Mohammed Zaid Shaikh

Experience

• 

  Ashida Electronics

  Jun 2009 - Nov 2009

  Junior Relay Testing Engineer

  Responsibilities• Inward quality control i.e. checking of different components (defective)• Testing of digital & analog relay, High voltage testing i.e. checking the device withstanding capacity• Testing & Calibrations of instruments Like Multi meter, timer, Relay testing machines, Transformers etc.

• 

  Crompton Greaves

  Dec 2010 - Jun 2014

  Post: Testing Engineer and traction supervisor Employment Type: Permanent (Part time)Responsibilities• Meeting with workers and assigning task individually and provide solutions immediately • Discussing the matter and problems during the work with higher authorities• Testing Of converter In front of Inspector coming from CLW• Servicing of defected converter returned from the site and communicating with concerned persons• Data entry of the tested converter, Identifying Faults and Debugging, Wave-form interpretation Show less Post : Junior testing engineer (auxiliary and power converter used in railways)Responsibilities: Continuity testing of both converter i.e. auxiliary and power converter. High voltage testing i.e. checking withstanding capacity of component and cables. Whole converter testing. Identifying the waveforms at different juncture and checking it within specified limit. Converter testing,  Data entry of the tested converter. Final testing of converter in front of inspector coming from CLW. Show less

  • Traction testing Engineer

    May 2011 - Jun 2014

  • Testing Engineer

    Dec 2010 - May 2011
• 

  Securens Systems Pvt. Ltd.

  Jun 2014 - Nov 2014

  Security System Engineer (CCTV & Access Control Engineer)

  Responsibilities• Installation of CCTV cameras and servicing if there is any problem in monitoring like No video, Fluctuation in Picture quality, Adjustment in the quality of video according to surroundings, Digital video recording issue etc• Installation of different CCTV Cameras like IP camera, Dome camera, Bullet camera, Military surveillance IR camera etc• Installation and configuring of different Door access control systems for security• Up gradation of the software version with the latest version• Installation & servicing of different sensors like Glass break sensor, Removal sensor, Thermal sensor, PIR sensor etc• If the system is down and problem in monitoring, providing the solution by making the site up using different methods• Configuring different routers (Net access, Techno routes, D-LINK) Both CDMA & GSM used in the system, Installation & servicing of smoke detectors.• Installation of different kinds of antennas for network coverage like Yagi antenna both CDMA & GSM, packed & Spark antenna after testing the best network supported on that particular site.• Attending down calls i.e. if the system is down, visiting on the sites and up the system.• Providing the back up of the CCTV footage in case of any problematic situation e.g. Loss of customer’s money or there happened any robbery in the bank.• Installation & servicing of different DVR's (4channel,8channel,12channel,16 channel) • Providing demos to the clients about the working of CCTV & Access control systems.• Identification of the Faults came in CCTV like no video, fade in picture quality and debugging it on the site independently.• Servicing of the PMS control system & Arm/Disarm keypad (Which is used while leaving the bank)• Submitting the daily report to territory manager about daily work and reporting for any shortage of material on site• Providing the power point presentation of each site to ensure quality of work done. Show less

• 

  Total FMS

  Dec 2014 - Jan 2017

  Facility management co ordinator

  Responsibilities • Project Planning • Site Inspection/Surveying • Asset capturing & Tagging • Conditional Surveying of all electrical equipments • Coordinating & reporting to operation manager Live Projects• Towaisa (Al Ain) Military camp• Liwa Military Air base• Al Ain Military college • Zayed Military Camp (ZMC)Skills under test• MS Office• Excel• Power point• Auto Cad• Revit (Electrical)

• 

  Super Touch Services LLC

  Feb 2017 - Jun 2018

  Project Coordinator

  • Project Planning - Preparation of RFQ’s (Quotation) & RFP’s (Proposal)• Site Inspection/Surveying - Contacting subcontractors & ask for their Quotations • Asset capturing & Tagging - Provide training for newcomers in company• Conditional Survey of all electrical equipment’s - Handling BMS & Security system• Coordinating & reporting to operation manager - Fixing meeting with clients & continuously updating staff• Installation of cctv cameras & access control - Installation of home automation systems• Quantity surveying on site as well as from AutoCAD drawings • Keeping a record of number of faults and types of faults came in FACP (fire alarm control panel)• Preparing Quotation (BOQ) & cost estimation - Issuing LPO & submitting invoices of Job completed• Handling the complaints by communicating with the technicians and engineers in a timely manner • Keeping a track record of job orders and follow them until completion• Updating all the lists- employee, complaints, job tracker, and attendance. Stock control, petty cash,etc. Show less

• 

  Al Shadeed Electromechanical Co LLC

  Jun 2018 - Jan 2020

  Facilities Engineer

  Responsibilities • Project Planning (Annual Maintenance , Adhoc Maintenance)• Complete tasks on time and within budget resulting in strengthening Management to Tenant relationships.• Create and maintenance of Preventive Maintenance Schedule to perform regular checkups so as to avoid breakdown and disrepair.• Maintenance and repairing of all Plumbing and Electrical fixtures ensuring they were in working order at all times.• Installation and repairing of all Doors, Hardware, Acoustical Ceilings, Flooring and Tenant Improvements enabling the Property Manager more time to address other property issues.• Research, develop and implementation of conversion of all exterior lighting from high cost Metal Halide or Mercury vapor lamps to CFL resulting in a 65% savings in electrical costs still allowing the same Lumens.• Converted all interior fluorescent and incandescent fixtures, resulting in a substantial rebate from the state being paid to the property. • Preparation of RFQ’s (Quotation) & RFP’s (Proposal)• Site Inspection/Surveying • Conducting periodic preventative maintenance inspections in each assigned building and performed required equipment maintenance• Responding to daily service calls requested from tenants; to immediately correct problems or reported for further action• Performed minor plumbing and electrical repairs• Served as duty engineer in accordance with published duty schedules• Participated in calls and responded to afterhours problems and emergencies; and was required to return to duty within a specific recall time• Reporting directly to the Operational Manager• Planning and undertaking scheduled maintenance• Responding to breakdowns• Diagnosing faults• Repairing equipment• Supervising engineering and technical staff• Obtaining specialist components, fixtures or fittings• Maintaining statistical and financial records• Ensuring compliance with health and safety legislation• Managing stocks of supplies and equipment. Show less

• 

  Abu Dhabi Country Club

  Mar 2021 - Aug 2022

  Maintenance Supervisor

  Maintenance Supervisor• Inspect sites regularly to identify problems, priorities the urgent works and do necessary maintenance.• Prepare weekly maintenance schedules and allocate work as per forecasted workloads.• Coordinate daily maintenance activities.• Oversee all repairs and ensure that work is completed on time.• Maintain all inventory and equipment, and ensure proper storage.• Comply with all health and safety regulations and practices on site.• Conduct preventative maintenance work.• Conduct follow-ups on all maintenance and repair work.• Establish strategies to meet workload demands on time.• Submission of daily maintenance work executed at site with photographs.• Daily entry of the work executed at site by techniciansElectrical Technician• Routinely inspecting electrical systems such as wiring, fixtures, and appliances.• Identifying faults or hazards.• Troubleshooting system failures.• Reviewing blueprints to understand wiring placement.• Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.• Conducting maintenance repairs on old or faulty fixtures.• Responding to fault requests.• Providing suggestions for equipment replacement.• Writing electrical maintenance reports.• Repair and replace parts on machines and systems including motors, motor starters, relays, timers, fuses, breakers, push-buttons, emergency lighting, conduit formations, circuitry, and control panels. Show less

• 

  Ejadah

  Aug 2022 - now

  MEP Team Leader

  Responsibilities• Inspect sites regularly to identify problems, priorities the urgent works and do necessary maintenance.• Manages the day-to-day maintenance of HVAC systems, Electrical, Plumbing, Civil, and all the corresponding systems and components.• Manage and supervise the daily activities of the technical team• Ensures optimal usage of manpower and resources.• Oversees and carries out maintenance and repair of equipment.• Ensures MEP systems' compliance with legislative requirements and standards.• Coordinates with Operation personnel for planned and corrective maintenance of other systems.• Provides front line technical support to the asset ensuring that the troubleshooting is managed efficiently and effectively.• Participates in Incident investigations and produce reports.• Ensures the 'maintenance of the equipment' delivers continued safe and reliable operation.• Attending any emergency cases out of working hours.• Supports and recommends preventative maintenance programs for HVAC, Electrical, water supply and drainage systems.• Provides technical support when needed with on-call and/or weekend coverage support.• Provides oversight and quality control of the work being performed• Identifies the training needs for the Maintenance team.• Generate the work orders through Maximo and assigned them to the technician and follow up till completion of the work• Taking care of the assigned PPM properly completed on site by technician which is assigned to them through Maximo and making of PPM defect report after weekly ppm is over• Submission of daily maintenance work executed at site with photographs• Daily entry of the work executed at site by technicians Show less