Muhammad Afaq

Experience

• 

  NSI Company, Pvt. Ltd

  Sept 2015 - Nov 2015

  Electrical and Mechanical supervisor

  Outline:Work on Manufacture and Designing Section of Power distribution panel, High Transformer (HT) & Low Transformer (LT) panel, Power Factor panel, Star Delta panel and Manufacture Transformers (11KVA).

• 

  MECHTECH Company, Pvt. Ltd, Lahore, Pakistan

  Jan 2018 - Jan 2020

  Heating Ventilation Air Conditioning Supervisor

  Outline:This company is provide HVAC services in huge scale. There are a lots of project which is installed new HVAC system, Air cooled system, Water cooled system, Compression Screw type chiller system, Cooling tower, Pumps, VRV & VRF system, FCU & AHU system, Absorption system.Key Responsibility:1- Operation and maintenance the Cross Flow and Counter Flow cooling Tower.2- Operation and Maintenance the Chilled water & Condenser water pump.3- Regular check any abnormal sound from pump bearing and replace the Bearing of pump.4- Regular Check Lubrication of all Valve like (Butterfly valve, Gate valve, NRV valve, Check valve, Ball valve and Diaphragm valve) which is used in HVAC system.5- Annual Maintenance of all HVAC like Descaling all Condenser section, Condenser Tubes, Evaporator section.6- Regular inspection of all AHU and FCU, Bag Filter, Mash Filter, Cooling coils, Drainage system, Drainage pump, Blower Motors.7- Troubleshoot all HVAC equipment like Cooling effect in room, Cooling tower Fan motor, Condenser pump & Chilled water pump bearing.8- Perform regular maintenance tasks such as inspecting, and replacingcomponents like filters, coils, fans, cooling tower, pumps, and ducts.9- Test and calibrate HVAC systems using specialized tools to ensure properairflow, temperature, humidity levels, and system performance.10- Diagnose and repair HVAC system, including electrical or mechanical problems, and replace faultyparts.11- Lubrication of all Valve like (Butterfly valve, Gate valve, NRV valve, Check valve, and Pressure reliefvalve) which is used in HVAC system.12- Adhere to safety protocols, industry regulations, and local building codes while working on HVACsystems.13- Maintain accurate documentation of service calls, repairs, installations, and maintenance activities. Weniger anzeigen

• 

  Suzuki motor company, Pvt. Ltd

  Jan 2018 - Apr 2018

  Manufacturing Supervisor

  Outline:Work on projects surrounding different type of CAR model Manufacture, work with very communication team who solve Trouble Shooting about any customer car problem and gain a little bit experience with After Sale Services team.Key Responsibilities:1- Participating in training sessions and workshops to gain practical knowledge of the automotive industry.2- Conducting research, data analysis, and market research to support decision-making processes.3- Collaborating with team members, attending team meetings, and contributing to group projects. Weniger anzeigen

• 

  Cool Point Company, Pvt. LTD

  Jan 2018 - Apr 2018

  Quality Control Specialist

  Outline: This Company Manufacture and Installation the Commercial AHU (Air Handling Unit), FCU (Fan Coil Unit), Package Air cooled system, Cooled Storage System, Commercial & Domestic Air Condition system and Refrigeration System.Key Responsibility:1- Check all material which is used to make for Condenser Coil, Evaporator Coil.2- Make all daily task in Excel format of all worker.3- Team work with senior engineer to help to make all Auto CAD drawing.4- Visual inspection of all Mechanical Machinery like Rolling Metal sheet machine, Metal Sheet cutting machine.5- Go with complain department person to understand any troubleshooting.6- Collaborating with cross-functional teams, including engineers, technicians,and product managers.7- Supporting the testing and quality control processes of HVAC systems and components.8- Assisting in troubleshooting and resolving technical issues related to HVAC systems.9- Participating in field visits or installations to gain practical knowledge and understand customer requirements. Weniger anzeigen

• 

  M.A Engineering Company, Pvt. Ltd, Lahore

  Apr 2018 - Jan 2018

  Heating Ventilation Air Conditioning Supervisor

  Outline:There are a lots of project in HVAC industry in huge scale. These company installation the Water cooled & Air cooled Compression system, Absorption system and BMS (Building Maintenance System). They are not only installation HVAC project but also do the MEP (Mechanical Electrical Plumbing) projects.Key Responsibility:1- Operation and Maintenance the Compression chiller system.2- Turn On the Compression Chiller, AHU, FCU and Cooling Tower from (BMS) system, Chilled water pump & Condenser pump.3- Daily inspection all VFD (Variable Frequency Drives Module), PLC (Program Logic Control Modules).4- CBM (Condition Based Maintenance) when any error showing on VFD & PLC system 5- Troubleshooting all HVAC equipment, AHU, Air cooled compression system which can reduce Error during operation.6- Perform routine maintenance tasks, such as cleaning condenser and evaporator coils, AHU, FCU, BMS (Building Management System) and VFD (Variable Frequency Drive).7- Regular Diagnose and troubleshoot problems in compression chiller systems8- They are identifying faulty electrical or mechanical components like, PLC (Program Logic Control Modules).9- Use specialized tools and equipment to measure and adjust system parameters, including temperature, pressure, and flow rates.10- Troubleshooting all HVAC equipment, AHU, Air cooled compression system which can reduce Error during operation. Weniger anzeigen

• 

  Orange Line Metro Rail Transit System (OLMRTS)

  Sept 2020 - Jan 2024

  E&M (Equipment & Maintenance) Supervisor

  Accountability:Overall Operation & maintenance of MEP systems assurance and integrity to meet the KPI compliance as agreed under the Service level agreement (SLA) of OLMRTS with PMA (Punjab Mass Transit Authority). Orange Line Metro Train work with JV (Joint Venture) with (NORINCO International), (GUANGZHOU Metro) & (DAEWOO Express).MEP Operation & Maintenance of Elevated & underground metro stations, Main power substations, and including Depot and stabling yard for E&M.Attainment: Responsible for Safety and Quality compliance and technical analysis of sub-department equipment.Directly responsible for Operation & Maintenance policies of the sub-department, in charge of production safety, technical quality, training management, and material management presides over the regular meeting of the sub-department, and organizes the promotion and implementation of the work plan of the sub-department.Communicate with employees, grasp the state of a team atmosphere, and formulate measures to ensure the stability of employees, Supervise the SOP implementation.Expertise in:1- Supervising & control the execution of O&M MEP equipment’s HVAC (Chillers, AHU, FCU, DX & CRAC units), Environmental Control Systems (ECS), DX Unit, Tunnel Ventilation System (TVS), OTE, UPE, SEF, SAF, and Drainage BMS, BAS, FAS, FES, BAS, SCADA, LV, Bus Duct, Inverter, UPS, Generators, Water supply, Escalator, Elevator, Platform Screen Doors.2- Fire Fighting (Active & Passive Fire Protection system), Fire Pumps, Jockey Pumps, and Water supply pumps. 3- Fire Protection Panels, Wet & Pre-action Systems (Fire Alarm & Fire Aspiration system.4- Vertical Transportation Systems (Escalators & Elevators), Travellators, Automatic Sliding Doors (PSD Full height and Semi height).5- Cooling Towers, Chillers, CRAC & DX UNITS, Chilled Water system, and Cooling Water systems.Skills: Railway Systems · BAS, SCADA · Mechanical, Electrical, and Plumbing (MEP) · Fire Safety · Analytical Skills. Weniger anzeigen

• 

  MEPd2o

  Jul 2021 - Jan 2022

  Revit MEP Trainee Design Engineer
• 

  Google

  Nov 2022 - Feb 2023

  Google Data Analytics

  I have a complete my Google Data Analytics certificate course online in coursera website. During this course i have gain a lots of skill like Advance Excel, SQL (Structured Query Language), Dashboards, Reports, Pivot Table, Tableau and R programming language and Python programming language.