Abdul Hai Basheer Ahamed

Experience

• 

  Kanz Chemical Ind. LLC.

  Oct 2014 - Oct 2015

  Quality Control Engineer

  Sector : ProductionRoles & Responsibilities :• Monitoring the overall process of the plant including instrument installation & safety.• Participating in the instrument troubleshooting.• Project planning & execution.• Responsible for the quality assurance of the chemical products.• Participating in the R&D to prepare new chemical samples.• Testing the finished chemical products using ASTM standards.• Preparing QA/QC reports for every batch of products.• Submitting weekly report based on the variations in the quality of chemicals and a monthly report to overcome the limitations, if any.• Preparing technical data sheet & safety data sheet for the products.• Participating in preparation of purchase order, delivery order & commercial invoice & following up payment, purchase & sales information. Show less

• 

  Trans Gulf Electro Mechanical

  Dec 2015 - Jan 2017

  Trainee Engineer - ELV systems

  Project : 'Msheireb Downtown Doha (Phase 2) aka 'Heart of Doha' costs budget of 20 billion QR (5.5 billion USD).Client : Msheireb Properties, QatarFollowing are the Extra Low Voltage (ELV) areas of experience in this project :• Fire Alarm System• Disabled Toilet Alarm & Disabled Refuge Intercom• PAVA (Public Access/Voice Alarm)• BMS (Building Management Systems)• Telecommunication system • Access Control System• IDS (Intruder Detection System)• Lighting Control System • Normal, Emergency & Exit lights and power distribution through LV panel, Bus bar, SMDB, DB & MCCP. Show less

• 

  NBTC Group (Naser Mohamed Al-Baddah & Partner For General Contracting Company)

  Apr 2018 - Feb 2019

  QA/QC Inspector - Instrumentation & Telecom

  Project: KOC’s Lower Fars Heavy Oil Development Project (LFHOD), North Kuwait.Client : Petrofac/Kuwait Oil CompanyBrief Description: Quality inspection of all major activities of instrumentation system including calibration & installation of instruments/cables glanding & termination and loop checking based on standards KOC-I-0002 & KOC-I-0011.Telecommunication systems including installation of all communication equipments/ cables and OTDR testing of fiber optic cables based on standard KOC-T-0008.Roles & Responsibilities :• Working knowledge of client standards and supporting standards- API, ASTM, IEC, etc.•Preparation of Method statement, Inspection Test Plan and other necessary procedures based on client requirement. Ensures correct implementation of Inspection test plan (ITP).• Conduct field inspections on installation & testing of Cables, JBs, Instruments/valves, Impulse tubing, pneumatic tubing & loop checking as per inspection test plan & project specification.• Conduct field inspections for telecom – Fiber optic cable laying,splicing & OTDR testing.• Making red markup/as-built drawings for all changes during installation.• Able to read and work on P&ID drawing• Punch list preparation during field inspection & walkthrough and constant monitoring on punch closure.• Preparation of instrument loop folder packages for MC dossier.• Submitting inspection reports to lead engineer/manager on weekly basis. Show less

• 

  Integral Services Co. for Mechanical Contracting & Instrumentation W.L.L

  Apr 2019 - Mar 2024

  Instrumentation QC Inspector

  Project : KOC’s Water Management at GC-06, 08, 11, 19Client: Kuwait Oil CompanyROLES & RESPONSIBILITIES• Reviewing client standards, technical specification/requirements & engineering deliverables• Review of Instrument/Control system vendor and package vendor documents• Preparation of Inspection Test Plan (ITP), Quality control procedure (QCP), Method statement (MS) & Inspection & Test Records (ITR)• Coordination with Third party inspectors during FAT to ensure the compliance of client specification.• Inspection of incoming raw materials, review of Material Test Certificates (MTC) & preparation of materials and perform Material receiving inspection report (MRIR)• Inspection of incoming Instruments, Control systems, Instrument Packages, Instrument Cables, Junction boxes and tubes/fittings• Inspecting bench calibration of Instruments with compliance of IEC 17025 before installation• Conduct field inspections on installation of Pressure, Flow, Level & temperature Transmitters and Gauges• Conduct field inspections on laying & testing of Instrument cables• Conduct field inspections on installation of cable trays using NEMA• Conduct visual inspections on Installation of Control valves, Shutdown valves and Safety valves• Conduct field inspections on Impulse/pneumatic tubing and leak testing• Coordination with Client for witnessing stage inspection & final inspection activities• Loop checking and Functional check of Instruments• Conduct field inspections for telecom – Fiber optic cable laying, splicing & OTDR testing• Issuing NCR for activity at any stage of inspection which does not meet specification• Provide technical and engineering support to construction team.• Participation in the Mechanical completion -MC walk through.• Participation in the SAT & PAT.• Review checklist of Pre-Startup Safety Review (PSSR) walkthrough.• Punch list preparation, consolidation, monitoring & closure.• Construction red markup and As-built drawing preparation. Show less

• 

  Bureau Veritas Group

  Jun 2024 - Sept 2024

  Instrumentation Engineer

  Project : ADNOC's HSECES Identification, Categorization & ValidationClient : Abu Dhabi National Oil Company (ADNOC)Roles & Responsibilities :• Physical audit and site verification of Equipment & Instruments• Verification, updating & standardization of existing Equipment/Asset register• Preparation of new Equipment/Asset register• Preparation of red-line markup drawings to document deviations identified during site visits• Basic knowledge of CNG compressor package and its instruments• Reviewing/interpreting P&ID, Hazardous area classification drawing and SIL assessment report• Verifying SIF functions and achieved SIL rating from the SIL verification & validation reports• HSE Critical Equipment & Systems (HSECES) Validation, Identification & Categorization• Defining Performance Standards of HSE Critical Equipment & Systems (HSECES)• Conducting independent assessments of design plans, systems, and processes to ensure compliance with international standards and local regulations• Comprehensive review of design documents including diagrams, sketches, calculations, and specifications to identify potential design flaws and efficiency improvements• Providing systematic design reviews as per the requirements• Issuing certificates of compliance when design review is required due to specific regulations Show less

• 

  Larsen & Toubro

  Oct 2024 - now

  E&I QC Inspector

  Project : Marjan Field Development Program - CRPO-117,118 & 119 (Offshore)Client : Saudi AramcoSite : L&T Modular Fabrication Yard, Sohar Port, Oman• Reviewing client standards, scope of work, contract specifications, and quality procedures.• Well-versed in Saudi Aramco Engineering Standards (SAES-J series, SAES-P-104, SAES-P-111), Inspection Plans (SATIP series), and Inspection Checklists (SAIC forms).• Coordinating with PQCS during FAT and material receiving to ensure compliance with Saudi Aramco Material Specification Standards (SAMSS) and client requirements.• Inspecting incoming instrument cables, trays, junction boxes, instruments, control systems, instrument skids, and tubes/fittings.• Performing field inspections for cable tray installation as per NEMA VE2 standards.• Conducting field inspections of RTUs, ESD control panels, and marshalling boxes.• Inspecting the laying, testing, glanding, and termination of instrument cables.• Verifying bench calibration of instruments prior to installation.• Conducting field inspections for the installation of pressure, flow, level, and temperature transmitters and gauges.• Performing visual inspections of control valves, shutdown valves, and safety valves.• Inspecting impulse, pneumatic, and hydraulic tubing, including leak testing.• Performing loop checks and functional testing of instruments.• Raising INCRs for any inspection stage that does not meet applicable standards, procedures, or specifications. Show less