Sabeer Ahamed

Experience

• 

  Swiftech Engineers India Limited

  Jan 2010 - Dec 2011

  Instrument Supervisor

  Maintenance of Field Instruments.Supervise the Installation of Field Instruments like Pressure, Flow, Temperature, and Level Transmitters using Hook-Up Drawings.Experience in Preparation of Field instrument Data sheets, Material Requisition, Technical Bid Evaluation, Sizing and Calculations etc.Documentation, Raising RFI and combine with Maintenance Personnel for the proper handover of the Project.Follow the QC Procedure for the Proper Installation of Field Instruments, Junction Boxes and Tubing for the Instruments as per the Site Requirements and Standards. Show less

• 

  Galfar Almisnad Engineering & COntracting WLL

  Feb 2012 - Feb 2013

  Instrument Engineer

   Can study all the drawings such as P&ID, Instrument termination, Cable Schedule at the time of Erection and supervise all the activities with my sub-ordinates as per the company Safety Procedure. Preparation of as built drawings from the site and submit all the as built mark up to the client in the time of commissioning. Erection & Commissioning of all the Fire & Gas Detectors such as Gas monitors, H2S monitor, Fire Detectors and Receivers and manual call point alarm etc. Calibration of Pressure Transmitter, Temperature Transmitter, Level Transmitter and Flow Transmitter by 375, 475 HART Protocol. Calibration of Pressure Safety Valve (PSV), Temperature Safety Valve (TSV), Control Valve. Supervise all the activities like the Cable Laying, Glanding and Termination and Instrument Installation for Instruments and Junction Box (JB) as per the client Safety Procedure. Got some experience in YOKOGAWA DCS, SIEMENS Simatic OP27, Status Vision SCADA during the time of commissioning. Having good knowledge of Loop Checking with my technical team during the time of Shut Down and Pre-Commissioning Time. Also have some experience by worked as QC Assistant for the Preparation of RFI & ITR. Review Typical Stanchion Drawing as Per site condition for Fabrication. Pre check all the Panel wirings are as per drawing. Raise RFI for all Construction, Testing and Commissioning Activities. Coordinate with Client for Demolition Activities. Pre site survey to study the system and finalize the layout drawings. Planning the manpower, materials, tools, shutdown activities for the successful execution and completion of the project. Executing the job as per the approved construction drawings and QC Procedures.  Supervise all the activities like Pneumatic and Impulse Tubing from Instruments. Show less

• 

  Descon Integrated Projects Limited (DIPL)

  Mar 2013 - Feb 2014

  Instrument Engineer

   Supervision of all the activities from cable laying, PVC Stub-ups, Tray Routing, Stanchion Installation, Glanding & Termination to Pre-Commissioning. Co-ordinate with Clients from Saipem for the proper running of the projects. Erection & Commissioning of F&G, Telecom and Electronics Instruments. Pre-Planned all the materials, manpower as per the client requirements and supervise the work as per company safety procedures. Raise RFI for all the construction activities, testing of cables and commissioning activities. Carries out routine checks and calibrations of a wide variety of analyzers in the ammonia, urea and utility plants such as H2S and O2 analyzers, gas chromatograph, pH meter, infra red and thermal conductivity analyzers etc. Ensures the proper care and maintenance of all equipments and that proper housekeeping is carried out in the field after maintenance. Show less

• 

  Cyclect Holdings Pte Ltd

  Mar 2014 - now

  Construction Manager ( Electrical & Instrument )

  1. Erection & Pre - Commissioning of all the field instruments in SOXAL, J12, Air Liquide Project.2. Erection & Commissioning of MCC Panel ( 440V, 690V ).3. Involve with my Project Manager during the As-Built and submission of the documents to the client.4. Successfully Completed the Erection & Commissioning of Electrical, Instruments and Control Systems at Neste Oil, TurnAround-2014 Project.5. Handling all the types of Electrical & Instrument Field Commissioning, Erection of new instruments, dismantling, Electrical heat tracing, etc.6. QCP Submission, and reporting of finished activities to the Client. Show less