M.Sathik Ali, B.Eng., MBA (PM), DECE, Engr. (SCE)

Experience

• 

  Rezayat Group (National Contracting Company, NCC-T&D)

  Mar 2006 - Feb 2007

  Testing & Commissioning Engineer

   Installation , Testing & Commissioning of Sub-Station equipments such as Current Transformer, Potential Transformer, Circuit Breaker, Panels (Control, Relay, AC, DC, Annunciation, Communication, Fault Recorder, etc.) Testing of ABB make Control and Relay Panels. Testing of 230 kV SF6 Circuit Breaker Functional Checking of Control Relay Panels (ABB) for Distance Protection Functional Checking of Sequence of Event Recorder (SOE), Transient Fault Recorder (TFR), Communication Panel & SCADA Panel Preparation of Control Cable Schedules, Termination Schedule. Coordination with site (Site & Commissioning Engineers) for smooth execution of work at site Co-ordination with Customer & the Supplier for complete commissioning of the Project. Project Planning and Material Scheduling. Reply to Client & Consultants comments Submission of documents and getting approvals for the same. Preparing As-built drawings according to the site modifications. Show less

• 

  Elemec Agents for SIEMENS AG, Germany

  Mar 2007 - Jan 2009

  Project Engineer

  As a Project Engineer,- Installation and Testing and Commissioning of SIEMENS make 11kV Switchgear (8DA10-GIS & NXPLUS C) Equipments like Current Transformers, Voltage Transformers, SF6 Circuit Breaker, Disconnectors and Earth Switches.- 11kV (8DA10-GIS & NX-PLUS C) SIEMENS Switchgear Functional Interlock Testing. - Complete Study of Existing Control System Contains 11kV Switchgear, Centralized Control Board (Mimic), Panels like Electrical Relaying & Decoupling (ERD), Control High Voltage (CHV), Loading & Re-loading (LRL), Generators and Turbines etc.- Testing of Transformer, Feeder and Cable Protection relays 7SJ63,7SJ600,7SJ602, Solkor N , Solkor RF - Modification of Protection and Control Circuits.- Matching the Existing Protection and Control System with New Protection and Control System without affecting the Existing logic.- Preparing Existing and New Cable, Termination Schedules.SCADA Adaptation and DMS Adaptation. Provide technical direction and support to design, execution and Customer relating to transmission and substation issues Reviewing of 33kV & 11kV Schematic Drawings for Switch Gear (8DA10-GIS, 8DH10, NXPLUS C, NXAIR) Panels Associated in preparation of detailed engineering drawings from Single Line diagrams cater to customer requirements. Preparing pre-qualification submittal, base design submittal, technical Submittal etc. Show less

• 

  Fichtner GmbH & Co. KG

  Jan 2009 - Jun 2009

  Senior Electrical Engineer-Protection & Control (Project Engineering & Management Consultant)

  As a Project Management & Engineering Consultant(Approved Electrical Protection & SCS Engineer by Qatar General Electricity & Water Corporation - KAHRAMAA in Qatar Power Transmission Expansion Projects Phase 10, Phase 8 & Phase 7 up to 400kV)- Review and Approval of all technical documentation for P&T systems of ABB, SIEMENS, Substations (400kV, 220kV, 132kV, 66kV & 11kV) based on Client Specifications.- Review and approval of Contractor's work scheduling- Execution of in-site design work if necessary- Monitoring and quality control of Contractor's work with regard to- Inspection and approval of all P&T equipment/materials- Participation during Site Acceptance Tests like - Protection Relay Testing & Final Setting - Complete Substation & Protection Scheme Testing - Bus bar Stability Testing - Protection End to End Testing - Transformer Stability & Line Stability Testing - Final Trip Test & Commissioning- Enforcing of work security and safety- Keeping of accurate field books and records in order to verify executed work and approve invoices- Preparing and executing of regular Site Meetings- Co-ordination with adjacent contracts with regard to protection co-ordination- Assistance for Preparation of variation orders, if necessary Show less

• 

  Lahmeyer International - A company of Tractebel

  Jul 2009 - Jan 2014

  Senior Electrical Engineer-Protection & Control (Project Engineering & Management Consultant)

  As a Project Management & Engineering Consultant(Approved Electrical Protection & SCS Engineer by Qatar General Electricity & Water Corporation - KAHRAMAA in Qatar Power Transmission Expansion Projects Phase 10, Phase 8 & Phase 7 up to 400kV)- Review and Approval of all technical documentation for P&T systems of ABB, SIEMENS, ALSTOM & HYOSUNG Substations (400kV, 220kV, 132kV, 66kV & 11kV) based on Client Specifications.- Review and approval of Contractor's work scheduling- Execution of in-site design work if necessary- Monitoring and quality control of Contractor's work with regard to- Inspection and approval of all P&T equipment/materials- Participation during Site Acceptance Tests like - Protection Relay Testing & Final Setting - Complete Substation & Protection Scheme Testing - Bus bar Stability Testing - Protection End to End Testing - Transformer Stability & Line Stability Testing - Final Trip Test & Commissioning- Enforcing of work security and safety- Keeping of accurate field books and records in order to verify executed work and approve invoices- Preparing and executing of regular Site Meetings- Co-ordination with adjacent contracts with regard to protection co-ordination- Assistance for Preparation of variation orders, if necessary Show less

• 

  Sadara Chemical Company

  Mar 2014 - Oct 2017

  Lead Electrical Engineer/Specialist (Engineering & Relay Protection)-Project Management Consultant

  As a Project Management Consultant (PMC) in Commissioning & Start Up Managing & Leading the Electrical Team consists of several engineers & technicians in terms of Commissioning-Start Up Activities & Maintenance Support Activities within the defined Budget & Time Frame in both technically & commercially. Review and approval of all technical documentation for P&T systems of 60 Substations , Voltage Levels of 230kV, 34.5kV, 13.8kV, 4.16kV & 480V based on Client (Saudi Aramco & DOW) Specifications. Actively Participating & Witnessing in Start Up & Commissioning of Power Distribution (PD) Switching & Distribution Substations (230kV & 34.5 kV), Steam Generation Unit (SGU) (13.8kV, 4.16kV & 480V) Co-ordination with adjacent contracts with regard to protection co-ordination Preparing Start Up & Commissioning Procedures, Maintenance Procedures for Power Distribution Substations (230kV & 34.5 kV), SGU (13.8kV, 4.16kV & 480V) Assisting & Directing the Main Contractors in Technical Issues like Configuration of Relays, Testing of Relays, Trouble Shooting of Protection Schemes and Retrofitting of Relays, etc. Review and approval of Contractor's work scheduling Execution of in-site design work if necessary Monitor/Witness and quality control of Contractor's work with regard to- Inspection and approval of all P&T equipment/materials- Participation during Site Acceptance Tests like- Protection Relay Final Setting Testing & Protection Scheme Testing- Bus bar Stability Testing - Protection End to End Testing- Transformer Stability & Line Stability Testing- Final Trip Test & Commissioning Enforce of work security and safety by all means. Keep of accurate field books and records in order to verify executed work and Approve invoices Prepare and executing of regular site meetings Show less

• 

  Aramco

  Mar 2019 - now

  Lead Electrical Engineer (PMT-Project Management Team)