Mohamed Ibrahim

Experience

• 

  Khalda Petroleum Company (Apache)

  Apr 2001 - Apr 2009

  Senior Mechanical Maintenance Engineer – Gas Plant

  • Establishes preventive, corrective, and major maintenance activities for static and rotating equipment.• Plans and supervises the execution of all major overhaul work on mechanical plant and equipment include.• Investigate the chronic maintenance problems by reviewing and analyzing the problems and recommends appropriate solution to prevent recurrence.• Working with (MAXIMO) computerized maintenance management system and all related documentation including planned maintenance routine, risk assessment and isolation procedures.• Work permit philosophy and HSE awareness• Be familiar with the background and last status of the plant equipment maintenance strategy documents• Execute schedule inspection programs such as lube oil analysis, analyze equipment vibrations and participate in gas turbines schedule inspections (combustion inspection, Hot Gas Path Inspection and bearing inspection)• Preparing S/D plan for inspect the plant static equipment (Separator Vessels, shipping tanks, Condensate stabilizer & Glycol contactor).• Improve the plant mechanical equipment reliability via adequate material requisition• Overhaul management, updating and measurement of all conditions based on monitoring activities.• Issue monthly rotating equipment performance report on mean time between failures. • Record Equipment readings via condition monitoring in the history and data base of it.• Carrying out PM, CM and overhauling for centrifugal and reciprocating pumps {Ingersoll-Dresser , Goulds & NAT }• Carrying out PM & CM for I.C.E (Spark, compression ignition engine CAT and Waukesha) .• Carrying out PM, CM and overhauling for reciprocating Compressor (Mitsui Comp.)• Carrying out PM, CM for Centrifugal Compressor ( Borsig Comp.)• Carrying out PM, CM for Turbo-Expander and replacing MCS (Mechanical center section).• Carrying out PM, CM for screw air compressor oil free ( Atlas-Copco ) and replacing its high and low pressure element. Visa mindre

• 

  Methanex Corporation

  Apr 2009 - Aug 2012

  Rotating Equipment Maintenance Engineer

  • Responsible for the Quality Assurance & Control (QA/QC) activities to be followed in all Rotating Equipment during Damietta Construction Plant Site and then during normal operation; liaising with the construction, commissioning and start-up of the plant during Project phase.• Be member of the Site Construction Team, demonstrating effective overall leadership of the construction plant site.• Establish clear guidelines for the development of the best working practices for Rotating machinery Inspection function during Construction, Commissioning and Start-Up.• Carrying out Job plan and risk assessment for critical jobs and reported it to be attached in CMMS [ Maximo ] as historical file • Responsible for Check and review specifications of new materials, spares and equipment manufacture's drawings.• Responsible for carrying out trouble shooting and root cause analysis of equipment failures.• Responsible for Ensuring that the reliability and the availability of the plant equipment is meeting the assets original design criteria.• Responsible for carrying out the preventive, corrective and predictive maintenance for the different types of Rot. Equip. which can be listed as following:- 1. Steam turbines (GE THERMODYN-MANTURBO-SIEMENS-DRESSER RAND-ELLIOT) 2. Compressors (MANTURBO-SIEMENS-BOGE) .3. Pumps (BFW pumps KSB-WEIR GABBIONETA-CRYO STAR-FINDER-GOULDS- FAGIOLATI-STERLING-SUNDYNE-ALLWEILER-SULZER- ETC....)4. Fans (Forced draft and Induced draft)• Using condition monitoring system ( GE energy system 1 version 6.1)for measuring the vibration online and carrying out vibration analysis of the critical rotating equipment [ BFW pumps, Gas compressors, Air compressors and reformers Fans] • Participated in global team support in the Jan. 2012 turnaround in South America methanol plant, responsible for supervising Siemens compressors overhaul. Visa mindre

• 

  Petroleum Development Oman

  Sept 2012 - Sept 2019

  Rotating Equipment Support Engineer

  Job Title : Rotating Equipment Support Engineer in operation of Gas Directorate Responsibilities:-• Provide maintenance discipline expertise and support to the areas to ensure continuous improvement in maintenance activity/cost performance, integrity performance and equipment availability performance in the discipline• Set discipline maintenance direction and input to maintenance strategies.• Monitoring the rotating equipment (Pumps, Fans, Compressors{ GE, Siemens, Solar…Etc.} &Turbines) performance using Alert surveillance monitoring system.• Creating the pre-form of T.B. of new material requisition or vendor mob. & de-mob. Request and follow-up with financial discipline • Analyze equipment failures & recommend actions to prevent recurrence• Lead Preventative maintenance optimization (PMO) for discipline team.• Pull field Supervisors from different areas together to drive common themes• Coordinate skills matrix for field staff and identify training needs & drive training . • Support the preparation of the 90 day maintenance plan.• Provide specialist discipline expertise for e.g. trouble shooting and new projects• Provide discipline input into the Operations Reference Plans and Business Plans.• Regularly review maintenance data quality in SAP and drive improvements• Interface with technical service providers (workshop & vendors) on behalf of the interior team• Seek and implement new technologies in discipline.• Proactively manage all HSE aspects of maintenance activity execution and compliance with directorate HSE plan • Ensure healthy safeguarding systems for minimum production interruption.• Participate in all key equipment design, operability, and maintainability reviews (HAZOPs, IPFs, etc.).• Ensure that Critical Tasks related to Asset Integrity-Process Safety Management (AI-PSM). Visa mindre

• 

  OQ

  Sept 2019 - now

  • Sr. Engineer Mechanical NGLE Plant

    Dec 2022 - now

  • Rotating Machinery Engineer [N-5, Mechanical]

    Sept 2019 - Dec 2022