Experience

• 

  Invensys - acquired by schneider electric

  Nov 2014 - Sept 2017

  Engineer

  • Review SPI database & preparation of database validation report.• Interaction with EPC to resolve database related technical queries• Participated in BOM finalization for expansion project.• Preparing marshalling cabinet layout for field cable allocation.• Allocation of hard wired I/O tags to I/O modules as per I/O segregation rules.• Preparation of hardware specific design documents like.• Field Cable and I/O channel assignment document.• System Cable assignment document.• Control Processor sizing document.• Preparation of cabinet design layout as per hardware allocation for.• DCS& ESD System cabinet• DCS & ESD Marshaling cabinet• Switch and Work Station cabinet• Power distribution & IRP cabinets• Preparation of DCS & ESD system as per proposed architecture.• Conducted DCS & ESD system test.• Generation of Bulk engineering database.• Developed custom templates for configuring logic.• Conducted internal testing of all Hardwired I/O’s.• Implementation of simple loops in DCS & tested it during commissioning. • Executed the modification packages (hardware as well as system logic) with minimal impact on existing configuration. • Generated both hardware and software return database • Generation of As-Built documents based on FAT. • Selection of loop typical as required for application & generation of Loop typical diagrams using SPI. • Involved in PSSR activities and PIB power on. • Key member in IFAT for DCS & ESD Networks. • Established Serial Link communication by using MODBUS, Ethernet TCP/IP protocols. • Foundation Fieldbus device commissioning and testing. • Involved & carried out different SAT procedures for DCS, ESD system, Network Architecture, FF loops, Cabinets etc. • Familiar with procedure & software (DTM’s) used for Asset Management using HART & FF devices. • Implementation of Partial Stroke Test for Fisher DVC valve using Valvelink DTM. Show less

• 

  Honeywell automation india ltd

  Sept 2017 - Jun 2021

  System engineer

  • Review of database & validate it.• Interaction with EPC to resolve database related technical queries• Preparation of hardware specific design documents like. Typical Loop Schematic,Hardware/Software FDS for DCS, PLC, RTU, ESD, FDS for Third-party Devices.• System Architecture Design• Heat & Power Calculation• Preparation of cabinet design layout as per hardware allocation for. DCS,ESD & RTU system.• Preparation of RTU & ESD system as per proposed architecture.• System Setup as per approved system architecture.• Field Device Manager Configuration for EPKS system • Historian Configuration and testing.• Conduct System test. (FAT, SAT & IFAT)• Generation of Bulk engineering database.• Developed custom templates for configuring logic.• Conducted internal testing of all Hardwired I/O’s.• Established Serial Link communication by using MODBUS, OPC UA & DNP3 protocol. • Logic Development in ControlEdge Builder, Triconex as per Control Narrative• Preparation of FAT Test Procedure.• Performed FAT with EPC & End user.• Providing solutions for Site Modifications• Providing Technical solutions as per Customer queries related to Modular System.• Testing & Validation of provided solution on virtual platform • Interaction with Development team for specific requirement from customer• Maintaining Documentation related to queries.• Vendor & Customer interactions for GTAC.• Knowledge Article Contributor• Team Management Show less

• 

  Siemens technology india

  Jun 2021 - Dec 2023

  Software test engineer
• 

  Emerson

  Dec 2023 - now

  Assistant project manager

  Responsible for Project Delivery and Execution for Emerson India. Team Coordination, Sales Support.