Ratnapal Sagwekar

Experience

• 

  Das Offshore Engineering Pvt Ltd

  Aug 2008 - Feb 2009

  QA/QC Engineer

  Prepare list of qualified welders & WPS matrix for project. •Demolish & Install new equipments & all its related piping & instruments as per scope of work & approved to destruct & construct P & ID’s, approved GA & Layout drawings & maintain proper inspection reports & completion certificates. •Carry-out stage wise inspection such as Fit-up, Weld visual & NDE as per approved ITP. •Witness NDE (DPT, MPT, UT) as per approved NDT Plan along with Project TPIA/CA & interpret radiographs as per applicable codes & standards. •Prepare As-Built drawings using drafting software Auto-CAD for modifications done at site. Review calibration certificates for gauges & all the instruments used on-board. •Conduct Line-Check as per approved drawings & issue Mechanical Clearance Certificate with punch points if any & then proceed with Hydro/Pneumatic/Leak testing. •Witness Pressure Testing with post cleaning, drying & re-instatement as per Isometrics. Ensure proper touch-up painting for field joints. •Involved in system checks & system conformity for packaged equipments, pre-commissioning & commissioning activities Show less

• 

  SUPREME OFFSHORE CONSTRUCTION & TECHINCAL SERIVICES LIMITED

  Apr 2010 - Jan 2013

  Sr. QA/QC Engineer

  •Prepare list of qualified welders & WPS matrix for project. •Demolish & Install new equipments & all its related piping & instruments as per scope of work & approved to destruct & construct P & ID’s, approved GA & Layout drawings & maintain proper inspection reports & completion certificates. •Carry-out stage wise inspection such as Fit-up, Weld visual & NDE. •Witness NDE (DPT, MPT, UT) as per approved NDT Plan along with Project TPIA/CA & interpret radiographs as per applicable codes & standards. •Prepare As-Built drawings using drafting software Auto-CAD for modifications done at site. Review calibration certificates for gauges & all the instruments used on-board. •Conduct Line-Check as per approved drawings & issue Mechanical Clearance Certificate with punch points if any & then proceed with Hydro/Pneumatic/Leak testing. •Witness Pressure Testing with post cleaning, drying & re-instatement as per Isometrics. Ensure proper touch-up painting for field joints. •Involved in system checks & system conformity for packaged equipments, precommissioning & commissioning activities. Show less

• 

  Punj Lloyd Limited

  Jan 2013 - May 2015

  Sr. QA/QC Engineer

  •Preparation of Quality Assurance Procedures & Other related documents. •Conducting Visual Inspection of Welding & Conducting Hydro test as applicable. •Inspection of Incoming material i.e. Plates, Pipes etc. to ensure confirmation to Codes, Standards or Client Specification. •Witnessing of Destructive Testing & Non Destructive Testing as per the approved QAP (Quality Assurance Procedure / ITP (Inspection Test Plan). •Preparation & Review of Documents such as Welding Procedure Specification (WPS), •Procedure Qualification Record (PQR) & Welder Qualification Record (WQT).Qualification of Welding Procedures to meet Latest Code requirements or Clients Requirements. •Qualification of Welders & review / update their qualification as per requirements. Carry out Inspection at Vendor Site for Fabricated Components. •Proper documentation of inspection records for submission to Clients and future reference. Awareness of API 1104, DNV OS F101, ASME Sec-IX, AWS D1.1, ASME B31.3 etc. •Pre coating application inspection including inspection of surface preparation, Monitoring Coating application Process & Post Application Inspection •Witnessing quality of compressed air, weather conditions during blasting and painting. •Carrying out Visual Inspection of coated surfaces & Witnessing Holiday test and adhesion test.. Show less

• 

  Swiber Holdings Limited

  May 2015 - May 2016

  QA/QC Engineer

  •Preparation of Quality Assurance Procedures & Other related documents. • Arrange the Inspection at vendor Places and depute our TPI for Inspection of Brought out Items.• Discussed Technical issue with Client TPI and CA & Co-ordinate with them.• Mobilization of QC Personnel on board and coordinate with them for their Role and responsibility•Conducting Visual Inspection of Welding & Conducting Hydro test as applicable. •Inspection of Incoming material i.e. Plates, Pipes etc. to ensure confirmation to Codes, Standards or Client Specification. •Witnessing of Destructive Testing & Non Destructive Testing as per the approved QAP (Quality Assurance Procedure / ITP (Inspection Test Plan). •Preparation & Review of Documents such as Welding Procedure Specification (WPS), •Procedure Qualification Record (PQR) & Welder Qualification Record (WQT).Qualification of Welding Procedures to meet Latest Code requirements or Clients Requirements. •Qualification of Welders & review / update their qualification as per requirements. Carry out Inspection at Vendor Site for Fabricated Components. •Proper documentation of inspection records for submission to Clients and future reference. Awareness of API 1104, DNV OS F101, ASME Sec-IX, AWS D1.1, ASME B31.3 etc. •Pre coating application inspection including inspection of surface preparation, Monitoring Coating application Process & Post Application Inspection •Witnessing quality of compressed air, weather conditions during blasting and painting. •Carrying out Visual Inspection of coated surfaces & Witnessing Holiday test and adhesion test.. •Preparation of Final Dossier as per client Requirements. Show less

• 

  McDermott International, Ltd

  May 2016 - now

  QA/QC Engineer

  •Preparation of Quality Assurance Procedures & Other related documents. • Arrange the Inspection at vendor Places and depute our TPI for Inspection of Brought out Items.• Discussed Technical issue with Client TPI and CA & Co-ordinate with them.• Mobilization of QC Personnel on board and coordinate with them for their Role and responsibility•Conducting Visual Inspection of Welding & Conducting Hydro test as applicable. •Inspection of Incoming material i.e. Plates, Pipes etc. to ensure confirmation to Codes, Standards or Client Specification. •Witnessing of Destructive Testing & Non Destructive Testing as per the approved QAP (Quality Assurance Procedure / ITP (Inspection Test Plan). •Preparation & Review of Documents such as Welding Procedure Specification (WPS), •Procedure Qualification Record (PQR) & Welder Qualification Record (WQT).Qualification of Welding Procedures to meet Latest Code requirements or Clients Requirements. •Qualification of Welders & review / update their qualification as per requirements. Carry out Inspection at Vendor Site for Fabricated Components. •Proper documentation of inspection records for submission to Clients and future reference. Awareness of API 1104, DNV OS F101, ASME Sec-IX, AWS D1.1, ASME B31.3 etc. Show less