Xiaodi Lou

Experience

• 

  DEKRA

  Nov 2014 - Sept 2018

  Project Engineer

  EV changing station and cable certificate Project work: Carry out technical meeting, explain standard, arrange and do the test, fill in test record,test report, analyze the reasons for failure, contact customers for retest, factory inspections, document processing, and issuance of certificates.

• 

  Marquardt

  Sept 2018 - Mar 2021

  Test & LF Tuning Engineer

  Testing: Finish test with test plan then fill in test report. also analyze the failure reason and retest plan. Mainly product: PEPS ECU，E-shift and key.PEPS LF tuning: Analyze LF antenna position, design tuning logic, complete tuning and report.

• 

  DENSO （Resident in PATAC

  Mar 2021 - Sept 2021

  标定工程师

  Communicate with colleagues in North America to calibrate the interface, diagnosis, configuration and other related parameters of the body control module (BCM) and exterior light control module (ELM), complete the calibration bundle, flash into the BCM and ELM, and do bench test. Solve related problems on benches, performance tests and real vehicles

• 

  Brose China

  Sept 2021 - Aug 2022

  Calibration & System Engineer

  Performance calibrate during the development phase of the project to ensure that the products (Power liftgate, door control module, and side door drive) meet the technical requirements from customer. When there are functional issues with the product (such as function missing noisy problem, excessive speed, etc.), cooperate to solve the functional problems

• 

  科世达

  Aug 2022 - now

  系统工程师

  Be responsible for the Power Liftgate (PLG) and Central Electronic Module(CEM) project,write system requirements and divide system modules with SysML, and output them to the Basic software/application software/hardware/system testing colleagues. Communicate with customers to handle open issues, write fault analysis reports.