Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSE

Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSE

System Integration Engineer

Followers of Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSE671 followers
location of Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSEJeddah, Makkah, Saudi Arabia

Connect with Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSE to Send Message

Connect

Connect with Ismail Alayoglu, (PhD. Scholar) PMP® CMRP® CEng MIRSE to Send Message

Connect
  • Timeline

  • About me

    Xrail Group Ltd şirketinde Deputy Project Engineering Manager (Railway Signalling Engineer)

  • Education

    • Eskişehir Osmangazi Üniversitesi

      2023 -
      Doctor of Philosophy - PhD Control Systems 3,71/4.00

      In January 2023, I started my PhD in control systems science. I am currently a thesis student in this program. I completed classes phase. All of them are passed successfully. Classes are Nonlinear Control Systems, Learning-Based Control, Introduction to Robotics, Control of Robotic Manipulators, Applied Computer Vision for Robotics, Machine Learning for Computer Vision Applications, The Scientific Research Methods and Its Ethics, and PhD Seminar. I am planning to pass PhD. Qualifying Exam then… Show more In January 2023, I started my PhD in control systems science. I am currently a thesis student in this program. I completed classes phase. All of them are passed successfully. Classes are Nonlinear Control Systems, Learning-Based Control, Introduction to Robotics, Control of Robotic Manipulators, Applied Computer Vision for Robotics, Machine Learning for Computer Vision Applications, The Scientific Research Methods and Its Ethics, and PhD Seminar. I am planning to pass PhD. Qualifying Exam then start my PhD. Thesis preparation soon. My thesis title will be "Optimization of Train Operation Using Deep Learning Methods." Show less

    • Eskişehir Osmangazi Üniversitesi

      2008 - 2013
      Bachelor's degree Electrical-Electronics Engineering 3.35/4.00

      My BSc. degree has been finished by the graduation project called “SCADA automation project in a flour factory”. In this project, Schneider Electric's SCADA software with name Vijeo Citect software has been used to follow the flour making process from the beginning to end.

    • Eskişehir Osmangazi Üniversitesi

      2013 - 2018
      Master's degree Telecommunication and Signal Processing 3,29/4.00

      Activities and Societies: Thesis with subject “Reliablity Analysis for Some Equipment Used in High-Speed Train Signalling System” has been finished. In this study, I have tried to estimate the lifetime of some fault equipment and equipment that causes significant train delays when it has a malfunction in the high-speed train signalling system. Article Yavuz, H. S., Alayoğlu, İ., 2021, Robust Reliability Assessment of High-Speed Railway Equipments Based on Small Sample Size, Sensors.

    • Kastamonu Üniversitesi

      2018 - 2019
      Master's degree Occupational Health and Safety 3,60/4.00

      Thesis with subject “Health & Safety For Installation Of High Speed Train Signalling Equipments” has been finished. In this study, health and safety risks that may be encountered in the installation of equipment in high-speed train projects and preventive measures related to these risks are included. Occupational health and safety rules, which must be applied by site personnel before, during and after the construction works. The rules specified in the study can be applied in the installation of… Show more Thesis with subject “Health & Safety For Installation Of High Speed Train Signalling Equipments” has been finished. In this study, health and safety risks that may be encountered in the installation of equipment in high-speed train projects and preventive measures related to these risks are included. Occupational health and safety rules, which must be applied by site personnel before, during and after the construction works. The rules specified in the study can be applied in the installation of signalling equipment on any high-speed train project site. Show less

  • Experience

    • Alcatel-Lucent Enterprise

      Jul 2013 - Nov 2015
      System Integration Engineer

      As a System Integration Engineer at subcontractor of China Railway Construction Corporation (CRCC) which was the main contractor of ERTMS Level 1 High-Speed Train Line Phase 2 Project between Ankara and Istanbul, my duties/tasks are listed below:- Collecting and submitting data of the construction works to Employer and its representative.- Getting the necessary work permits from traffic controllers and creating work orders.- Preparation of Quality Documents like Inspection Points Program, Data Register Sheets for indoor and outdoor installations.- Preparation and submitting of progress payment certifications between main contractor (CRCC), subcontractor (Alcatel-Lucent Teletas) and the Employer (TCDD).- Request for inspections if necessary and follow up the inspections with Employer and its representative.- Checking progress payment certifications submitted by Alcatel-Lucent Teletas’ subcontractors are compatible with the work done on the site.- Assuring that the quality is above the standards and workers obey the health and safety rules during the installations. Show less

    • Siemens

      Dec 2015 - Jan 2021
      Signalling Site Supervisor

      As a Signalling Site Supervisor at contractor side of ERTMS Level 2 High-Speed Train Line Project between Makkah and Madinah, my duties/tasks are listed below:- Getting the necessary work permits from traffic controllers.- Ensuring the coordination of the teams.- Supervising the installation of the following trackside equipment:1. Signage2. Eurobalise3. Axle Counter4. Wayside Signal5. Point Machine (MD2000 and L826H)6. Track Circuit- Internal adjustments of Axle Counters, Wayside Signals, Track Circuits and Point Machines.- Programming, verification and supervision of Eurobalises.- Supervising the installation of the following indoor interlocking cabinets:1. Westrace2. Auxiliary3. Power Distribution Cabinet (PDC)4. Radio Block Center (RBC)5. Communication (COMMS)6. Juridical Record Unit (JRU)7. Axle Counter Evaluator (ACE) Diagnosis8. Axle Counter Evaluator (ACE)9. Track Circuit- For indoor cubicle installations: placement and fixation of cabinets, earthing of cabinets and external cables, interconnection and network cabling, termination of external signalling cables.- The tests and commissioning of signalling equipment installed both indoor and outdoor.- Assuring that the quality is above the standards and workers obey the health and safety rules during the installations.- Preparing installation reports, request for inspections if necessary and follow up the inspections with Employer and its representative.- Preparation of Quality Documents like Inspection Points Program, Data Register Sheets for indoor and outdoor installations.- Supporting Maintenance Team at failures to recover problems. Show less

    • TCDD Teknik Mühendislik ve Müşavirlik A.Ş.

      Jan 2021 - Apr 2023
      Project Manager

      As a Project Manager at contractor side of ERTMS Level 1 High-Speed Train Line between Gebze-Köseköy, my duties/tasks are listed below:- Administrative and technical management of the project. Creating the necessary material purchase requests, making official correspondence, conducting technical interviews with candidates etc.- Providing technical trainings to staff about Signalling Systems, Telecommunication Systems, CTC Control Center Systems and Sub-Systems' maintenance works,- Preparation and submitting of official technical specifications documents between main contractor (TCDD Technical), and the Employer (TCDD).- Ensuring the coordination of the teams.- Collecting and submitting data of the maintenance works to Employer.- Preparation and submitting of progress payment certifications to Employer (TCDD).- Checking progress payment certifications submitted by TCDD Technical’s subcontractors are compatible with the work done on the site.Project: The Preparation of Railway Signalling Action Plan-Process Follow-up Leader- A holistic and inclusive signalling action plan is preparing for TCDD railway network signalling systems for purposes such as improving operational safety on TCDD railway lines, reducing travel times, increasing traffic safety, using existing line capacities effectively and efficiently, increasing mobility and using local resources and opportunities in signalling more effectively.- In this context, Railway Signalling Action Plan, which takes into account the new developments in the country and in the world, will be prepared with the participation of wide stakeholders in order to be a roadmap for the studies to be carried out on railway signalling in the short, medium and long term, and the necessary strategies and methods will be revealed. Show less

    • Xrail Group Ltd

      Apr 2023 - now
      Deputy Engineering Manager

      As a Deputy Engineering Manager at sub-contractor side of ERTMS Level 2 High-Speed Train Line between Makkah and Madinah, my duties/tasks are listed below:- Providing technical trainings to staff about Signalling Systems and Sub-Systems' maintenance works,- Ensuring the coordination of the teams.- Getting the necessary work permits from traffic controllers or work foreman in charges as Work Foreman.- Handling catenary electricty power shutdown duties as Authorised Person.- Supporting Maintenance Team at failures to recover problems.- Supervising the preventive maintenance of the following trackside equipment:1. Signage2. Eurobalise3. Axle Counter4. Wayside Signal5. Point Machine (MD2000 and L826H)6. Track Circuit- Supervising the preventive maintenance of the following indoor interlocking cabinets:1. Westrace2. Auxiliary3. Power Distribution Cabinet (PDC)4. Radio Block Center (RBC)5. Communication (COMMS)6. Juridical Record Unit (JRU)7. Axle Counter Evaluator (ACE) Diagnosis8. Axle Counter Evaluator (ACE)9. Track Circuit- Collecting and submitting data of the maintenance works to the Contractor (Siemens Rail Automation S.A.U.).- Assuring that the quality is above the standards and workers obey the health and safety rules during the maintenance. Show less

  • Licenses & Certifications

    • Scaffolding Safety

      Gulf Certified Engineers
      Jun 2025
    • 30-Hour - General Industry Safety OSHA

      National Association Of Safety Professionals
      Jun 2025
    • HHR Authorised Person Qualification

      ADIF
      Sept 2023
    • Occupational Health & Safety Specialist Certificate (Class B)

      T.C. Çalışma ve Sosyal Güvenlik Bakanlığı
      Dec 2020
    • Work at Height Safety

      Expert Trainers Academy
      Jun 2025
    • HHR Work Foreman Qualification

      ADIF
      Aug 2023
    • Project Management Professional (PMP)®

      Project Management Institute
      Feb 2025
      View certificate certificate
    • Work Permit System

      Expert Trainers Academy
      Jun 2025
    • CMRP Certified

      SMRP
      Jan 2025
      View certificate certificate
    • Personal Protective Equipment Safety

      Expert Trainers Academy
      Jun 2025