discipline inspectors, CPY Project,quality,Contractor personnel.Tech Scope:Assist with development of quality plan and work procedures for Module Site Quality.Audit&monitor Contractor quality to verify competency and compliance with work procedures & project req.Participate with Contractor quality personnel in insp,testing activities to assure that ITP are being followed and project requirements met. Primary participation and assurance responsibilities shall be not limited to:•Review&become familiar with Contractor WPS, PQR, Weld Maps, and Welder PQR, NDE procedures&Personnel Qualifications, Review/Monitor MTR for welding consumables,receipt,storage&distribution.•Witness/monitor WPT testing and welder performance qualification testing, welding quality on a daily basis per applicable PQP,ITP,code,specs and PMI of piping components and completed weld deposits.• Monitor back-purging for s.steel weldments and verify the usage of “Pre-Use” tested s.steel welding consumable for all stainless steel weldments in cryogenic service.•Monitor&Witness fit-up,welding,NDE of single weld hook-ups&closure,verify welds usage of impact tested welding consumable for all C/S weldments in low temp service.•Monitor&witness in-process NDE such as PT, MT,HT, PMI, etc.Review RT Film random sampling basis, PWHT. Review PWHT charts&documentation,HT,pneumatic pressure testing. Review pressure test charts&doc.,Monitor welder repair statistics for the purpose of analyzing trends and implementing corrective action.•Monitor/ Witnessed NCR&ensure Contractor is handling disposition correctly, insp/testing activities and issue insp reports as required.• •Attend weekly meetings with Contractor quality personnel to discuss ongoing quality activities. Show less

• 

  Intertek

  Mar 2016 - Mar 2016

  CROSS CHECKER RADIGARPHIC INTERPRETER

  Duties and Responsibilities include:• Cross checker / Review all RT FILM (Radiographic interpreter) as a independent Third Party

• 

  TNB WESTERN ENERGY (SECONDED BY BUREAU VERITAS MALAYSIA)

  May 2016 - Nov 2016

  SITE QUALITY INSPECTOR (PIPING/STRUCTURAL/NDE)

  POSITION: SITE QUALITY INSPECTOR Project Involve: FAST TRACK 3A 1X1000MW COAL FIRED POWER PLANT (MANJUNG 5)Duties and Responsibilities include:• Surveillance general inspection at site (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT) at BOILER, TURBAINE AND PRESSURE PART.• Review all QC report and NDT before hydro testing.

• 

  PETRONAS TECHNICAL SERVICES SDN BHD

  Dec 2016 - Dec 2018

  WELDING/NDT PIPING INSPECTOR

  POSITION: PIPING INSPECTOR ( As a Project Management team - PMT).Project Involve: PENGERANG COGENERATION POWER PLANT RAPID (PCP)Duties and Responsibilities include:• Surveillance general inspection at site (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT) at BOILER, TURBAINE AND PRESSURE PART.• Perform the incoming material inspection.• Surveillance or monitor on-site welding procedure qualification testing and/or welder performance qualification testing.• Review and become familiar with Contractor / Sub-Contractor NDE procedures and NDE Personnel Qualifications.• Surveillance and Review Material Test Reports for welding consumables.• Monitor welding consumable receipt, storage and distribution.• Monitor & Surveillance check the fit-up and welding quality on a daily basis per the applicable Quality Control Plan, Inspection & Test Plan, code, and specifications.• Surveillance visual inspection on a random sampling basis of in-process and completed weld deposits.• Review all QC report and NDT before hydro testing.• Perform the line-check and reinstatement for the piping system. Show less

• 

  ACES-GQS ASIA PACIFIC CORP

  Jun 2018 - Jul 2018

  QA/QC – Vendor Inspector

  Specialization : Engineering - Oil/GasIndustry : Oil & Gas / PetroleumDuration : June 2018• Company: CB & I Position: QA/QC – Engineering/3rd party Inspector/Vendor InspectorProject : Duke Asheville Vent SilencerClient/Vendor : Aarding Thermal Acoustic / Bennova Mechanical Engineering Sdn BhdEquipment : 2 units of Steam Turbine Drains Tank Vent SilencerJob Description : Performed inspection of material receiving, fit-up, final visual, dimensional, painting, packing before Shipment & documentation review. Show less

• 

  TÜV SÜD Malaysia

  Jan 2019 - Feb 2019

  Welding/NDT/Vendor/3rd party/Site Inspector

  I am employed as Engineering / Vendor/ 3rd party Inspector reporting to industrial Manager under the Supply Chain Department. I’m responsibility cover the following as described:1. Representatives, auditors, 3rd. party inspector, DOSH etc.2. Third party /inspection at site and vendor as per ITP/NOI (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT) at STEAM BOILER, MECAHNICAL EQUIPMENT, PRESSURE VESSEL, PIPING SKID, TURBAINE AND PRESSURE PART/HEAT EXCHANGER3. Verification on-Destructive Testing such as Hydro test, Ultrasonic Testing (UT), Magnetic Particle Inspection (MPI), Dye Penetrate Testing (PT), Radiographic Testing (RT), Radiographs Interpretation, And Witnessed Factory Acceptance Testing (FAT).4. Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as manufacturer data record (MDR)/DT and NDT report, welding procedures (WPS) etc.5. Site/workshop/plant/yard/offshore platform quality surveillance, sub-contractor supervision and monitoring.6. Witnessed/performed/review/verified inspections activity between clients, clients to perform all aspect of inspection services/testing independently as a competent.Specialization : Engineering - Oil/GasIndustry : Oil / Gas / Power• Company: JIMAH EAST POWER Position: QA/QC – Welding/NDT Inspector Project: JIMAH POWER PLANT.Duties and Responsibilities include:• Surveillance general inspection at site (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT) at BOILER, TURBAINE AND PRESSURE PART.• Review all QC report and NDT before hydro testing.• Perform line check or reinstatement for the piping system Show less

• 

  Intertek

  Feb 2019 - Jan 2022

  Welding/NDT/Vendor/3rd party Inspector

  I am employed as Vendor/3rd party Inspector reporting to Manager, I’m responsibility cover the following as described:1.Client Rep, 3rd party inspection at site and vendor as per ITP/NOI (Welding, PWHT, Preheating, NDT) at STEAM BOILER, MECH EQUIPMENT, PRESSURE VESSEL, PIPING SKID, TURBAINE AND PRESSURE PART/HEAT EXCHANGER3.Verification on-Destructive Testing such as Hydro test, NDT, Witnessed Factory Acceptance Testing (FAT).4.Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as MDR and NDT report, welding procedures (WPS)5.Witnessed/performed/verified inspections activity between clients, clients to perform all aspect of inspection services/testing independently as a competent•Company: Sumitomo Corporation Asia & Oceania Pte Ltd Position: QA/QC – /3rd party Inspector/Vendor Inspector Project: PC GABON (PETRONAS) & Gemilang-2 / Gumusut kakap (SHELL) End user: Petronas Carigali & Shell Sarawak.Equipment: OCTG Pipes.Job Descriptions: Witnessed /monitor Lifting Discharging OCTG pipes at Labuan port, Inspection physical body damage of the pipes.Company: Sapura Pinewell Sdn BhdPosition: QA/QC – Welding/NDT/ 3rd party Inspector InspectorProject: PFLNG1 Relocation & Tie in ProjectEnd user: PETRONAS CARIGALI Equipment: X65 Riser- Pipe spoolJob Descriptions: Witnessed Visual inspection & Hydrotesting pipe spool, RT film reviewCompany: HQC Engineering Sdn BhdPosition: QA/QC – Welding/NDT/Piping InspectorProject: EPCC of EURO-IV M PROJECT End user: Heng Yuan Refinery Company Port DicksonJob Descriptions: Performed/witnessed final Fit-up & visual inspection, WPS/WQT, RT film review, Review WPS/WQT. •Company: Technip FMC Position: QA/QC – Welding/NDT Inspector Project: BOKOR PHASE 3 RE-DEVELOPMENT End user: Petronas Carigali Equipment: J-TUBE CENTRALIZERJob Descriptions: Witnessed Model, Dimensional, Quantity, Visual, Dimensional & Weight Control, Fit-up Test, Material Certificate review. Show less

• 

  PETRONAS

  May 2019 - Jun 2020

  Welding NDT/Piping Inspector

  Position Title : WELDING/NDT PIPING INSPECTOR ( As a Project Management team - PMT).Specialization : Engineering - Oil/GasIndustry : Oil & Gas / PetroleumDuration : MAY 2019 - June 2020Project Involve: Pipe Rectification and Re-construction RAPID PROJECT PACKAGE 2 4 UNITS (CDU, ARDS 1& 2, HCDU) CDU = CRUDE DISTILLATION UNITS. ADRS = ATMOSPHERIC RESIDUE DESULPHURIZATION UNITS 1211 & 1212 HCDU = HYDROGEN COLLECTION AND DISTRIBUTION UNITSDuties and Responsibilities include:• Surveillance general inspection at site (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT).• Perform the incoming/ material inspection. Material P5, P9, P11, Alloy 825 (Alloy steel)• Surveillance or monitor on-site welding procedure qualification testing and/or welder performance qualification testing. Material P5, P9, P11, Alloy 825 (Alloy steel)• Review and become familiar with Contractor / Sub-Contractor NDE procedures and NDE Personnel Qualifications.• Surveillance and Review Material Test Reports for welding consumables.• Monitor welding consumable receipt, storage and distribution.• Monitor & Surveillance check the fit-up and welding quality on a daily basis per the applicable Quality Control Plan, Inspection & Test Plan, code, and specifications.• Surveillance visual inspection on a random sampling basis of in-process and completed weld deposits.• Review all QC report and NDT before hydro testing.• Perform the line-check and reinstatement for the piping system.• Monitor/Witnessed Flushing & Hydro testing, valve installation. Show less

• 

  TUV RHEINLAND MALAYSIA SDN BHD

  Jul 2020 - Dec 2021

  Lead Inspector Independent Inspection Agency (Acting QC Inspection Engineer)

  Specialization : Engineering – Construction Steel StructuralDuration : JULY 2020 - Present• Company: ARUP CONSULTANT Position: LEAD INSPECTOR INDEPENDENT INSPECTION AGENCY (ACTING QC ENGINEER) ( As a Project Management Consultant - PMC). Project: KL MERDEKA 118 TOWERDuties and Responsibilities include:• Attend weekly quality, progress meeting with Owner and Contractor.• Prepared Quality Weekly report and Welding repair rate report.• Monitor the inspection by Inspector and review the weekly report submitted by all inspector.• Manage the inspection activity perform by independent inspector.• Monitor/Review and become familiar with Contractor / Sub-Contractor Welding Procedure Specifications (WPS), Welding Qualification Records (PQR), Weld Maps, and Welder Performance Qualification Records.• Monitor on contractor / Subcontractor compliance with key quality procedures and documentation relating to Contract work packages, ensuring Subcontractor / Supplier conformity with contract quality requirements, relevant Codes/Standards and good site practices.• Oversee the work package scope within the parameters of the approved project documentation, quality plans and Inspection and Test Plans.• Participate in Quality Reviews & Audits of contractors / supplier’s facilities, verification of process documentation to ensure compliance to agreed contract documentation (Where applicable)• Monitor general inspections including: material receiving inspection / documentation and certificate review, in -process manufacturing inspection (including Welding process review interventions / Fabrication / NDE operations), Painting and final documentation review and equipment release all in compliance with the requirements.• Any other activities requested by the Resident Engineer.• Ensure that Company HSSE expectations are met and monitor Contractors performance against agreed HSSE Management plan. Show less

• 

  TUV NORD MALAYSIA

  Feb 2021 - Feb 2022

  Client/3rd party/Vendor Inspector

  I am employed as Client / Vendor/ 3rd party Inspector reporting to industrial Manager under the Supply Chain Department. I’m responsibility cover the following as described:1. Representatives, auditors, 3rd. party inspector, DOSH etc.2. Third party /inspection at site and vendor as per ITP/NOI (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, PAUT) at STEAM BOILER, MECAHNICAL EQUIPMENT, PRESSURE VESSEL, PIPING SKID, TURBAINE AND PRESSURE PART/HEAT EXCHANGER3. Verification on-Destructive Testing such as Hydro test, Ultrasonic Testing (UT), Magnetic Particle Inspection (MPI), Dye Penetrate Testing (PT), Radiographic Testing (RT), Radiographs Interpretation, And Witnessed Factory Acceptance Testing (FAT).4. Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as manufacturer data record (MDR)/DT and NDT report, welding procedures (WPS) etc.5. Site/workshop/plant/yard/offshore platform quality surveillance, sub-contractor supervision and monitoring.6. Witnessed/performed/review/verified inspections activity between clients, clients to perform all aspect of inspection services/testing independently as a competent. Show less

• 

  Bosonic Inspection Services Pte Ltd

  Feb 2021 - Mar 2021

  Client Service Representative/Auditor

  I am employed as Auditor Inspector reporting to Project Coordinator and Business development manager. I’m responsibility cover the following as described:• Company: TUV NORD BAHRAIN Position: AUDITOR Inspector as CLIENT Representative End user: TUV NORD BAHRAIN Job Descriptions: Perform Audit the vendor facilities including General layout, Financial, Organization, Quality, Production the ITRMAS CORPORATION.

• 

  NK INSPECTION SERVICE CO.LTD

  Nov 2021 - Feb 2022

  Client/3rd party/Vendor Inspector

  I am employed as Client Inspector reporting to Inspection coordinator. I’m responsibility cover the following as described:• Client Representative inspection at site and vendor as per ITP/NOI (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, NDT) • Verification/Witnessed on-Destructive Testing such as Hydro test, Ultrasonic Testing (UT), Magnetic Particle Inspection (MPI), Dye Penetrate Testing (PT), Radiographic Testing (RT), Radiographs Interpretation, And Witnessed Factory Acceptance Testing (FAT).• Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as manufacturer data record (MDR)/DT and NDT report, welding procedures (WPS) etc.• Witnessed/performed/review/verified inspections activity between clients, clients to perform all aspect of inspection services/testing independently as a competent.• Company: MITSUBISHI POWER (Inspection as per NOI) Position: Expeditor cum Client representative Inspector Client / End user: Mitsubshi power Contractor: Jord International Sdn Bhd Project: Genesse, Suncorr and Newman PROJECT ( 3 projects) Equipment: Heat Exchanger Job Descriptions: Progress expeditor, in-process inspection and Witnessed/ Inspection as per ITP approved. I.e.: welding, NDT, Painting etc. Show less

• 

  Cutech Solutions & services Pte Ltd

  Nov 2021 - Jan 2022

  Client/3rd party/Vendor Inspector

  I am employed as Client Inspector reporting to Inspection coordinator. I’m responsibility cover the following as described:• Client Representative inspection at site and vendor as per ITP/NOI (fit-up/visual inspection, welding, PWHT, Preheating, Review RT FILM, NDT) • Verification/Witnessed on-Destructive Testing such as Hydro test, Ultrasonic Testing (UT), Magnetic Particle Inspection (MPI), Dye Penetrate Testing (PT), Radiographic Testing (RT), Radiographs Interpretation, And Witnessed Factory Acceptance Testing (FAT).• Produced/reviewed/verified related document in term of fabrication/construction/inspection works such as manufacturer data record (MDR)/DT and NDT report, welding procedures (WPS) etc.• Witnessed/performed/review/verified inspections activity between clients, clients to perform all aspect of inspection services/testing independently as a competent.• Company: VOPAK TERMINALS SINGAPORE LTE PTD Duration: November 2021 (1 day Adhoc witnessed as per NOI) Position: Client representative Inspector Client / End user: VOPAK TERMINALS SINGAPORE LTE PTD Contractor: NIKKISO CLEAN ENERGY & INDYSTRIAL GASES (SEA) SDN BHD Project: Arkema Ammonia and Castor Oil Facilities Equipment: MV 6000 SS L12 AMBIENT VAPORIZER (Air fin cooler) Job Descriptions: Witnessed/ Inspection as per ITP approved. I.e.: welding, NDT, Reviewed MDR document and pressure testing. Show less

• 

  Technip

  Mar 2022 - May 2022

  QC Welding and Mechanical Inspector

  Project Involve: CORAL SUL FLNG Development (Hook-up and Commisioning offshore campaign).Duties and Responsibilities include:• Surveillance/inspection onboard of the FLNG as per ITP/NOI (fit-up/visual inspection, welding, NDT) • Surveillance or monitor on-site welding procedure qualification testing and/or welder performance qualification testing.• Review and become familiar with Contractor / Sub-Contractor NDE procedures and NDE Personnel Qualifications.• Surveillance and Review Material Test Reports for welding consumables.• Monitor welding consumable receipt, storage and distribution.• Monitor & Surveillance check the fit-up and welding quality on a daily basis per the applicable Quality Control Plan, Inspection & Test Plan, Drawing, Code, and specifications.• Surveillance visual inspection on a random sampling basis of in-process and completed weld deposits.• Review all QC report and NDT.• Perform the line-check and reinstatement for the piping system and monitor/inspection surveillance FAT/SAT for Valve. Show less

• 

  PETRONAS

  Jun 2022 - Sept 2023

  Mechanical Piping Inspector ( Welding & NDT)

  Project Involve: 1.MCHE REPLACEMENT PROJECT (MLNG). As a Project Management team - PMT.Duties and Responsibilities include:•Witness inspection incoming material inspection.•Witness inspection at site & vendor facilities as per ITP (welding, PWHT, Preheat, NDT, blasting & painting) at Piping and Structural.•Monitor on-site WQT & WPS•Review & familiar with Contractor / Sub-Contractor NDE procedures and NDE Qualifications.•Performed sweeping and revalidate the test pack and all inspection report.•Monitor welding consumable receipt, storage, distribution and MTR.•Witness Flushing & HT, valve installation and Review all QC report and NDT before HT.•Perform the line-check and reinstatement for the piping system and Inspect surveillance FAT/SAT for Valve•Witness final visual & dimensional inspection, Painting, FAT, packing inspection & MDR Reviewed at Vendor workshop.2.Plant Change Project inside the MLNG Plant. (PC Department).a.EPCC for Draining facility improvement at MLNG 2 SlugCather closed drain system for Petronas LNG Complex.Duties and Responsibilities include:•Witness inspection incoming material inspection.•Witness inspection at site and vendor facilities as per ITP (welding, PWHT, Preheating, NDT, blasting and painting) at Piping, Structural and Pressurized Drain Vessels.•Monitor on-site WPQT/WPS/WQT.•Review & familiar with Contractor/Sub-Contractor NDE procedures and NDE Qualifications.•Performed sweeping and revalidate the test pack and all inspection report.•Monitor welding consumable receipt, storage, distribution and MTR.•Surveillance visual inspection on a random sampling basis of in-process and completed weld deposits.•Review all QC report and NDT before HT and Monitor/Witness Flushing & HT, valve installation.•Perform the line-check and reinstatement for the piping system and inspect surveillance FAT/SAT for Valve•Witness final visual & dimensional inspection, Painting, FAT, packing inspection & MDR Reviewed at Vendor workshop. Show less

• 

  Eni

  Oct 2023 - now

  Quality Welding/NDT Inspector

  Project Involved: MARINE XII Congo LNG Project ( As a Project Management team - PMT).Duties and Responsibilities include:•Monitor/Witness inspection incoming material inspection.•Monitor/Witness inspection at site and vendor facilities as per ITP (welding, PWHT, Preheating, NDT, blasting and painting) at Piping, Structural and Pressurized Drain Vessels.•Monitor on-site WPQT/WPS/WQT.•Review & familiar with Contractor/Sub-Contractor NDE procedures and NDE Qualifications.•Performed sweeping and revalidate the test pack and all inspection report.•Monitor/Witness welding consumable receipt, storage, distribution and MTR.•Surveillance visual inspection on a random sampling basis of in-process and completed weld deposits.•Review all QC report and NDT before HT and Monitor/Witnessed Flushing & HT, valve installation.•Monitor/Witness Perform the line-check and reinstatement for the piping system and inspect surveillance FAT/SAT for Valve•Monitor/Witness final visual & dimensional inspection, Painting, FAT, packing inspection & MDR Reviewed at Vendor workshop. Show less