Ramesh Natarajan

Experience

• 

  Majestic Rubbers

  Jun 2006 - Mar 2007

  Electrical Maintenance Engineer

  Electrical Engineer for PMS and Maintenance Issues

• 

  Tanker Pacific Management

  Mar 2008 - Jun 2011

  E & I Inspector/Electrical Engineer

  E & I Inspector as per IEC 60079 Atex,Aus/Nz Standards for Projects FPSO Montara Venture and FPSO RaroaHighlights:Detailed Inspection of ELECTRICAL EQUIPMENTS IN HAZARDOUS AREA, EEHA (EXPLOSION PROOF EQUIPMENTS) Exd, Exe, Exia, Exib, Exm, Exn equipments according to IEC/Australian Standards. AS/NZS - Australian & New Zealand (e.g. 2340, 2381, 60079 and 61241) IEC - International Standards (e.g. 60079, 61241, 61779, 62013 and 62086) NEC 500 and NEC 505 ATEX - European Standards.• Inspection of Electrical Equipments Installation for Atmospheric Explosion Proof for Turret. Upper deck and Modules.• Inspection of Smoke. Detectors, Heat Detectors, Gas Detectors & Manual Call Points.• Inspection of lighting circuits.• To Check IEC, ATEX and Australian Standards compliance after inspection is carried out.• To check Cable Termination and Mechanical Completion is as per IEC/Australian Standards.• Done equipotential bonding and carried out testing of the same.• Review and Maintenance of EEHA Dossier.• Monitor and sign for Electrical completion of ITR and raising punch list.• Performing Entity Calculation for Intrinsically Safe Circuits • Clearing punch list for any Electrical Equipment in Hazardous Area Implement any corrective action arising.• Rectification action plan for generated Punch List & NCR. • Carried out insulation test for various electrical machineries, equipments, cables.• Review technical drawings and support with Engineering for the technical issues.• Followed Australian & New Zealand (2340, 2381, 60079 & 61241) IEC - International Standards (60079, 61241, 61779, 62013 & 62086) NEC 500 and NEC 505 ATEX - European Standards• Checked:o IEC, ATEX and Australian Standards compliance post inspection o Cable termination and mechanical completion as per IEC/Australian Standards• Undertook equipotential bonding and carried out testing of the same• Reviewed and maintained EEHA Dossier Show less

• 

  Bureau Veritas

  Jun 2011 - Apr 2013

  E&I Inspector

  E & I Inspector in various manufacturing industries as per IEC standards and norms.Highlightso EEHA Inspection of Transmitters in M/s Yokogawa,Bangaloreo EEHA Inspection of Motors in M/s ABB ,Bangaloreo Inspection of PLC/SCADA Panels in M/s ABB,Bangalore for M/s Protec, QATARo Transformers of Various KVA Rating at Kirloskar, Mysore, Sudhir Intra Vidyut, Pvt. Ltd.o Motors of Various KW Rating at ABB Bangaloreo VVVF Drives Panels at ABB Bangaloreo Transmitters like pressure, temperature and level at Yokogawa India Pvt. Ltd.o Anti fog zinc insulators at BHEL EPD, Bangaloreo VRLA Batteries at Exide Industries, Hosuro Intelligent Integrated Power Management at Lineage Power Pvt. Ltd. for Bharti Infratelo CCTV at HPCL Mangaloreo Wave Traps at Areva ,Indiao Electrical equipments as per latest IEC & IS standards and as per Clients Requiremento Prepare ITR and Checklist for EEHA Inspection Activitieso Review the punchlist in ITR are cleared as per relevant standards• Reported observations and problems which were pending• Reviewed documents such as Internal Test Report, Manufacturer’s Bought out Items, Type Test Report, IP Test Certificate and Atex Certificates.Project Handled:Dubai International Airport Expansion (Phase II)Period:Oct’11 to May’12Highlights:• Adeptly witnessed SAT for:o 2000 KVA, 1600 KVA & 1000 KVA Dry type Transformers o 12 KV Ring Main Unit of ABB and Schneider makeo Main Distribution Board of Siemens Makeo LV Switch Gears like Air Circuit Breakers & MCCB’s of Siemens Makeo Current Transformers used for metering and protectiono PLC based auto-change over logic for the main distribution board in case of one transformer failure with a provision for local and auto control o Variable Frequency Driveso Electric Switch Boards and Electric Motor Control Centre• Inspected the availability of momentary coupling for both incomer feeders by means of a Synchro relay and a keyed manual control selector switch Show less

• 

  Omni Offshore Terminals Pte Ltd

  Apr 2013 - Mar 2014

  EEHA /E and I Inspector/Electrical Engineer

  Electrical Engineer for NR 10 Brazilian Compliance and EEHA Inspection as per IEC 60079/Atex standardsDetailed Inspection of ELECTRICAL EQUIPMENTS IN HAZARDOUS AREA, EEHA (EXPLOSION PROOF EQUIPMENTS) Exd, Exe, Exia, Exib, Exm, Exn equipments as per IEC 60079 Standards. • Inspection of Smoke. Detectors, Heat Detectors, Gas Detectors & Manual Call Points.• Inspection of lighting circuits.• To Check IEC, ATEX and Australian Standards compliance after inspection is carried out.• To check Cable Termination and Mechanical Completion is as per IEC/Australian Standards.• Done equipotential bonding and carried out testing of the same.• Review and Maintenance of EEHA Dossier.• Monitor and sign for Electrical completion of ITR and raising punch list.• Performing Entity Calculation for Intrinsically Safe Circuits • Clearing punch list for any Electrical Equipment in Hazardous Area Implement any corrective action arising.• Show less

• 

  Nexus Global Business Solutions, Inc.

  Apr 2014 - Nov 2014

  EEHA INSPECTOR

  Detailed Inspection of ELECTRICAL EQUIPMENTS IN HAZARDOUS AREA, EEHA (EXPLOSION PROOF EQUIPMENTS) Exd, Exe, Exia, Exib, Exm, Exn equipments as per IEC 60079 Standards. • Inspection of Smoke. Detectors, Heat Detectors, Gas Detectors & Manual Call Points.• Inspection of lighting circuits.• To Check IEC, ATEX and Australian Standards compliance after inspection is carried out.• To check Cable Termination and Mechanical Completion is as per IEC/Australian Standards.• Done equipotential bonding and carried out testing of the same.• Review and Maintenance of EEHA Dossier.• Monitor and sign for Electrical completion of ITR and raising punch list.• Performing Entity Calculation for Intrinsically Safe Circuits • Clearing punch list for any Electrical Equipment in Hazardous Area Implement any corrective action arising.• Certified IEC 600079/Atex and Australian Standards compliance after inspection was carried out• Involved in Construction Inspection and Commissioning activities• Reviewed technical drawings and supported with Engineering for the technical issues• Performed entity calculation for intrinsically safe circuits • Cleared punch list for any electrical equipment in hazardous area Show less

• 

  Seacorr Industrial inspection services

  Dec 2014 - May 2015

  Senior EEHA Inspector/E & I Inspector

  Key Responsibilities:Detailed Inspection of ELECTRICAL EQUIPMENTS IN HAZARDOUS AREA, EEHA (EXPLOSION PROOF EQUIPMENTS) Exd, Exe, Exia, Exib, Exm, Exn equipments as per IEC 60079 Standards. • EEHA Inspection of E and I Equipment Installation for Atmospheric Explosion Proof as per IEC 60079 standards.• EEHA Inspection of lighting circuits.• Review the EEHA inspection certificates, Manufacturers document and certification for Hazardous area compliance as well as IEC Standards.• To Check IEC 60079Standards compliance after inspection is carried out.• To check Cable Termination and Mechanical Completion is as per IEC Standards.• Review of EEHA Dossier.• Monitor and sign for Electrical completion of ITR and raising punch list.• Performing Entity Calculation for Intrinsically Safe Circuits.• Inspection of Cable Trays and Cables on behalf of Client.• Reviewed technical drawings and supported with Engineering for the technical issues Show less

• 

  Gharshub Control System

  Nov 2015 - Jul 2020

  E & I Inspection Engineer/Project Engineer

  Project: Bab Integrated Facilities 45 No of Power Skids, Haliba Development Project Phase I(20 Skids),Client: SIEMENS/LTHE ,Period: September 2018 to Present,Designation:E & I Project EngineerProject:Perro Negro 7,Client: SAIPEM Period: May 2018 to September 2018Designation: E & I Inspection Engineer on Behalf of Dubai DrydocksProject: AL DAABIYA SURFACE FACILITIES PHASE IIIClient: TECNIMONT Period: JANUARY 2018 TO MARCH 2018Designation: E & I Inspection Engineer Project: 25 Power Supply Skids for Mender Development Phase-I for ADCOClient: TOZZI SUD S.P.APeriod: November 2016 to January 2018,Designation: E & I Project Engineer/E & I Inspection EngineerProject: UPPER ZAKUM 750 SURFACE FACILITIES PROJECT,Client:On Behalf of Specialist Services for Petrofac/ZADCO,Period:January 2016 to September 2016,Designation: QA/QC E & I Inspection Engineer Show less

• 

  Ali & Sons Marine Engineering Factory (ASMEF)

  Aug 2020 - Jul 2021

  E&I Engineer

  E and I Project Engineer for two projects 12 No of Power Skids for ADNOC BUHASA project and E and I works for 16 Modules PAR for IGD II Expansion Project

• 

  Thorlux Lighting

  Feb 2022 - Sept 2023

  Lighting Project Engineer

  Major Clients: TFL Railway Depot (Ruislip, Hainault and Upminster Railway Depots)Key Projects Worked on• Renovation of all Old Luminaires to LED Luminaires in TFL Railway Depots such as Ruislip, Hainault and Upminster. Key design Engineer along with Liaising with TFL Project Management team.• Produce a Bill Of Material of all the Luminaires for the final approval of the TFL Consultant team.• Design the Luminaires in Dialux Evo 4.13 for all the Railway Shed such as Maintenance Shed, Cleaning Shed and Other External Buildings.• Making sure Design and Luminaires meet the TFL Engineering Standard for all the Railway Depot projects worked on.• Emergency Luminaire calculation for both battery operated luminaires and UPS Powered Luminaires as per TFL Project specifications and standards.• Presenting the design and getting approval for the same.• Design of Luminaires for the Projects in DIalux EVO, DIALUX 4.13 software and provide the output in CAD• Emergency Luminaire Designing and Calculation as per the British Standards , project requirement• Usage and application of different types of calculation surfaces - escape route, anti-panicsurface, UGR calculation area, daylight factor calculation surface etc Show less

• 

  ASN

  Sept 2023 - now

  Shore End Project Engineer