IHSAN MOHAMED IEng MCIBSE (UK) ,B.Sc, PE-SCE

Experience

• 

  Consulting Engineers & Contractors (Pvt) Ltd, (CEC)

  May 2011 - Aug 2011

  Graduate Engineering Trainee
• 

  Sri Lanka Ports Authority (SLPA)

  Jun 2012 - Nov 2012

  Graduate Engineering Trainee
• 

  Focus Design Partners

  Aug 2013 - Feb 2017

  Mechanical Engineer

  ProjectTuscan Tower (14B) - (3P+GF+MZ+AM+21+RF)Pearl Qatar.Worked as secondment in @ATKINS- HVAC system ( Ventilation system, district cooling chilled water system, VRF, DX-split, CRAC, and FAHU / AHU/ FCU).- Fire Fighting system ( Wet sprinkler system, Standpipe & hose system, Deluge foam system, FM200 system, and fire extinguisher).- Plumbing system( cold water and centralized hot water system).- Drainage system.- Swimming pool and water features. - Irrigation system. - Centralized pneumatic Garbage chute system. Show less

• 

  LACASA Architects and Engineering Consultants

  Mar 2017 - Mar 2019

  Mechanical Engineer

  ProjectsDAMAC Tower (B+G+2P+21)Mix 26 (3B+G+MZ+18) Towers LusailDuties & Responsibilities as Site Supervising Consultant:• Review the Mechanical shop drawings, material submittals, pre-qualifications, and technical calculations alongside method statements, ITPs, and Quality Checklists for acceptance. • Monitor the mechanical works for conformance with the provisions of the contract documents, approved drawings, project specifications and requirements, manufacturer’s instructions, and the procedures manual.• Ensure that the quality of all Mechanical works carried out at the project site is as per the client's requirements and in compliance with the project quality plan (QPP) & Inspection Test Plan (ITP).• In support of the Sr. Mechanical Manager to review the Mechanical technicalities, Shop Drawings, Material Submittal, Mechanical Calculations, and technical issues.• Conducting daily site visits with the contractor QC team to monitor the Quality of work executing at the Site and maintaining the standards of execution by complying with Safety requirements.• Perform inspection of materials arriving at site & work done when advised.• Issue Site Observation & Potential PNCR when the specification or procedural requirements are not met/violating the compliance of the requirements with Project Technical requirements.• Inspect the Work inspection and Material Inspection, offered by the contractor, and make sure that all inspection Requests (IR) are provided with sufficient attachments such as the Test Report, Calibration Certificates, previous copies of the inspection report, and As-Built drawings.• Assist the Commissioning Team in the Pre-commissioning & Testing and Commissioning stages of all Mechanical systems.• Report directly to the RE/ Site Manager/Supervising director/Client.• Prepare a special report to the Project Director/Manager to investigate any problem related to the Scope of Services and recommend solutions to Management. Show less

• 

  Corduff Oman , https://corduffoman.com/

  Jul 2019 - Jan 2021

  Senior Mechanical Engineer

  - Construction of Oman Aviation Academy at Sohar Airport -Oman. Duties & Responsibilities as Site Supervising Consultant:• Review the Mechanical shop drawings, material submittals, pre-qualifications, and technical calculations alongside method statements, ITPs, and Quality Checklists for acceptance. • Monitor the mechanical works for conformance with the provisions of the contract documents, approved drawings, project specifications and requirements, manufacturer’s instructions, and the procedures manual.• Ensure that the quality of all Mechanical works carried out at the project site is as per the client's requirements and in compliance with the project quality plan (QPP) & Inspection Test Plan (ITP).• In support of the Sr. Mechanical Manager to review the Mechanical technicalities, Shop Drawings, Material Submittal, Mechanical Calculations, and technical issues.• Conducting daily site visits with the contractor QC team to monitor the Quality of work executing at the Site and maintaining the standards of execution by complying with Safety requirements.• Perform inspection of materials arriving at site & work done when advised.• Issue Site Observation & Potential PNCR when the specification or procedural requirements are not met/violating the compliance of the requirements with Project Technical requirements.• Inspect the Work inspection and Material Inspection, offered by the contractor, and make sure that all inspection Requests (IR) are provided with sufficient attachments such as the Test Report, Calibration Certificates, previous copies of the inspection report, and As-Built drawings.• Assist the Commissioning Team in the Pre-commissioning & Testing and Commissioning stages of all Mechanical systems.• Report directly to the RE/ Site Manager/Supervising director/Client.• Prepare a special report to the Project Director/Manager to investigate any problem related to the Scope of Services and recommend solutions to Management. Show less

• 

  Construction Development Company LLC (CDC)

  Jan 2021 - May 2023

  Senior Mechanical Engineer

  Project : 5 Star Beach Hotel & Branded Residence ProjectClient: Al-Fardan Hotel & ResortsMain contractor: Construction Development Company (CDC)Duties & Responsibilities as Main Contractor:• Responsible for monitoring of the MEP Subcontractor’s site in accordance with the Contract and maintaining standards of delivery including quality, health, and safety.• Direct report to the Technical Director and MEP manager.• participate in relevant meetings, prepare progress reports and follow required checking procedures• Collaboration between all departments (Civil, Architect, ID, Electrical & Procurement) for engineering and site work.• To ensure the satisfaction of the client, authorities, and consultant. • Working with design modification if any new requirement from the client.• Design modification to comply with Authority comments to get approval.• To review and approve Mechanical design calculations before submission.• MEP coordination shop drawing verification through modeling (Navisworks).• Propose & submit Material submittal, Shop drawing, RFI, and Method statement based on Project requirements & budget.• Directly involved with trekkers for site progress in line with the project schedule.• Provide support to the Manager in managing the project budget and ensuring that project costs are kept within the approved limits.• To guide the technical engineers/draftsmen through the work activities management process throughout the duration of the project engineering phase Show less

• 

  UCC Holding

  Sept 2023 - Sept 2024

  Senior Mechanical Technical Engineer

  Project: Yanbu Entertainment Complex- KSAClient: SEVENPMC : EGISConsultant : DAR Al-HANDASADuties & Responsibilities as Main Contractor:• Responsible for monitoring of the MEP Subcontractor’s site in accordance with the Contract and maintaining standards of delivery including quality, health, and safety.• Direct report to the Technical Director and MEP manager.• participate in relevant meetings, prepare progress reports and follow required checking procedures• Collaboration between all departments (Civil, Architect, ID, Electrical & Procurement) for engineering and site work.• To ensure the satisfaction of the client, authorities, and consultant. • Working with design modification if any new requirement from the client.• Design modification to comply with Authority comments to get approval.• To review and approve Mechanical design calculations before submission.• MEP coordination shop drawing verification through modeling (Navisworks).• Propose & submit Material submittal, Shop drawing, RFI, and Method statement based on Project requirements & budget.• Directly involved with trekkers for site progress in line with the project schedule.• Provide support to the Manager in managing the project budget and ensuring that project costs are kept within the approved limits.• To guide the technical engineers/draftsmen through the work activities management process throughout the duration of the project engineering phase Show less

• 

  Assystem

  Sept 2024 - now

  Lead Mechanical Engineer

  Dussur SeAH EPC Stainless Steel/Alloy Seamless Pipes and Tube Plant Project in King Salman Energy City (SPARK)The project entails the Engineering, Procurement & Construction of Saudi Arabia’s First Stainless Steel Seamless Pipes & Tube Plant spreading over 170,845 SQM with a fully integrated manufacturing facility, having a capacity of 17,000 tons of High-Value Added Stainless Steel Pipes and Tubes annually.Lead the MEP team with technical expertise.Review the design submitted by the EPC contractor. Serve as the primary technical authority for the delivery team.Developing Quality and Process Management:Define and implement QA/QC processes.Apply and oversee policies related to process, quality, and training.Ensure accuracy and technical correctness in QAQC documentation.Actively participate in QA/QC processes and end-of-stage reviews. Show less