Idrish Khatri

Experience

• 

  Sardar Patel Renewable Energy Research Institute

  Jul 2013 - May 2014

  Research Intern

  Design Development & Performance Analysis of Solar Assisted Waste Water Evaporation System

• 

  Zam Zam Steel Industry

  Jun 2014 - Dec 2014

  Engineer

  • 3D modeling for cotton baling machine on Solid Edge software.• Structural analysis of cotton baling machine on Ansys software (Static structural analysis of rigid supports for system).• Calculation for fluid flow & power required in hydraulic cotton baling machine.• Selection of pumps for hydraulic system.• Selection of piping for hydraulic system.• Sizing of piston, cylinders, and its stroke length.

• 

  Cryogas Equipment Private Limited

  Jan 2015 - Apr 2017

  Project Engineer R&D

  • Thermal analysis (Heat Transfer Calculation) of cryogenic equipment (Vacuum insulated cryogenic pipes & vacuum insulated cryogenic tanks), using analytical method and ANSYS fluent, CFD software. • Fluid flow analysis of vacuum insulated piping in order to determine pressure drops of flowing fluid at the inner pipe ( pressure drop due to friction, branch section & bends).• Calculation for insulation thickness and vacuum requirements between the two pipes to avoid convection heat transfer. (Insulation of VJ pipe & storage tanks)• Thermal stress analysis of piping (Estimations of thermal contraction and expansion due to temperature variations) and allot require metallic bellows as per EJMA Standards to the inner pipe spool.• Helium leak test for vacuum insulated cryogenic pipes & vacuum insulated cryogenic tanks, using mass spectrometer to determine vacuum leakage.• Heat duty calculations for ambient air vaporizers (Ambient air to cryogenic liquid heat exchanger) for the sizing of aluminum fins and pipes.• Calculations and simulations of heat exchanger using HTRI & ASPEN software.• Also involve in designing of cryogenics equipment and ambient air vaporizers (Ambient air to cryogenic liquid heat exchanger) as per ASME & ANSI code & TEMA.• 3D Modeling of VJ Pipes on Solid Edge and CATIA software.• Attend technical meetings with clients & understand their requirements. • Review of tender documents (P&ID, PFD, datasheet, etc.) Show less

• 

  Spectoms Engineering Private Limited

  May 2017 - Sept 2017

  Design & Project Engineer

  • Responsible for cost estimation and project planning for turnkey grain storage silo projects. • Project management and Project scheduling .• Review of tender documents & prepare techno commercial offers for turnkey projects.• Meeting with clients & understand their requirements.• Prepare PFD's & project layouts as per client requirements for proposal.• Structural analysis of support for silos using Ansys structural .• Review of project scope and budget documents.• Approach vendors and their management. Show less

• 

  Sahaba Engineering And Constructions

  Dec 2017 - Apr 2019

  Senior Engineer

  • Project management and Project scheduling.• Responsible for cost estimation and project planning.• Supervision of commissioning and erection work.• Prepare drawing on AUTOCAD.• Review of tender documents & prepare techno commercial offers.• Meeting with clients & understand their requirements.• Prepare PFD's & project layouts as per client requirements for proposal.• Review of project scope and budget documents.• Approach vendors and their management.• Travels to site as and when required for supervision of work. Show less

• 

  L&T-Power

  Apr 2019 - Jul 2022

  Mechanical Engineer

  • Prepare Input data list and Boundary conditions for CFD Analysis of FGD inlet and outlet duct and review the CFD analysis results in order to provide modifications in duct to achieve desired pressure drop and velocity distribution.• Validate the CFD results with theoretical calculations.• Prepare CFD report and present it to customer.• Pipe sizing for compressed air system.• Prepare line list with process parameters.• Develop and review of P&ID's, PFD's and control write up for various FGD projects.• Resolves customer comments and prepare deliverables.• Hydraulic calculation and Sizing of Pump and Pipes (Water and slurry line (FRP & CSRL)).• Control Valve sizing.• Responsible for various packages for FGD project: PHE, Alkali dosing tank and HVAC system.• Preparation of Technical Specification for assigned Packages.• Preparation of HVAC Requisition (MR / PR, Bill of quantity, Scope table)• Identify plant area for Air conditioning, Wet ventilation and Dry ventilation systems.• Prepare Heat load calculation and selection of equipment and review of Ducting layout and its design.• Vendor Offer Evaluation• Preparation of Technical Bid comparison• Coordination with interface for Internal Deliverable (Electrical Load, Civil work volume, Utility requirements)• Coordination with Client, Vendors, Internal Disciplines, Procurement, Project Management Team.• Participation in Review Meetings, monitoring of Progress / Schedule and Man-hours• Provide process parameters to procure various instrument.• Prepare load list of entire project in order to provide inputs for transformer sizing.• Participate in design review meetings with the clients• Preparing technical proposal development and carrying out techno-commercial discussion with client• Conduct documents review with client• Assist Discipline Head for the continuous improvement and deployment of working procedures, best practices and projects feedback Show less

• 

  Black & Veatch

  Jul 2022 - Jan 2023

  Mechanical Engineer

  • Responsible for system design, sizing, and relevant calculations.• Preparation of P&ID's using software, Bentley Open Plant PID.• Line sizing, Pump sizing and control valve sizing using Software, AFT Fathom.• Calculation for Freeze protection and Thermal insulation thickness for pipes and tanks per ASTM C680-10 and using 3E Plus Software.• Preparation of Line list, Valve list, Instrument list & Equipment list with process parameters.• Resolves customer comments and prepare deliverables.• Preparation of Technical Specification for assigned Packages (Pumps and valves).• Vendor Offer Evaluation and Preparation of Technical Bid comparison• Coordination with other discipline for Internal Deliverable (Electrical Load, Civil work volume, Utility requirements)• Coordination with Client, Vendors, Internal Disciplines, Procurement & Project Management Team.• Prepare and present technical data to internal and external customer.• Review & Technical Evaluation of the vendor’s detail drawings.• Review of Tender documents.• Co-ordinate among project team members on technical matters. Show less

• 

  Virginia Transformer Corp

  Feb 2023 - now

  Mechanical & Thermal Development Manager

  • Perform Thermal Analysis to support new product developments.• Design & development of cooling systems, for transformer & other power electronics products with emphasis on Thermal Engineering. Work with cross-functional PCB, Electrical, Regulatory and Industrialization Engineers.• Perform Thermal and Mechanical Simulation using ANSYS software. • Lead a team of Mechanical & Thermal (CFD) Engineers to deliver full product from conceptual phase to mass-pro. • Thermal layout, design and cooling solutions for power converters.• Heat dissipation solutions using natural & forced convection, Hybrid cooling with Air & Liquid.• Sizing and selection of pump, fan, heat sink, heat pipes, spreader plates, cold plates.• Material selections to meet safety, functional and cost requirements. Show less