Lokesh B S

Experience

• 

  BTL Institute of technology

  Jun 2005 - Jul 2009

  Student
• 

  MIcrocore Solutions

  Feb 2009 - Apr 2009

  Microcontroller based Street Light Controller

  Company: Microcore Solutions, BangaloreDescription: Microcontroller Controls all the operation of the Circuit. The intensity of the day light is sensed through the LDR sensor. The Output Voltage of the LDR sensor is given to an Analog to digital converter Circuit. This would in turn convert the sensed value to digital format that can be processed by the micro controller. The micro controller checks the sensed value if it's below the threshold, then it would send signals to the RF transmitter. This would send signal to the receiving end that light have to be turned on or off. Based on the LDR sensor input the microcontroller decides whether to switch on the street lights or not. For switching on the lights the microcontroller generates a hex number and transmits through the RF transmitter. This signal acts like the control word for the switching action. In case of Cloudy Day the Control word can be transmitted by just pushing a key at the transmitter end. This switch is also known as manual control key. Whenever the switch is used the device is said to be working in manual mode. Since there are two mode's it is very efficient method to monitor street light Duration: 3 months - Conducted as a part of 8th semester (final semester of engineering) Curriculum Show less

• 

  Microland

  Sept 2009 - Feb 2010

  Service Desk Executive

  Job DescriptionWas maintaining and monitoring Enterprise and Blackberry servers for Microland clients. Being the first point of contact to the US/UK/Asia clients, I used to handle their queries related to emails and blackberry services. Was monitoring the status of servers at different locations, raise a ticket and alert my technical team to resolve the issues with the server.Handling clients through chats, calls and emails inbound and outbound.

• 

  International Institute for aerospace engineering and management ( IIAEM )

  Jan 2010 - Jan 2012

  Student of Aerospace engineering
• 

  MTech Project Work

  Aug 2010 - Apr 2013

  Electrical System simulation of a Civil Aircraft

  To design and model the technique of power transfer from ground power source to the aircraft power source with minimal power transient and minimal power interruption during starting phase of the engine on an aircraft. The technique involves tracking the phase angles and amplitude of the voltage between two power sources of an aircraft and switch when phase difference is minimal and voltage amplitude is near equal, thus reducing the power transients. The aircraft generators are first started using the GPU. It is highly recommended that during the power transfer from GPU to the Aircraft generators power interruptions must be avoided. When the voltage magnitude and phase angle relationship between the initial source and the primary aircraft source is within specified limits, the sources are ready for a no-break power transfer. Show less

• 

  HINDUSTHAN AERONAUTICS LIMITED

  May 2011 - Jul 2011

  Avionics Systems

  10 weeksDescription:Extensive study of various avionics systems such as flight control systems, flight management systems, communication and navigational systems, Cabin Systems and display systems flight critical and safety awareness systems. Avionics also encompasses a range of mission critical avionics, including electrical systems, power systems, environment systems, fire protection systems, test systems, hydraulics, landing gear and in-flight entertainment.Extensive study on Antilock Braking System of an aircraft which enables the control system to provide a suitable platform for enabling the pilot in more accurate control of aircraft deceleration, preferably still maintaining a differential braking capability. It also prevents unnecessary antiskid operation at all speeds, and which facilitates a soft onset of brake torque..Courses Attended:Duration: 15 days- Attended the FLIGHT TEST LAB course conducted by IIT (KANPUR).Conducted experiments to study the conditions and behavior of the aircraft during various maneuvers like Climb, Cruise, Descent, Turn and side slip. The various modes like dutch roll, phugoid and stall modes were studied. Experienced a manual flight which demonstrated the above mentioned maneuvers and modes. Show less

• 

  Tesco Bengaluru

  Apr 2013 - Feb 2021

  • Senior System Engineer - EAM

    Oct 2016 - Feb 2021

  • Associate

    Apr 2013 - Oct 2016
• 

  Tesco Business Solutions

  Mar 2021 - Oct 2024

  Data Management

  • Lead Project Coordinator

    Dec 2023 - Oct 2024

  • Team Lead - EAM System & Reporting

    Mar 2021 - Nov 2023
• 

  GDT - General Datatech

  Oct 2024 - now

  Project Manager