Igor Semenko

Experience

• 

  DEME Group

  Mar 2002 - Jun 2006

  Single Electrical Engineer

  Carry out a periodical daily maintenance (PMS) on equipment in according to the work orders system, regular upgrades of primer sensors such as magnetic, proximity, switches, transducers of family’s 4-20 mA, flow meters etc. installation and following relative commissioning of a new generation of sensors with the following, adjustment , adapting them to the reading by adjustment the relative hardware interface A deep knowledge, understanding and proficiency in the preparation of control systems of propulsion and auxiliary machinery, for operation and maintaining safe operating condition – alarms, auto change over (to stand by unit), shut down, lock out, slow down, safety interlocks.Providing electrical troubleshooting support to minimize downtime and maximize process efficiency.Providing technical recommendations based on analysis and the results of studies.Vessel 1: Trailing Suction Hopper Dredger PacifiqueEngines: Dautz, Caterpillar, Wartsila with Racal Decca, Pracsis control, engine control monitoring system, bottom doors, PS and STBD, STPM (Suction Tube Position Monitoring) system with appropriated dredge pipe position control . Drag head drive motor, winches Intermedium and Gantry winches; PS and STBVessel 2: Gravel TSHD Charlemagne Being in charge of all electrical drives etc, and sell unloader -crane – driven in two modes :Semi-auto or fully auto with appropriated conveyers – horizontal, longitude and variable direction boom one.Detecting machinery malfunction, interlocking location of faults and action to prevent damage; safe isolation procedures of equipment and associatedsystems;Safe repair and maintenance procedures; fault finding and repair, testing : switchboards, electric motors, generators and DC electrical systems and equipment;Troubleshooting of the Siemens PLC (SIMATIC 101 U), Racal Decca; Praxis - main engines automation control and monitoring system; Installing the ABB DC drive cabinets of drag head dc motors (STBD PS) Show less

• 

  Transocean

  Jul 2006 - Nov 2007

  Rig Electrician

  Rig Electrician, at the J.W.McLean. Semi-submersible Drilling Rig. Main activities and responsibilities:Performing a periodic maintenance on appropriated equipment by following the STAR work orders system : Upgrading primer sensors, interfaces and transducers in according to the rig’s requirement.Following a Chief Electrician task: including unexpected faults with following rectifying of them as required. Analyses and adjustment the power sharing function between engines with relevant parameters reading and monitoring (kW, kAmps, temperature of oil, cooling water, oil flow, exhausts gas, air pressure etc.)Performing maintenance on MCC panels shale shaker drives: frequency driven motors (soft starter).DC winches, cranes, BOP equipment, fire and gas installation and obstruction lights; Maintenance and repair of electrical system equipment, switchboards, electric motors, generators and DC electrical systems and equipment;Detecting machinery malfunction, interlocking location of faults and action to prevent damage; safe isolation procedures of equipment and associated systems;Safe repair and maintenance procedures; fault finding and repair, testing : High Voltage equipment, Main Diesel- Generator Engines, drilling equipment and BOP ; Fire alarm system, refrigerators and air condition units, elevator.Overhauling and maintenance of all electric motors, MCC panels , lighting system. and ; SCR power convert supply system; CCTV video cameras; satellite internet & TV systems. Working within the Platform Isolation Procedures , Job Safety Analyze, and Permit to Work systems. Show less

• 

  Saipem

  Jul 2008 - Jun 2011

  Night Shift Chief Electrician

  Being in charge of AMOS PMS (preventive maintenance system);Carrying out the maintenance procedures each system such as high voltage (switch board) cabinets: 6.3kV, Drilling Package, Propulsion, Mud process, Marine winches , Cranes etc.DC motors VFD drives , controlling and monitoring systems with a dedicated interfaces and panels etc. and action to prevent any damage; Follows the procedures of: Electrical Isolation Procedures, Job Safety Analyze, and Permit to Work systems, Report Systems.Being in charge of fire, gas installation with periodical calibration and sensors replacement , PCU and RIO; Upgrading and adjustment all analogy sensors, transmitter’s and transducers family 4mA – 20mA, proximity switches, magnetic switches with accordance new generation ones including interface boards to electrically joining with the following PLC input module . Show less

• 

  Odebrecht

  Jul 2011 - Jun 2013

  Electrical Supervisor

  I was join on board at the final phase of shipbuilding at the Korean shipyard (DSME).Main activities and responsibilities: Since this time, I have been involved in many pre commissioning and commissioning procedures on the Daewoo ship yard. Perform overall supervision of pre commissioning and commissioning activities on all electrical system :handles pre commissioning/commissioning activities and finale test of automation systems equipment such as high voltage 11kV switchboards; PS, Middle , STBD. VMS – Kongsberg (power sharing system), Main DC/VFD switch board; Main Engines “STX” automation , stand- by function, Thrusters power sharing and automation. DP -3 class/test - sea trial. ESD: 0- 5 levels, fire and gas system etc. After delivery term, I have organized and performed a lot of modification in according to the” Petrobrass” Company.To interface with commissioning activities and accept electrical systems into the service; completing pre and post energization checks, developing test schedules and Quality Control records , ensuring safe working conditions, investigating problems, diagnosing/repairing unexpected faults:Supervise with vendors the final testing and tuning of equipment, load shedding and monitoring that responding via network ship control system Ensuring the work and implementation meets the design criteria.Organizing and managing the daily work orders in according to the STAR (PMS) equipment system Responsible for planning and leading the daily activities of my team that is carrying out the electrical maintenance on equipment and system.Ensuring adherence to all applicable safety policies and procedures.Supervising of all electrical procedures and coordinating the daily activities of the electrical department:: Electrical Isolation Procedures, Job Safety Analyze, and Permit to Work systems.Identifying staff - training needs.Carrying out root cause analysis to identify and eliminate the cause of any electrical failures Show less

• 

  Saipem

  Sept 2014 - Aug 2017

  Electrical Quality Maintenance Supervisor Team Leader

  Main activities and responsibilities:Being in charge for the electrical Inspections, Maintenance Plan (PMS) commissioning/decommissioning of related equipment for all Saipem Rigs: offshore and onshore. Performing Hazardous surveys (ATEX program) with relevant Commissioning/Decommissioning action on the Ex equipment for all Saipem Rigs: land drilling rigs and Jack-up, in accordance with the Maintenance (PMS) Program, ensuring safe working conditions, investigating problems, diagnosing/repairing faults; writing reports and documentation as required.Surveying and managing the maintenance plan for the electrical equipment and installation of electrical components and systems on the Rigs. Conducting audits on all electrical equipment. Managing an electrical staff and coordinating the daily activities of the electrical department.Provides engineering leadership and support to the Electrical Maintenance teams for achieving Electrical system/equipment security, integrity and reliability. Engineering guideline encompass providing professional advice on Maintenance strategies, resolution of complex problem while a regular operation on equipment etc.Scheduling daily work in according to the present situation:Improving maintenance procedures (Work Orders): rectify them in according to a type of equipment, providing the technical expertise what was needed to solve the electrical hardware issues.Responsible for planning and leading the daily activities of our team that is carrying out the electrical maintenance on equipment, new installations and correspondence modifications.Utilizing preventive maintenance procedures to reduce unscheduled downtime.Onshore Rigs101;102; 201; 202; 5829; 5832; 5846; 5851; 5865; 5891; 5915; 5917; 5962; 5964; 5970; 5971; 5972; 5974; 5898; 5894; 5859; 302; 303; 5914; 5820; 5868; 5969; 5892.Offshore rigs :PERRO NEGRO 7; PERRO NEGRO 5; PERRO NEGRO 2. Show less