SAIFUL HIDAYAT

Experience

• 

  PT. GEOTECH ENGINEERING INDONESIA

  Nov 2010 - Apr 2011

  TESTING ENGINEER

  PT. GEOTECH ENGINEERING INDONESIA (Consultant) Position Title (Level) : TESTING ENGINEER Specialization : Consultant Geotechnical FoundationRole : Civil EngineerIndustry : Consultant / Foundation / SoilWork Description:1. Test pile by using a PDA (Pile Dynamic Analyzer) tool to locate data piling foundation strength, bearing capacity of foundation, as well as finding the decline foundation if it is not finished.2. Test pile by using a PIT (Pile Integrity Test) tool to locate cracks, breaks, broken stakes in the ground.3. Soil tests using tools Inclinometer tool to find the data that land shifts can be caused by surrounding buildings or vehicles encouragement.4. Loading test this tool using stacks of concrete blocks arranged in a terraced umpteen ton loads planned and measured on the indicator needle. Show less

• 

  PT. PP-TAISEI INDONESIA CONSTRUCTION

  May 2011 - Mar 2012

  MARK. & ENGINEER STAFF

  PT. PP-TAISEI INDONESIA Position Title (Level) : ENG. & MARK. (Fresh Grad / Less than 1 year experience)Specialization : Engineering - Civil/Construction/StructuralIndustry : Construction / Building / EngineeringWork Description: 1. Calculate the total volume of the building.2. Calculate the budget planning and building.3. Preparing tender documents for procurement.4. Comparing price quotes from sub-contractors.5. Check the material data in the planning of construction materials.6. Submit attachments tender documents Show less

• 

  Shimizu Corporation -Japan

  Mar 2012 - Mar 2013

  QC. Supervisor

  PT. Bangun Cipta – SHIMIZU Joint Operation Position Title (Level) : Quality Control Supervisor (Supervisor / Coordinator) Specialization : Engineering - Civil/Construction/StructuralIndustry : Oil / Gas / PetroleumProject : DONGGI SENORO LNG PROJECTClient : PT. DONGGI SENORO Work Description:1. Check quality of materials Construction.2. Inspection the implementation of the work of formwork and rebar.3. Supervise the work of casting concrete.4. Attend and oversee the implementation of concrete compressive strength test.5. Make NFI (Notification for Inspection).6. Making Record Quality related Document (Data of Joint Survey, Verticality).7. Prepared Document related for Hand over Document (Quality Records for construction)8. Concrete mix design for each strength requirements.9. I can do some test trials concerning the quality of concrete.10. Knowing Standard Specification for tolerances for Concrete Construction and Materials (ACI).11. I know the Standard Practice for Curing Concrete. Show less

• 

  TRIPATRA

  Apr 2013 - Aug 2015

  QC. ENGINEER CIVIL

  PT. TRIPATRA – SAMSUNG CONSORTIUMPosition Title (Level) : QC. Engineer CivilSpecialization : Engineering - Civil/Construction/StructuralIndustry : Oil / Gas / PetroleumProject : Senoro Gas Development ProjectClient : PT. PERTAMINA - MEDCO Join Operation BodyWork Description:1. Site preparation Check and crosscheck Completion data record handover plant (land clearing, topography, data record Survey and Soil investigation)2. Pilling Work, Location Number and Size of Pile, Pile Driving Record, Pile Static Load Test (lateral and axial) and Final Test (Calendaring data, PDA test)3. Concrete, Concrete Material Slump test, Concrete Test Compressive Strength, Concrete Pouring, Elevation, Flatness, Curing Concrete Finishing. Foundation Work, Reinforcing Bar Work, Rebar Material, Diameter Bending, Lap Length, Surface Cleaning of Rebar, Form Work, Chamfer Spacer, Dimension Alignment and Stability, Anchor Bolts Embedded Items.4. Drainage Work, Open Ditch, Excavation, Form Work, Dimension, Slope, Bottom Width, Height.5. Road / Rigid Pavement, CBR Test, Compacted Subgrade, Slope, Concrete Paving Heavy Duty Light Duty, Expansion & Construction Joints, Dowel Bar (With Plastic For Sliding), Joint Sealer.6. Steel Structure, General Structure Erection, Chipping Padding Work, Bolt Tightening, Verticality, Grouting Work.7. Building Work, Brick Wall Hollow Block, Lintel Beam, Horizontal & Vertical Bar, Mix Design Concrete Filled, Practical Column, Wall Ceiling and Floor Finishing, Painting For Wall and Ceiling, Moisture Content Wall, Door & Window Installation (Functional Test), Waterproofing Roof and Toilet (Overlap Joint, Leakage Test), Pressure Test / Leakage Test Clean Water Plumbing Service Test, Layout and Installation of Pipe Sanitary Facility. Show less

• 

  PT. Wijaya Karya Industri & Konstruksi

  Aug 2015 - Jun 2017

  QC. CIVIL INSPECTOR

  PT. Wijaya Karya - Technip ConsortiumPosition Title (Level) : QC. Inspector Specialization : Engineering - Civil Industry : Oil / Gas / PetroleumProject : Matindok Gas Development ProjectClient : PERTAMINA EPWork Description:1. Reviewing preparation Application for Inspection (AFI) request every day. (Material Receiving Inspection, pre pouring concrete inspection, Building Inspection, Steel Structure Inspection, Geotech Inspection, Soil Investigation Inspection, Drainage Inspection, Rigid Pavement Inspection, Slope Protection Inspection (shotcrete, gabion, etc.)2. General Civil Inspection, Concrete Material Slump test, Concrete Test Compressive Strength, Concrete Pouring, Elevation and Coordinate, Flatness, Foundation Work, Formwork, Reinforcing Bar Work, Rebar Material, Diameter Bending, Lap Length, Surface Cleaning of Stability, Density Soil Test, Dimension, Slope, Road and Rigid pavement, CBR Test, Sand cone Test, Lean concrete, Compacted Subgrade, Slope, Concrete Paving Heavy Duty/Light Duty, Expansion & Construction Joints, Dowel Bar (With Plastic) For Foundation Work and Installation. Pipe Support Foundation Work, Sprinkle, Finish Floor, Verticality, Grouting Work.3. General Structure Member Erection, Chipping Padding Work, Verticality, Skidmore Wilhelm Torque Test, Tightening Bolt, Grouting Inspection.4. General Roofing Cladding Inspection Installation, Fascia Gutter.5. Building Work, Brick Wall Hollow Block, Lintel Beam, Horizontal & Vertical Bar, Mix Design Concrete Filled, Practical Column, Wall Ceiling and Floor Finishing, Painting For Wall and Ceiling, Moisture Content Wall, Door & Window Installation (Functional Test), Waterproofing Roof and Toilet (Overlap Joint, Leakage Test), Pressure Test / Leakage Test Clean Water Plumbing Service Test, Layout and Installation of Pipe Sanitary Facility. Show less

• 

  Sika

  Aug 2017 - Dec 2017

  Quality Control Engineer

  PT. Aptekindo - SIKA Indonesia (Contractors) Position Title (Level) : QC. EngineerSpecialization : Concrete, Shotcrete (Ground Support Mining)Industry : MiningProject : GBC Underground Mine, DMLZClient : PT. FREEPORT INDONESIAWork Description:1. Training 2 week at PT. Sika Indonesia, Cileungsi (Introduction about the product Sika Concrete Admixtures and Shotcrete Admixtures), Design mix Concrete for type High Performance Concrete (HPC), Design mix Shotcrete with plastic fiber, trial mix for this design, testing fine and coarse aggregate (sieve analysis, moisture content, specific gravity, Colloid Content, Fineness Modulus, Water Absorption).2. Check and test material site on stockpile fine and coarse aggregate (sieve analysis, moisture content, specific gravity, Colloid Content, Fineness Modulus, water Absorption).3. Trial mix design for concrete and shotcrete.4. Trial Mix design for High Performance Concrete (HPC) with Fiber Fc’ 80Mpa – Slump/ flow: 8”-10”/24”. Admixture with Sika Stabilizer and Sika Viscoflow3211NA.5. Trial Mix Design for Shotcrete (wet mix) with fiber Fc’ 40Mpa – slump/ flow: 8”-10”/24”. Admixture with Sikatard 930 and Sika Viscocrete SC305.6. Trial Mix design for Concrete with fiber Fc’ 40Mpa – Slump/ flow: 8”-10”/24”. Admixture with Sika Stabilzer and Sika Viscoflow3211NA.7. Trial Mix design for Concrete without fiber Fc’ 40Mpa, 60 Mpa and 80Mpa – Slump/ flow: 8”-10”/24”. Admixture with Sikatard 930 and sika Viscocrete SC305.8. Daily Activity Check Moisture Content sand and gravel, slump/flow test, making sample, testing sample (compressive strength test).9. Make sure fresh concrete and shotcrete can be use good quality for construction. Show less

• 

  PT. Wijaya Karya Industri & Konstruksi

  Jan 2018 - Jun 2018

  QC Inspector Civil

  PT. WIJAYA KARYA (Persero) Position Title (Level) : QC. Civil InspectorSpecialization : Oil / Gas / PetroleumIndustry : AVIATION INDUSTRY AIRPORTProject : SATELLITE & DPPU BANDAR UDARA KERTAJATIClient : PT. PERTAMINA - AVIASIWork Description:1. Reviewed for ITP requirement 2. FAT for Material PMA3. Site Preparation and soil investigation4. Sand cone Test and CBR Test for Compacting soil5. Monitoring backfill and compaction material6. Monitoring Supply Fresh Concrete vendor7. Inspection reinforcement bar and formwork Installation8. Inspection Satellite office building area 9. Monitoring and testing Piling work for Tank avgas, Building facility10. Inspection road and pavement11. Inspection Drainage system, Valve Chambers at Apron Airport Show less

• 

  TRIPATRA

  Jun 2018 - Nov 2020

  PT. TRIPATRA Engineers & Constructors Position Title (Level) : Sr. QC. Engineer (Civil)Specialization : Engineering – CivilIndustry : OIL & GASProject : EMILY-1 Project Fuel Terminal & Jetty (BALIKPAPAN)Client : INTERPORTWork Description:1. Witnessing and sentencing of all site inspections within their disciplines 2. Coordination all site inspections with the site subcontractors 3. Ensure that all inspection reports are accurate and that all attached documents are current status 4. Ensure all work is correctly prepared prior to any inspection being undertaken 5. Review all inspection reports for compliance 6. Lease with the site construction engineers and provide assistance when requested 7. Prepare nonconformance reports to the QA manager and assist in developing corrective actions 8. Coordination with the customers QC inspectors for the resolution of site problems 9. Coordination with the site subcontractors to ensure that communications exist and are maintained 10. Assist the site subcontractors in the resolution of drawing interpretation 11. Attend the weekly QC meetings 12. Review work procedures and method statements for compliance with good work practices and the customers contract specializations 13. The issuance of nonconformance reports in conjunction with the site QC manager14. The completion of QC site instructions and coordinate their closure The review of inspection test packages during the course of construction activities 15. Compliance with the site's health and safety regulations Show less PT. TRIPATRA Engineers & Constructors Position Title (Level) : Sr. QC. Engineer (Civil)Specialization : Engineering – CivilIndustry : POWER PLANTProject : MPP 25 MW- NIASClient : PT. PLN (Persero) Work Description:1. Monitoring piling work, recording pile driving, calendaring Final Settlement, test pile load2. Sand cone & CBR test for compacting soil3. Monitoring Activity batching Plant for Trial Mix, Mixing Concrete and making Sample4. Summary Record for distribution Fresh Concrete 5. Inspection for Pre Pouring Concrete 6. Inspection Installation bar bending, formwork before pouring concrete and joint inspection with consultant7. Check coordinate, elevation and dimension every foundation checklist before pouring with surveyor8. Receiving material Inspection (MIRR), check for visual, dimension, as product and Approval PMA (Proposed Material Approval)9. Compressive Strength Test for sampling concrete 10. Test Tensile and banding for material rebar11. Inspection Verticality, Tightening bolt test, and completion frame of Steel Structure12. Inspection Installation Roofing, Cladding, Gutter, down spot, steel louver, flashing for warehouse or shelter 13. Inspection building area exterior and interior with design architecture and furniture14. Inspection for Road and Pavement for area Light duty or heavy duty and sidewalk15. Inspection drainage and open drainage system with crossing duct bank and culvert16. Inspection Precast for Panel Fence and Installation. Show less

  • Sr. QC. Engineer Civil

    Feb 2019 - Nov 2020

  • QC. Engineer Civil

    Jun 2018 - Feb 2019
• 

  RDMP Balikpapan JO

  Feb 2021 - Jul 2022

  QC CIVIL

  1. Implementation and monitoring for ITP system2. Update Cspace system for all inspection item3. Make report Site Observation Memo (SOM) for any deviation work performed by subcontractors4. Make Non-Conformance Report (NCR) for any major deviation work performed by subcontractors5. Daily, weekly, monthly report Inspection status6. Explain and ensure to the client that the problems that occur with our subcontractors have been analyzed and corrected according to standard procedures, specs and code7. Update and Review document status in Aconex data base Show less

• 

  Asia Pulp & Paper

  Aug 2022 - now

  Project Quality MonitoringWork Description:1. Monitoring availability of quality requirement in the project documents such as scope of work (SOW), Contract Appendices (Technical Specification, Procedure, etc.) and review accordingly. 2. Monitoring availability of Project QAQC personnel at site (qualified QAQC personnel with adequate experience & competencies). 3. Monitoring availability of Contractor Project Quality Plan (PQP) and Inspection & Test Plan (ITP) and review accordingly. 4. Monitoring availability of construction related method statement/ procedure as well as Inspection & Test procedure. 5. Monitoring availability of inspection & measuring tool / equipment as well as its calibration status. 6. Participate in project quality related meetings such as project QAQC Meeting, KMO, PreInspection meeting, Vendor meeting, etc. 7. Reviewed project QAQC weekly report, inspection/ test report, and other documents such as calibration certificate, personnel qualification certificate, material certificate, etc. 8. Monitoring inspection & test process and work compliance with the project requirement. 9. Monitoring project quality implementation through work / process flow compliance. 10. Monitoring status for project NCR issued (all NCRs should be closed in due time) 11. To identify potential issue / problem that could have a more serious impact in the future if action/ mitigation is not carried out in time. 12. Regarding monitoring issue, bridging communication between related parties such as the project team. 13. If any action or follow-up is required regarding existing quality issue, also expedite in term of confirming/ reminding/ supporting the implementation of the follow-up action 14. To provide advice/ input/ suggestion based on monitoring output for any aspect related to construction quality. Show less

  • Expert Project Monitoring Engineer

    Feb 2024 - now

  • QA/QC Expert Civil & Structure

    Aug 2022 - now