Experience

• 

  Maxwell construction & contracting

  Aug 2010 - Dec 2010

  Design engineer trainee

  Preparation of all Electrical Engineering & Construction drawings using AutoCAD. Calculation of total load current and selection of the cable size and making load schedule. Internal lightings inside control building, plant interface buildings and security room. External lightings, street lights, security fencing lights. Quantity Take Off and verification as per BOQ for Variation Orders.

• 

  Seokwang development co., ltd.

  Feb 2011 - Jan 2014

  E&i qa/qc inspector

  Project2: Ma'aden Rolling Mill PROJECT (Jan2012‐Dec2013)Designation : Electrical QA/QC InspectorClient : Polysilicon Technology CompanyMain Contractor: Hyundai & KCC (JV)Project1: EXPANSION OF MARAFIQ PLANT (Feb2011‐Jan2012)Designation : Electrical EngineerClient : MARAFIQMain Contractor: Jacobs Engineering Group Monitoring and ensuring that all electrical engineering aspects of the project are carried out as per inspection plan/drawings/codes and specifications. Ensure compliance of electrical works to design requirements, specifications and project plan. Assure all electrical system meets international quality requirements of NEC, NEMA VE2, IEEE and BS Wiring regulations. Conducted material receiving inspections & monitored materials storage & preservation as per the requirements Carried out the inspection of the installation and testing of various works completed and submitted the Inspection & Test Request to client inspection & testing of various works Initiate, manage and if required supervise electrical engineering project requirements, provide assistance and advice during procurement, construction and commissioning activities. Coordinating with all disciplines & provide work direction to ensure no conflicts occur. Provides technical direction to construction teams in a wide range of construction engineering and design functions. Identifying near miss and nonconformities in materials, processes, procedures and reporting the near miss / nonconformities in the near miss / nonconformity report. Verify corrective and preventive actions within target dates and disposition of NCRs; prepared project completion & handover documents including QVDs and other related documentation works Ensure all quality control documentation is compiled for as-built hand over through the QC manager. Show less

• 

  Diplomat group wll

  Jan 2014 - Nov 2019

  Electrical qa/qc engineer / qatar energy

  Project: EPIC of QP New NGL Support CampusClient: Qatar Petroleum• Reviewing drawings & submittals of all E&I works and materials; preparing quality related documents such as ITP, Method of statement and related work instructions as per project scope of work & ensuring liaison with the client for approvals• Performing material receipt inspections and verification of vendor documentation against the QP & QCS requirements• Monitoring & ensuring all E&I installation works & materials at site (including Conduiting, Cabling/Wiring, Earthing & Lightning Protection, Cathodic Protection system, Lighting & Power system, Switchgear, Motor Control Centers, Distribution Boards, Transformer, Generator, Motors/pumps, UPS & Battery, Telecom system, F&G system, Security & Access Control system, BMS & Scada system) are as per standard & project specifications• Engaged in inspection & functional testing of telecom cabinet, communication and data systems, PAGA, CCTV, LAN, Video conferencing, Radio system, SMATV, Smart board, Cameras, barriers and security & access control system• Taking preventive and corrective actions for the non-conformities observed at the site; making sure all NCRs are addressed and closed within the target dates• Witness Factory Acceptance Test in accordance with the approved procedure and project specification.• Conducting weekly meetings for subcontractors to analyze & control quality issues; coordinating with client to provide solutions for technical deviations and to ensure that all standard requirements are met• Engaged in the punch-listing of the completed construction activities (Punch-List -A&B) & ensuring closing of the punch items by the project team before Mechanical Completion • Ensuring the preparation and the filing of records of the electrical dossiers for final handover to the client Show less

• 

  Larsen & toubro

  Feb 2020 - Feb 2021

  Electrical qc supervisor/saudi aramco

  Accountable for planning, establishing, updating and implementing quality inspection plans in compliance with SA Inspection Plan, Engineering Standards and Procedures. Manage & support Site Inspectors for effective implementation of approved project quality plan, Method statements, ITPs and checklists. Preparation of monthly quality reports, maintaining project quality index, ensuring all deliverable submission as per Schedule-Q requirements, issuance and closure of INCR/Logbook entries. Preparation of energization package and other special process procedures listed in Schedule Q and ensure timely submission of all deliverables for approval by the client SAPID. Preparation of two week look-ahead inspection plan and assigning QC inspectors to various activities based of construction activities in progress Reviewing IFC drawings & submittals of all activities and materials for technical acceptance. Handling necessary inspections as identified in the approved Inspection and Test Plan (SATIP) to establish if the client requirements are being achieved. Reporting to QA/QC manager. Consistently collaborates with construction/project manager and project team. Proactively manages potential problems, work interferences, and schedule conflicts/setbacks. Periodically auditing and reviewing all the documentation and control is being enforced as per project quality plan. Regularly conducting focus assessment of QC inspectors activities to ensure all inspections are being performed as required by the SATIP and ensure all findings are properly logged, reported and solved by inspectors. Participating in the management review meetings and communicate the recommendations to inspection team, on the effectiveness of the developed quality system. Communicate the customer requirements, Quality objectives & PQP to all concerned. Show less

• 

  Imad company for contracting

  Jan 2021 - Nov 2022

  Electrical qc inspector/saudi aramco

  Perform inspection and witness the testing of various materials and equipment at site to verify compliance with company standards as per the Saudi Aramco typical inspection plan.Perform material receiving inspection of LV/MV cables, switchgear, switchrack, MCC panels, transformers, panelboards, mechanical-skids and other electrical equipment in accordance with respective SAMSS and SATIPConduct the internal inspections of whole electrical activities (Cable trench, cable trays, conduits, cable laying, grounding, panelboard, switchgear, switchrack, skid equipment, motors, UPS, heat tracing system etc.) from the installation through precommissioning until final energization as per the apllicable SAES and SATIP.Ensure good workmanship is observed at all times and construction actvities are in full compliance to the SA standard and project requirements and relevant sections of NFPA-70 code/NEC standard.Carry out surveillance inspections and drawings/document review to proactively notify the construction and engineering team and taking preventive actions against probable non-conformances based on the lessons learned.Issuing iNCRs for the noted non-conformances related to construction activities, materials, IFC drawings and tracking until the verification of the corrective action within agreed completion date.Prepare regular inspection and surveillance reports, log iNCRs in EPM system implemented by Saudi Aramco.Provide quality tool box sessions to the construction team prior to start of any electrical activity and periodically thereafter as required by Schedule Q.Steered the implementation of quality initiatives such as design reviews and preventive actions that instilled basic quality philosophies of doing things right the first time, resulting in the reduction in company rework costPerform focused assessments of specific work elements to ensure that the quality activities and processes are effective. Show less

• 

  Sinopec fifth construction co. ltd

  Dec 2022 - now

  Lead electrical qa/qc engineer/ saudi aramco

  Monitoring all installation and inspection of Electrical activities- including the installation of 230kV GIS switchgear bays (expansion) and associated Relay and Control panels and cabling works in the Substation with respective of Saudi Aramco/Contractor ITP and standard requirements. Verifying that all necessary inspections and tests, as required of the project and statutory regulations, are carried out and appropriate records are updated and maintained. Witness and record all the testing of 230kV GIS switchgear bays together with ABB pre-commissioning team. Performing assigned in-process inspection and testing for the shutdown activities for installation/upgradation of the existing relay panels, CT units and other accessories in Substation. Preparing inspection & test reports of completed inspections & tests and compile for the energization package. To follow proper inspection techniques and examine workmanship and materials, to detect deviations from codes, specifications and approved construction and maintenance practices and ensure construction activities are in full compliance to the SA standard and project requirements and relevant sections of NFPA-70 code/NEC standard. Conduct surveillance inspections and drawings/document review to proactively notify the construction and engineering team and taking preventive actions against probable non-conformances based on the lessons learned. Monitoring and implementation of QMS Procedures, PQP, ITP & method statements and reporting deviations from management system / contractual requirements of the projects. Verification of implementation of corrective & preventive actions against the nonconformities and reporting results to QA/QC Supervisor and line managers, if necessary. Show less