Mohamed Eldeeb

Experience

• 

  ADMA-OPCO

  Aug 2006 - Dec 2007

  NDT & Welding inspector - Through Inspecta International Company.

  Co- ordination the NDT activities with NDT team and reviewing the reports, inspection of incoming materials. Preparation of plant failure reports and issuing recommendations. Involved in the major and small shutdowns. Carried out ultrasonic weld scanning, lamination check for raw materials, weld scan, thickness measurement on pipe lines & corrosion check on pressure vessels, & tanks.Carried out UT weld scanning, thickness survey, corrosion monitoring & as well as Internal Inspection in Columns, Vessels, Tank, Exchangers Separators, Condense Surge Drum, Fuel Gas Drum, nozzles etc.Having good knowledge in the film interpretation, developing and making reports.Magnetic particle inspection of both dry and wet methods including florescent method for various jobsCarried out MPI test on pipe welds along with qualified technicians. Magnetic Particle Inspection was carried out for various types of industrial components like joints, pipe lines, stands, and lift baskets. Carried out Magnetic Particle Inspection on welded joints of pipe line and Hardness testing. Having thorough knowledge in the procedure, and calibration etc.Carried out liquid penetrant and magnetic particle examination of nozzle joint, fillet weld and reporting.Performed RT, MT and PT Inspection for these companies NDC, SCECO and Al Nasr companies Show less

• 

  GUPCO

  Jan 2008 - Mar 2009

  Welding & Painting Inspector - Through Inspecta International Company.

  Reviewing WPS, Conducting PQR & WPQ as per ASME IX, ASME B 31.3, and API 1104.Participate for establishment of welding procedures specification (WPS), procedure qualification record (PQR) and the welders' qualification test in according of codes, standards, and specifications. Review of Radiographic films, reports, and coordinating with client for their review and approval.Monitoring and inspection of fit-up weld root & subsequent passes for pipe with dimensional.Preparing and keeping all documents (Checklist, Daily Production report, fit- up report) for final submitted to client.Ensure hardness after PWHT to confirm the adequacy of PWHT and do RT & MT if specifiedSet up a number system for the welds, and maintain weld history records, isometrics containing weld numbers and Welder’s identification, Ensure welders are working with qualified to the applicable WPS.Verification of Batch Certificates of Abrasives & Paints, Calibration Certificates that used to carry the work.Ensure storage of paint materials as per manufacturing Recommendations, Monitor weather conditions, Dew point, and steel temp, Monitor painting / coating / shrink sleeve operations and Witness Salt Test, Cross Cut Tests, and Pinhole tests as per the QCP.Ensure functionality of the painting equipment (Compressor, blasting pot, water jet and mixers) and calibration of measuring instruments (for DFT, WFT, Humidity, wind speed, salt contamination etc…) Show less

• 

  Khalda Petroleum Company (Apache)

  Apr 2009 - Nov 2016

  Inspection Engineer - Through Quality Control Company.

  Inspects and assesses the condition of process plant equipment at the required frequency, in accordance with the company’s procedure and code requirements.Perform internal, external and CUI inspection activates, corrosion monitoring, Nondestructive activates, repair, rerating, retirement thickness calculation, corrosion ate calculation, Remaining life calculation and failure investigation to establish inspection frequencies. Coordinate with NDT group after determining the appropriate NDT applicable to assess the equipment condition. Evaluate the result of all visual inspection and NDT data and determine the most optimal cost effective repair method and issue an inspection report (worksheet) outlining the repair and QA/QC steps. Direct, advice and instruct NDT technicians in the recommends of specific examination and performance of routine duties, evaluate inspection and NDT results and prepare reports with recommendation regarding potential repairs, fitness for service and anticipated equipment residual life.Calculate long and short-term corrosion rate, remaining life, and inspection interval and calculate the minimum required thickness for vessels head, shell and piping.Conducts remaining life assessments for in-service equipment and evaluate methods, techniques and material utilization for extended run lengths. Write inspection reports, worksheets, noncompliance reports and make logbook entries of onsite inspection findings, as appropriate, ensuring that and electronic databases are initiated and maintained. Show less

• 

  Petroleum Development Oman

  Dec 2016 - now

  Provide guidance to the project team on matters related to QA and support project initiatives to raise the quality awareness among project team members, contractors and vendors.Identify and manage risks that could influence achieving quality objectives.Preparation and Review the QA/QC procedures, QC plans / ITP and Method Statements.Monitor the implementation of the ISO-9001 Quality Management System in the Contract. Assist in monitoring/measuring the effectiveness of the QMS and contribute to its continual improvement.Review all Non-conformance reports, both internal & external audits, to ensure that appropriate corrective & preventive actions are in place to eliminate root causes. Monitor follow up to corrective & preventive actions reports.Manage set-up and implementation of Flawless Project Delivery (FPD) and Lessons Learned program; Manage establishment, monitoring, analysis, and reporting of project quality KPIs, issues, and trends; Establishing and maintaining a Quality Alert System to support Knowledge Management across the project team, and with key contractors/sub-contractors. Raising deviation / Technical Queries for quality related issues coordination and follow up with client/ subcontractor.Participate in audits and reviews, as required, e.g. pre-start-up audits, Final Acceptance Audits, Performance Tesrt functions including project quality planning, preventive action, non- conformance control, corrective action, assessments (audits) and project quality reporting and review. Carrying out project audits in accordance with the project assurance plan (QAP). Coordinate the quality site inspections through the site QC Engineers / inspectors. Increase project staff awareness and understanding of project procedures and their implementation. Show less Monitoring daily supervisory surveillance checks and records ensuring that contractor’s management and supervision are providing safe working conditions and permitting procedures, protective equipment and work force to execute the work as per contract schedule and targets.Witness Rotating equipment installation from Shim plate, Equipment installation, elevation, centering and released for grouting Preliminary and final alignment for pumps and motor, compressors, air fan coolers, overhead cranes and other mechanical rotating equipment as per project installation procedure, API codes, vendor installation manual.Witness static equipment installation and internals trays installation inspection like demister, swirl deck, Schoepentoeter, Mellachevron inspection & Witness Media filling, Ceramic balls and molecular sieve adsorbent.Witness Blower-Fan alignment, Pulley alignment and Belt tensioning as per vendor and project specification. Witness Overhead (EOT) Crane Gantry beam levelness inspection , Span and Elevation As per vendor instructions Crane installation, Orientation, access, ladders and platform installation, End stopper installation and witness Load and functional test. Witness Testing’s like Diesel Oil Chalk Test, Pneumatic Test, Vacuum Box Test and Hydrostatic Test.Check Tank dimensions against AFC Drawing, General Orientation, Main Dimensions, Tank Roundness, Tank Plumpness, Slope of Roof, and Position of the nozzles (orientation) and Projection of the nozzles. Inspection & witness of surface preparation & painting & lining activities of 19 condensate & water storage tanks external & internal with different painting systems.Witnessing inspection and installation of different types of insulation like “ Cold, Hot ,P.P & PFP insulation”Witness the relief valves testing, re-certification and update the next due tests.Witnessing inspection, testing, repair for Manual & ESD, MOV& PRV’s valves. Show less

  • Construction Interface Engineer.

    Oct 2022 - now

  • Quality Lead - MPP3 / MGCP Projects.

    Sept 2019 - now

  • Sr.QC Mechanical & Piping - RHIP Project.

    Dec 2016 - now