Raymond Lim, P.Eng.

Experience

• 

  Technoserve International Co., Inc.

  Jun 1990 - Dec 1990

  Equipment Engineer

  Applies relevant codes, industry standards, government regulations and client requirements for the design, and fabrication of pressure vessels, storage tanks and heat exchangers.Performs and checks mechanical design calculations of pressure vessels and heat exchangers using softwares (In-house Pressure Vessel Design Program and Heat Transfer Research Inc.) and manual methods.Prepares detailed design drawings of pressure vessels, storage tanks and heat exchangers. Performs squad check of vendor data and drawings from other disciplines.Reviews vendor data to ensure compliance with relevant codes, standards, regulations and client specifications.Utilizes vendor data and work with other disciplines to complete the engineering design.Performs shop and site visits to ensure successful execution of the engineering design. Show less

• 

  Sime Darby Pilipinas, Inc.

  Jan 1991 - Mar 1992

  Mechanical Engineer

  Prepares detailed design drawings of tire building, curing and testing equipment.Supervise fabrication, installation and commissioning of tire manufacturing equipment.

• 

  Parsons International Limited

  Apr 1992 - Jan 1996

  Lead Mechanical Engineer

  Applies relevant codes, industry standards, government regulations and client requirements for the design, fabrication and installation of mechanical equipment.Recruits, interviews and hires new Mechanical Engineers.Trains, supervises and leads a group of Mechanical Engineers for the execution of a project.Prepares schedules, estimates, progress reports and audit reports.Performs and checks mechanical design calculations of pressure vessels and heat exchangers using softwares (Compress and Heat Transfer Research Inc.) and manual methods.Prepares / reviews data sheets, material requisitions and technical bid evaluations for the procurement of mechanical equipment.Reviews piping nozzle loads against equipment nozzle loading requirements. Performs initial nozzle stress checking (i.e., nozzle reinforcement requirements – WRC 107/297) as required. Discuss and coordinate with Piping Design/Piping Stress Engineering and the vendor any nozzle loading issues and resolutions.Performs squad check of vendor data and drawings from other disciplines.Reviews vendor data to ensure compliance with relevant codes, standards, regulations and client specifications.Utilizes vendor data and work with other disciplines to complete the engineering design.Performs shop and site visits to ensure successful execution of the engineering design. Show less

• 

  Johnson & Johnson

  Feb 1996 - Mar 2007

  Leads supply management of consumer products:Performs general supervision of Supply Managers handling different brands of consumer products.Performs production planning, purchasing and inventory control for several major brands.Utilizes ERP/MRP softwares Mercia and SAP.Performs analysis of overall product cost as an input to the Business Planning Process.Acts as the Subject Matter Expert (SME) for the Forecast-to-Stock Process, where forecasts are converted into production orders and raw/packaging material orders considering leadtimes and inventory levels.Measures and analyzes performance in terms of fill rates, cycle times and inventory levels.Measures and analyzes performance of raw/packaging material suppliers and finished goods contract manufacturers.Coordinates with local, regional and global suppliers of finished goods and raw/packaging materials.Executes projects related to new product introduction:Performs cost and sourcing analyses.Coordinates with suppliers to ensure on-time delivery of raw and packaging materials.Coordinates with engineering and production to ensure equipment, personnel and processes are ready and within specifications.Ensures required inventory is ready prior to product launch.Leads cost reduction initiatives:Identifies cost drivers and opportunities for cost reduction.Performs pricing negotiations with key suppliers.Participates in the development of new suppliers.Leads Process Excellence teams as the Six Sigma Blackbelt:Leads Process Excellence teams working on projects related to improving productivity and efficiency, and reducing cycle times, waste and inventory.Utilizes the Define, Measure, Analyze, Innovative Improvement and Control (DMAIIC) framework to ensure process improvements are significant, repeatable and controllable. Show less Collaborates in the conceptualization, costing and feasibility studies for New Product Introduction, new Capital Investments and Continuous Improvement Projects.Leads implementation of projects related to the manufacture of new products and product improvements:Leads the design and engineering of processing and packaging machinery/facilities.Develops the project timelines, budget estimates and costing for machinery/facilities.Leads a team of multi-disciplinary engineers/designers/vendors/contractors to complete the machinery/facility design, including safety and ergonomic requirements.Establishes equipment specifications for purchasing and FAT.Leads vendor qualification and selection, obtains and evaluates proposals, awards purchase orders and contracts, monitors delivery or contract progress, monitors spending with respect to the approved budget.Supervises the fabrication, assembly, installation, commissioning and start-up of machinery and the required utilities and facilities.Communicates to key stakeholders regarding project progress, issues and opportunities.Ensures all start-up deficiencies are closed out and the equipment is ready for turn-over to production.Trains operators in the operation of the production line.Ensures the efficiency and productivity of the production line meets the product launch requirements.Provides technical support to production to implement process and product improvements.Prepares critical spare parts list to support the preventive maintenance program.Collaborates with the New Product Introduction task force and R&D for successful product development:Establishes the process parameters to meet R&D product specifications.Manages the production and procurement of required tools and equipment.Manages the production of samples in the Pilot Plant Facility.Collaborates with R&D to finalize product specifications for commercial production.Leads Process Excellence teams as the Six Sigma Blackbelt. Show less

  • Supply Manager

    Mar 2001 - Mar 2007

  • Project Manager

    Feb 1996 - Feb 2001
• 

  Jacobs Canada Inc.

  Apr 2007 - Sept 2012

  Lead Mechanical Engineer / Senior Mechanical Engineer

  Applies relevant codes, industry standards, government regulations and client requirements for the design, fabrication, registration and installation of mechanical equipment.Prepares / reviews specifications, schedules, estimates, progress reports and audit reports.Prepares / reviews sized and priced mechanical equipment lists.Performs and checks mechanical design calculations of pressure vessels using Compress.Prepares / reviews data sheets, material requisitions and technical bid evaluations for the procurement of mechanical equipment.Reviews piping nozzle loads against equipment nozzle loading requirements. Performs initial nozzle stress checking (i.e., nozzle reinforcement requirements – WRC 107/297) as required. Discuss and coordinate with Piping Design/Piping Stress Engineering and the vendor any nozzle loading issues and resolutions.Performs squad check of vendor data and drawings from other disciplines.Reviews vendor data to ensure compliance with relevant codes, standards, regulations and client specifications.Utilizes vendor data and work with other disciplines to complete the engineering design.Performs shop and site visits to ensure successful execution of the engineering design.Prepares / reviews construction work packages for installation of mechanical equipment.Assists construction with response to Request for Information (RFI).Performs project close-out activities (as-builting and red-lining). Show less

• 

  Devon Energy

  Oct 2012 - Aug 2015

  Mechanical Engineer

  Provides mechanical engineering support to the Devon Project Engineer / Manager.Collaborates with the EPCM during the Define and Execute phases. Reviews the quality of mechanical related work completed by the EPCM involved in the engineering and design of new facilities.Coordinates mechanical engineering activities within a Devon project to achieve the project’s scope, cost, and schedule and quality objectives.Works with internal key stakeholders and EPCM team to support the development of new facilities and to identify solutions to current operational issues.Ensures that work by the EPCM meets the project requirements and is executed in an orderly, logical fashion.Participates in scope, estimate and design reviews. Show less

• 

  Jacobs Canada Inc.

  Jun 2017 - Aug 2017

  Mechanical Engineer

  Performed and checked mechanical design calculations of pressure vessels using Compress.Prepared / reviewed data sheets, material requisitions and technical bid evaluations for the procurement of mechanical equipment.Performs squad check of vendor data and drawings from other disciplines.

• 

  ReVisionz Inc.

  Feb 2020 - Mar 2020

  Mechanical Engineering Subject Matter Expert (SME) - Engineering Design Tool (EDT) Specialist

  Create an inventory of Mechanical engineering and Mechanical data requirements standards. Work with the team members and business stakeholders to identify detailed Mechanical engineering deliverable and data requirements.Translate Mechanical engineering standards and data requirements into EDT tool configuration and deliverable template design guidelines.Review existing Mechanical engineering deliverables (Data sheets and Mechanical Equipment List) and identify gaps required to support EDT implementation, including engineering data mapping between deliverables.Identify gaps in existing Mechanical engineering processes and data requirements required to support EDT implementation.Effectively communicate findings to business stakeholders. Help develop standards and work instruction that will be used to implement and effectively use the EDT for Mechanical deliverable maintenance and production.Work with business analyst to identify and develop Mechanical engineering business processes related to Mechanical deliverables maintenance and production to support EDT implementation and change management.Development of EDT design specification used as the supporting artifact to setup and configure the EDT Mechanical solutionSupport the definition of test scenarios and scripts related to Mechanical deliverable production. Show less

• 

  ReVisionz Inc.

  Jan 2022 - now

  Master Data Analyst