Roy Smillie

Experience

• 

  Score Group

  Jan 2008 - Nov 2018

  Employed as Workshop Team Leader based out of St John’s; Ensured all work is carried out in accordance with company policies, procedures, standards and work instructions.Provided technical support to the workshop team.Prioritising of workloads and labour to achieve maximum capacity to meeting deadlines.Ensuring adequate cover is provided for all shifts.Plan and co-ordinate project work.Prepared for and attended status meetings.Updating of status reports at each stage of a job.Arrangement of third party repairs and maintenance of fixed plant and equipment.Sourcing and purchasing of spares, materials and tooling.Arrange any third party or sub-contracting workscopes.Quoting of valve and actuator repairs.Monitoring and controlling costs of materials and labour on jobs.Maintaining good working relationships with clients, suppliers, sub-contractors and focal point’s both internally and externally.Continued offshore work when required. Show less Employed as a Diagnostics Engineering Technician gaining experience in;Installation, testing, calibration and maintenance of V-map (valve condition monitoring) systems on client sites and offshore.Conduct Midas Meter (acoustic emissions) surveys on client sites and offshore.Midas Meter (portable acoustic emissions sensor), Midas Sensor (fixed acoustic emissions sensor), strain gauges and pressure transmitters.Compiling site and offshore survey reports based on findings from Midas Meter and V-Map surveys and data.Strip, assess and re-assembly of all Diagnostic equipment.Continued work with Score (Europe) Limited offshore and site teams when required. Show less Served a 6 year Modern Apprenticeship gaining qualifications and experience as follows;HND in Mechanical Engineering - 2014HNC in Mechanical Engineering - 2012Modern Apprenticeship in Mechanical Manufacture Engineering (Fitting & Assembly) - 2012SVQ Level 3 Mechanical Manufacturing Engineering (Fitting & Assembly) - 2011NC in Mechanical Engineering - 2010SVQ Level 2 Performing Engineering Operations - 2008Offshore and Site - General valve and actuation maintenance and repairs, pressure safety valve campaigns, surveys, valve diagnostics, valve and actuation change outs, control valve maintenance and repair, troubleshooting and advise.General valves – ball valves, gate valves, globe valves, check valves, plug valves, vessels, gearboxes and actuators.Control valves – control valves, actuators, wellhead valves, high pressure gate valves and instrumentation.Pressure safety valves – conventional safety valves, bellows type safety valves, pilot operated pressure safety valves and vacuum pressure safety valves.Machine shop – lathes, milling machines, boring machines, slotting machines, surface grinders and drilling machines.Quality assurance department – QA procedures, QA cards, certification, calibration, goods receipt and documentation control.Engineering department – Engineering reports, procedures, bolt torques and Non OEM material selection.Drawing / Design Office – Drawing Procedures, technical drawing and documentation. Show less

  • Senior Field Service Engineering Technician

    Jan 2018 - Nov 2018

  • Workshop Supervisor Canada

    Jan 2017 - Dec 2017

  • Diagnostics Engineering Technician

    Aug 2014 - Dec 2016

  • Mechanical Engineering Technician

    Jan 2008 - Jul 2014
• 

  IKM Testing UK

  Feb 2019 - Jan 2020

  Mechanical Valve Operations

  I was responsible for being part of creating and implementing the valve division at IKM as a result of their product diversification project; • Reactive and forward planning of all valve operations within the IKM Aberdeen facility. • Coordinating all workshop activities for all upstream and valve operations. • Preparing and coordinating all valve related offshore campaigns. • Support all field operations across all IKM service lines, in the workshop, onshore, offshore and internationally. • Advise with all technical enquiries from the tendering department. • Preparing quotations for all valve operations including repairs, procurement, spares, materials, tooling, equipment and personnel. • Preparation of all new valve and actuation procedures including work instructions, risk assessments and toolbox talks. • Understand company QHSE systems, industry standards and ensure compliance. • Working within the confines of company budgets / capex allowances. • Liaising with clients and 3rd party suppliers to reach expected goals. • Knowledge and understanding of all relevant industry standards and specifications. • Carrying out all duties and responsibilities in accordance with all company policies, protocols, procedures, risk assessments and systems (including emergency and incident routines) as well as specific site assignment instruction/requirements. Show less

• 

  Severn Glocon Group

  Jan 2020 - May 2021

  Operations and Workshop Supervisor

  At Severn, I was responsible for all operational activities. Highlights of my time at Severn being, no workshop related injuries, no late deliveries, no over budget works, zero unproductive hours and creating and implementing Severns first Technician / Apprentice competency program. Other responsibilities / roles below; • Supervision of all Mechanics (engineers, technicians, machinists, welders and Apprentices), QA/QC, Stores Persons and 3rd party contractors. • Planning and prioritising of all workloads relating to workshop and offshore scopes.• Repair inspections, reporting, sourcing of all spares (OEM and non-OEM) / 3rd party activities / 3rd party equipment. • Preparation of all repair quotations and delivery to clients.• Review and approval of all sales quotations with additional workshop / 3rd party requirements. • Client Focal Point for all non-contract activities in addition to working alongside existing client focal points.• Provide full technical support to focal points with regards to all contracted activities.• Preparing for all offsite / offshore campaigns including maintenance, spares requirements, tooling, procedures and personnel.• Compiling and updating all internal work procedures, management procedures, risk assessments and toolbox talks.• Dealing with and implementing improvements from issues raised from internal and external non-conformances.• Knowledge and understanding of all required industry standards.• Personnel; recruitment, time keeping, six month and yearly review, improvement plans, appraisals and disciplinary procedures. Show less

• 

  Petrofac

  May 2021 - now

  Mechanical and Valve Engineer

  In my current position, I am the technical authority for mechanical valve engineering scopes for all of BP’s North Sea assets. My responsibilities include the following;• Technical review and approval of all new supply and repairs with regards to valves, actuators, instrumentation and any other auxiliary piping equipment. All equipment reviewed against company policies, procedures and technical documents / datasheets and industry standards.• Provision of support to maintenance engineers in the field with regards to all equipment issues, new supply, in field repairs and planned / unplanned maintenance.• Review, approval and implementation of risk-based assessments and inspections.• Assessing justifications for deviations and alternative recommendations for best solution and cost effectiveness. • Accessing, updating and utilising computer maintenance management systems (CMMS).• Quality insurance inspection and testing.• Manage, planning and scheduling of all relevant activities.• Rationalisation and approval of equipment repairs vs disposals for the North Sea region.• Instigation, support and approval of engineering management of change (EMOC).• Supporting shutdowns, TARS and providing emergent technical turnaround support. • Identify and realise efficiency improvement opportunities.• Provide functional input in the region to support BP Central Material Master improvement programme, bill of materials, stocking strategy, price booking, critical sparing strategy, preservation plan and inventory.• Stocking and disposals project review and approval. • Sharing best practice when undertaking all work scopes and that a high-quality output is delivered consistently.• Chair weekly / bi-weekly work progress meetings with the assets and equipment management contractors.• Support Contract Accountable Manager (CAM) and improve contract management for the provision of equipment management services. Show less