Engr. Wasiu Oseni (R. Engr. MSc, MNSE)

Experience

• 

  Abia State Ministry of Science and Technology(NYSC)

  Mar 2009 - Feb 2010

  Scientific Officer

  Spearheaded seminars and workshops related to biotechnology and food production.Liaised with local investors to harness opportunities for technological advancement.Collaborated with the head of biotechnology department to establish monthly bulletins on latest development as regards biotechnology.Researched on the application of biotechnology to improve food production.

• 

  International Energy Services Limited-Chevron/HHI/IESL-DSO Offshore Project

  May 2012 - Nov 2012

  Trainee Process Engineer

  Generated line sizing calculation notes for liquid and vapour lines for 1st stage suction scrubber.Prepared process line lists as well as review of equipment data sheet for slug catcher.Implemented process review comments on process deliverables.Reviewed P&IDs for 1st, 2nd & 3rd stage suction scrubbers train 1.ProjectsChevron’s Meren Gas Gathering and Compression Project. Associated Gas was gathered from different offshore production platforms. The gathered gas was then routed to a new offshore Gas Gathering and Compression Platform, and compressed to pressure sufficient to deliver the gas to onshore facilities, via a subsea tie-in on an existing platform to the shore. The gas gathering and compression platform was then bridge-connected to another production facility Show less

• 

  Chibek Instruments Limited

  Jun 2018 - Jun 2019

  Technical Support Engineer

  Planned and executed the installation of analytical equipment such as Gas Chromatographs, UV-VIS Spectrophotometer, Atomic Absorption Spectrometer, used in the laboratory for the analysis of hydrocarbon components in oil and gas samplesAssisted and prepared reagents, methods and procedures based on approved standards and conducted samples analysis to test the performance of the equipment as well as to validate the results obtainedUndertook all activities, including, visitation to client site, detailed design, material and equipment specifications and costing to set up standard industrial chemical laboratoryOrganized and carryout installation of application software such as Shimadzu lab solution, UV probe, to allow users to set unit of measurements, select measurement standards, choose analysis method, adjust component peaks and other functionalities of the equipmentProjects1. Procurement of Analytical Equipment Project. An NNPC (WRPC/PHRC) project which involves procurement, installation, calibration and testing of gas chromatography for the determination of concentrations of parrafins, naphthenes and aromatics in crude oil and natural gas samples Show less

• 

  SATCO Consultancy and Energy Services Limited

  Aug 2019 - Jul 2021

  Process Engineer

  Performed process simulation and generated Process Flow Diagrams, and heat and material balance for the streams and drafted Piping and Instrumentation Diagrams as well as Process Flow Diagrams using AUTOCAD for the entire facility Determined the adequacy of the existing pressure safety valves based on the scope of work of Oben gas metering station project and recommended new designs where necessary considering backpressure, relief pressure and temperature, critical pressure, 3% inlet piping rule and Mach number criteria for outlet piping, based on API STD 520, 521 and 526.Designed new blowdown valves for Oben gas metering station and carried out blowdown studies including hot and cold depressuring based on the volume of inventory locked down by the shutdown systems at various locations in the plant.Carried out Process design such as flare system analysis, line sizing, equipment sizing, PSV sizing, centrifugal pump design, control valve sizing and develop schemes for the overall process control of Oben Gas metering station.Produced operating philosophy, isolation and maintenance philosophies for filter separator, pig receiver/launcher, and emergency shutdown and depressurization philosophies for Oben gas plant.Participated in project, HAZOP, and constructability reviews for Oben gas plant rehabilitation project.Projects1. Rehabilitation/Upgrade of Oben Gas Metering Station. An NGC/NNPC Detailed Engineering Design project to increase the plant capacity from 450mmscfd to 1000mmscfd with the view of development of gas infrastructures and growing demand of gas in Nigeria. 2. NEDO Gas Plant OMBUDSMAN Consultancy Services for Energia/NEDO Gas Limited Show less

• 

  Kilo Global Integrated Services Ltd

  Jul 2021 - Dec 2022

  Process Engineer

  Provide all Process Engineering documentations and software simulations (Aspen HYSYS, PRO II, PIPENET,etc) including all engineering drawing, AutoCAD, and all other documents required by prospective clientsAssist the Project Manager to prepare, schedule, coordinate and monitor the assigned engineering project and perform on the job risk assessmentDesign, run, test and upgrade oil and gas production facilities and ensure the compliance with applicable codes and standards, managing cost, maximizing profit and time constraints.Produce operating philosophy, isolation, and maintenance philosophy and assist in technical and commercial tendersAchievement:Developed Process Flow Diagrams as well as Piping and Instrumentation Diagrams for Wellhead manifold assembly as well as flow flexibility assemblyPerformed process simulation for OREDO S flowstation, generated Heat and Material Balance which served as input for line sizing, choke valve design and other process calculations for the facilitySupervised pipeline and piping fabrication, valve, and other fittings installations for 100,00 barrels crude oil buffer tank at OML 20, firewater tank, and firewater and foam Ringmains according to isometric drawings and suggested aesthetically easy to construct and operate piping arrangement with minimal pressure dropSite assessment visit to OREDO S flowstation and developed detailed As-Built P&IDs for Wellhead hookup assembly, manifold assembly, and flow flexibility assembly.Projects1. Detailed Engineering Design, Procurement, Construction, Installation and Commissioning of a 100,000 barrel capacity crude oil buffer storage tank for Egbema and Ugada Oil Fields in OML 20 for NPDC2. Construction of Oredo S flowlines in OML 111 for NPDC3. Installation of Western Asset Export Pumps and Relocation of Existing Pumps for SEPALT Show less

• 

  Nigeria LNG Limited Seconded by International Energy Services Limited

  Jan 2023 - Aug 2023

  Asset Monitoring Center Specialist (Process Control, Mechanical, Instrumentation/Valves) Trains 1-6

  ● Manning and managing the Asset Monitoring Center facility onsite in order to secure the health and reliability of assets in the production unit (Trains 1-6) and also for effective Instrumentation Asset Management System(IAMS)● Responsible for surveillance services for compressors, pumps, columns, and other equipment in NLNG facilities using predictive and condition monitoring tools, such as AVEVA Prism, AVEVA Pi Vision, Shell PTM Hub, Schneider Maintenance Response Center, Shell AiC3 for Control Valves, etc● Evaluating the credibility of various fault alerts received for equipment and instrumentations in the Acid remover, mercury removal, liquefaction as well as fractionation units, then raise defect job requests for quick maintenance intervention● Prevented process safety issues, train and equipment trips and saved over $2m YTD through proactive technical monitoring of process parameters and equipment conditions. Show less

• 

  Kilo Global Integrated Services Ltd

  Sept 2023 - now

  Process Engineer