Experience

• 

  Ramunia fabricators sdn. bhd (huc division at kemaman, trg.)

  Apr 2006 - Jan 2008

  Qc technician

  - For Hook-up & Commissioning (HUC) Contract Packages Ramunia with Talisman Malaysia Limited (PM3 Field in area Malaysia-Vietnam Border) Platform Bunga Raya – BRA, BRB, BRC & BRE.- Responsibilities in Hook-up/Installation & Commissioning of piping and structural at the Bunga Raya platforms.- Assist QC receiving, check and inspect all materials and equipments from Onshore Kemaman Supply Base (KSB). Preparation and packaging of ship-out all the items to be sent to Onshore KSB.- Assist QC in inspection works, documents preparation for QA/QC scopes and reports start from materials receiving, fabrication works, hydro-testing until painting completed.- Assist QC for Hydrotest Technician and preparation of equipments and pipe spools for hydrotest works.- Assist QC to monitor and control welding activities such as electrode baking, electrode issuances, make sure only qualified welders on the job and monitor that all production weld is according to WPS and approved welding sequence.- Assist QC and Welding Engineer to conduct (WPQT), develop, qualify and establish several of Welding Procedure Specification (WPS) according to AWS D1.1, ASME IX and API 1104 with various kinds of material and consumables.- Assist QC to review NDT report like RT, UT, MPI & DPI and radiographic film. Show less

• 

  Adv commercial skill sdn. bhd

  Jul 2010 - Jun 2011

  - Service and maintenance of water tank at ABBAS Konsortium Putrajaya. - Re-qualification of the 3 units hoisting machine standard (Box Girder) are 1 unit double girder 5 ton over head crane, 1 unit single girder 3 ton over head crane and 1 unit double girder 3 ton over head crane and commissioning by DOSH for obtaining certification at Seowong Precision Glass (M) Sdn. Bhd, Rembau, Negeri Sembilan Darul Khusus. - Deliver services to water supply industries such as Syarikat Air Johor throughout Johor, State (SAJ), Abbas Consortium at Selangor, Petronas and Gas Malaysia.- Service involve in maintaining of surge vessel, pressure vessels shout down water treatment plant and crane and also involve in setting of valve, for Petronas Gas, hydraulic telescopic arm testing and repair at KLIA. Show less - Service and maintenance of water tank at ABBAS Konsortium Putrajaya. - Re-qualification of the 3 units hoisting machine standard (Box Girder) are 1 unit double girder 5 ton over head crane, 1 unit single girder 3 ton over head crane and 1 unit double girder 3 ton over head crane and commissioning by DOSH for obtaining certification at Seowong Precision Glass (M) Sdn. Bhd, Rembau, Negeri Sembilan Darul Khusus. - Deliver services to water supply industries such as Syarikat Air Johor throughout Johor, State (SAJ), Abbas Consortium at Selangor, Petronas and Gas Malaysia.- Service involve in maintaining of surge vessel, pressure vessels shout down water treatment plant and crane and also involve in setting of valve, for Petronas Gas, hydraulic telescopic arm testing and repair at KLIA. Show less

  • Inspection Engineer (Trainer)

    Jul 2010 - Jun 2011

  • Inspection Engineer (Trainer)

    Jul 2010 - Jun 2011
• 

  Mushtari maintenance service sdn. bhd

  Jan 2012 - May 2012

  Qa/qc inspector

  1. Assist Welding Engineer to conduct (WPQT), develop, qualify and establish several of Welding Procedure Specification (WPS).2. Conduct WQT/WPQT according to AWS D1.1, ASME IX and API 1104 with various kinds of material and consumables.3. MVR on WQT/WPQT test material and checked consumables certificate. 4. Review NDT (RT, UT, MPI & DPI) report and radiographic film on WQT and WPQT test pieces. 5. Marking & witness mechanical testing.6. Monitor and control welding activities such as electrode baking, electrode issuances, make sure only qualified welders on the job and monitor that all production weld is according to WPS and approved welding sequence.7. Investigate welding repairs and counseling welders.8. Witness and inspect that all welding machines, electrode ovens and quivers been calibrated.9. Documentation on weekly welders’ performance, welder certificate and Welding Procedure Specification. Show less

• 

  Labuan shipyard & engineering sdn. bhd

  Jun 2012 - Jun 2013

  Qc inspector structural/piping

  - Material receiving including quantity, grade, certification, identification, traceability dimension, physical condition material handling and storage.- Material verifications including marking and cutting identification (transfer Heat No), dimension/edge preparation (Piece Mark).- Welding procedure specification include weld fit-up, welding consumable control, monitor, record welding, visual inspection of completed, post NDT of completed, approval of WPS matrix.- Welder qualification testing- weld fit-up, welding consumable control, monitor welding parameters, visual inspection of complete, NDT of completed welds, submit WQT certificate for client.- Removal of the turntable- Dimension, alignment, orientation, lifting procedure, change out bearing.- Replace of existing piping/structure (Fit-up)- Dimension, alignment, orientation, joint preparation, consumable control.- Visual Inspection after welding- surface defect, dimension check/distortion, cleanliness/arc burn removal, consumable control, personnel/joint identification.- Weld repair (If any)- Repair location/type of defect, gouging, correct WPS, preheat, baking and heating of electrode (welding consumable control), technique (welding processes), weather protection, welder qualification, surface condition, equipment, NDT, arc strike removal/parameter check.- Hydrotesting and Leak Test- Safety and environment precautions, flushing of lines, check equipment calibration, set up of hydrotest equipment, filling of test medium, pressurizing the lines, leakage detection, stabilization, test pressure, holding point, depressurizing the lines. - Final Documentation- Welding procedure specification, inspection and test plan, material and consumable mill certificates, material receiving and issuing report, material verification reports, fit-up reports, NDT reports, hydrotesting certificates, air leak test reports, welding control summary. Show less

• 

  Nde inspection sdn.bhd kemamam, terengganu

  Aug 2013 - Oct 2013

  Project inspector

  - Inspect and verify all piping works are accordingly to client specification / checklist.- Interpret all weldment drawing and specification.- Check purchase orders to assure that weldment materials and consumables have been properly specified.- Check and identify base and welding filler materials and consumables are received against the purchase specification.- Check chemical compositions and mechanical properties shown in mill test report against specified requirements- Investigate base metal imperfections and deviations- Check storage of filler materials- Check equipment to be used- Check weld joint preparations- Check joint fit-up.- Request NDE work when required.- Monitor and review NDE activities.- Verify the application of the approved welding procedure- Verify the qualification records for the welding procedure welders and welding operators.- Select production test if required.- Evaluate the test result against the specification.- Maintain records and prepare reports. Show less

• 

  Dayang enterprise sdn. bhd

  Jul 2022 - now

  Qa/qc lead

  Duties and responsibilities:•Organize, implement, conduct and manage the QA/QC Programs as per the Company's Quality Policy.•Coordinate the document controls of technical submittals, drawings, etc with the Project Team and to ensure that the QA/QC validation has been done, to ensure their issue, amendments and recall of controlled documents.•Coordinate all inspections, monitor the required tests and record inspections and tests made pas the Contract Plan and Contract Specifications.•Liaise with the Client's representatives for the conduct of day-to-day quality related project activities.•Coordinate with the Project Manager regarding work performance and hold authority to stop work in any area where discrepancies remain uncorrected and/or cancel the stop work order upon satisfactory correction of noted deficiencies.•Provide technical support to the Project Manager and guidance to site staff in submission of materials for approval, request for inspection, shop drawings, As-built drawings, O & M manual.•Assist QA/QC Manager in conducting internal quality audits.•Ensure that Non-Conformance Report (NCR) are raised once the activities deviated from the Contract Specifications or normal construction industry practices.•Coordinate with the project staff to compile and maintain pertinent records of inspection and testing until end of the contract and all pertinent records for retention on completion of the project.•Attend Monthly Project Review Meetings (PRM) and alert the project team of any potential problems. Show less