David O Dare

Experience

• 

  Holborn Nigeria Limited Bompai Industrial Estate Kano

  Jun 1998 - Aug 2002

  Plant Engineer

  1. Carry out preventive and breakdown maintenance such as overhauling on the Cummins & Perkins Gen sets. Ranging from 27KVA to 1000KVA in the plant.2.Maintain optimal performance of all the Air compressor, steam boilers, water pumps.3. Monitor the operations and performance of all the plant machineries and equipment such as; Hydraulic and pneumatic pumps, Turbines, Blowers ranging from 10HP to 80 HP 4.Ensure that all the cooling systems within the plant such as; Chillers of up to 250 Tons, Central A.C systems, Window and split A.C Systems of 2HP &5HP respectively are working effectively.5. Prepare the entire proactive maintenance schedule for all the equipments and the entire plant.6. Carry out Test running, and Commissioning on all the installed plant equipments and machineries.7. Carry out preventive and breakdown maintenance on all the company vehicles according to the manufacturers specifications.8. Ensure stable fuel supply for the company vehicles and the 1000KVA Gen sets.9. Prepare efficient preventive maintenance schedule for all the company vehicles, Generators, and other utility Equipment such as Steam boilers, Air compressor, Pumps, Chillers, Blowers, and HVAC Equipments. e.t.c. 10. Supervises and coordinates the activities of maintenance Technicians and movement of company drivers and endorses the log book and daily report issued on each job carried out.11 Implement health & safety policies according to the Industrial safety regulations.12 Implement daily maintenance plan and work scheduled for all the utilities Equipments including HVAC Equipments of about 30HP.13. Operation and Maintenance of Cranes, gearbox, Couplings, Wire ropes, Hydraulic breaks. Show less

• 

  M Telcom Limited

  Oct 2003 - Dec 2010

  Utilities & Power Engineer

  OPERATIONS AND MAINTENANCE OF OVER 80 BTS CELL SITE& MOBILE SWITCHING CENTER.1. Carry out installations and Maintenance on power and cooling systems, Gen sets, and associated Accessories E.g. Rectifiers, Transformers, Stabilizers, UPS system, AMF & ATS panel installed at Mobile Switching Center (MSC).2. Maintain the optimal performance of all cooling and power systems within the BTS; and installation of Earthing systems, surge suppression 3. Conduct routine maintenance of all power and cooling systems at the various Base Transceiver Station Installations including all the Electrical control systems4. Participate in Acceptance Testing on completed power installations and recommend documents on power handover for endorsement.7. Prepare periodic reports on power supply activities within the Mobile Switching center. 8 Ensure that power and cooling system parameter at Installations are in line with the company specifications within BTS cabinet.9. Carry out major repair on the Gen sets, Automatic change over power panel Window AC Split units, Centrifugal Pumps installed at the Base Transceiver Stations (BTS) Show less

• 

  Obax Worldwide Limited

  Mar 2011 - Jan 2013

  Senior Mechanical Engineer

  EARLY PRODUCTION FACILITIES ( EPF ) & GAS PROCESSING PLANT.• Provide engineering support to the construction / commissioning phases with detail design inputs necessary for the flow station and Gas processing plants.• Prepare requisitions and Technical evaluation of bids for discipline material and equipment sourcing.• Carrying out installations, Pre-Test, and Commissioning of all types of rotating equipment, pumps, Air compressors, fans, gas turbines, Heat exchangers, Boilers at Flow station.• Carrying out installations and maintenance repairs on installed cooling systems HVAC equipment encompass Window unit, Split unit, and Central Unit A.C at the Control room.• Monitor the performance and operations of the Rotary Screw Air compressor, and Reciprocating Air compressor, Centrifugal Air compressor at Flow station.• Carrying out installations, Startup & Commissioning for the Generating plants ranges from 100KVA to 450KVA Diesel fired and Gas Fired Gen sets at Gas processing plants.• Prepare efficient preventive maintenance schedule for all kind of pumps, Air compressors, Turbines, Gen sets, Heat exchangers, valves installed in the Flow station system.• Ensure that all the safety relief valves, booster compressor, Heat exchangers, High-pressure separator, are in optimal performance installed in the Flow station.• Carrying out Pre-commissioning, Startup and Commissioning Protocol for the early production facilities and Gas Processing plant. Show less

• 

  RoyalhakoningDHV

  Apr 2013 - Dec 2015

  Senior MEP Engineer

  Royal HaskoningDHVSite supervision, inspection, carrying out Pre Test Protocol, Functional Test protocol, for all MEP Installations.as follows;-Electrical Installations;- Electrical power distribution system , ; Earthing & Lightning, Fire alarm and smoke detection system, Lighting fixtures & fittings & emergency light, External pole light, CCTV Cameras, IT Backbone Network, MDF Cabinet, & IDF Cabinet, Gas suppression system, MV Panel distribution Network Stepdown Transformer from 11 kV to 415 volts , LV Panel, & Distribution board, Switches & Sockets, SOP .( Socket out.let points )Mechanical Installations:- Mechanical:- Carrying out inspection and Supervision, Acceptance Test Protocol, Pre Test Protocol, and Functional Test Procedures for Fire Protection system such as Sprinkler system, In rack Sprinkler system, External Fire hydrant system, Fire hose reel Gas suppression system. Wet services and Plumbing system, such as internal cold water reticulation system, Sanitary drainage system, Roof gutter, rain downpipe, Sanitary Accessories & fixtures, Water Treatment Plant, Sewage Treatment plant, HVAC System, Chilled water plant, Rooftop Package units, Ducted hideaway split units, Ceiling cassette units, VRV System, and wall-mounted window units. Extractor ventilation fans, blowers, Show less

• 

  Aurecon group

  Jan 2016 - Nov 2017

  Senior MEP Engineer ( Mechanical )

  Senior MEP Engineer Role ;- This includes ,Preparing bill of quantities and preparing Tender Packages, and carrying out design review for the HVAC System , Wet services and Plumbing system ,Industrial Fire Protection system such as , Sprinkler systems, Fire hose rack & External Fire hydrant system, In rack sprinkler system , HVAC Equipment’s detail design by using Cooling load calculation software's CMMS, SAT/LR4 and so on.Pump selection and sizing based on hydraulic calculation , Fire pumps Fire water Epoxy Tank, Air handling units, Water Treatment Plant , Waste water Treatment plant, Sanitary systems. Supervision roles :- includes, check listing, Acceptance Test procedures, start up , and commissioning in compliance with E & I regulation, NFPA standards and codes , ASHREA,& CIBSE , AWWA. NBC, BS. and other Engineering standard regulation.Facilities Manager roles ;- includes operation and maintenance of MEP System, Plants Equipment and Machineries such as Generating plants, Air compressors, Different types of pumps, Cooling systems, Steam boilers, Sanitary installations, Safety & Fire hydrant system, hydraulic and pneumatic systems , Water Treatment plant, Sewage Treatment plant, Early production Facilities (Flow station ) Oil & Gas Terminal operations and so on. Show less

• 

  Facilities Management & Maintenance Company, L.L.C

  Dec 2017 - now

  Lead Mechanical Engineer & HOD MEP

  Duties & Responsibilities:• Carrying out preventive, corrective, and Conductive maintenance program me for all the Heating Ventilation and air – conditioning Facilities ( HVAC Systems ) • Carrying out operation and maintenance program me for all the Wet services and Fire protection system. • Carry out efficient PM on critical utility Facilities such as Generators, boilers, Chiller plant, Pumps, HVAC Systems, Fire protection system and Elevator lifts.• Carry out efficient monthly consumption reports on utilities ( Water meter reading, Energy, and Air quality report ) • Prepare Incidents & Accidents investigation report when necessary. • Carrying out the preparation of all relevant HSE permit (Method statement, risk assessment, Incident reports, HSE Toolbox talks, prepare COSSH.• Assigning work order and Supervision of the Technical Team in the department. • Monitor performance of the maintenance execution carried out by subcontractors on KPI Scale.• Assist in establishing and implementing training programs for the Technical Staff. • Manage and control the maintenance budget for personnel & Procurement. • Recruit and train Technical staff as required meeting the department needs.• Coordinates the Tender review/validation process for the subcontractors. • Carrying out Design Management (reviewing design liaising with the client, and other stakeholders )• Supervise and give approval for the Procurement of subcontractors. • Carrying out approval for all Technical submittals and RFIs received from the Client.• Carrying out Value Engineering where applicable on the Project. • Carrying out Management of variation and approval for all the valuation claims. • Coordination and supervision of the entire Team (overseeing junior engineers, construction supervisors)• Coordination and attending the weekly operational meetings with sub-contractors, client and internal meetings Show less