Jibin Anirudhan

Experience

• 

  Jobby Engineers Pvt Ltd.

  Sept 2011 - Jan 2014

  QC Engineer

  • Implementation of approved procedures, WPS, ITP and maintaining quality records as per quality management system requirement• Preparation of daily weld visual report.• Conduct dimensional inspection at site. • Tracing the heat numbers and materials.• Fit-up and visual inspection of weld.• Coordination with the field subcontractors and the third party NDT inspection company.• Preparing line history sheet and punched list clearing with client.• Ensure implementation of HSE policy and HSE plan within the area of their jurisdiction. Show less

• 

  Leeds International General Contracting

  Mar 2014 - May 2016

  QC Engineer

  • Implementation and monitoring of quality control plan and work instructions.• Conduct all stage-wise inspection as per approved ITP with Client, Owner & consultant. • Perform material as well as work inspection and ensure that inspection and tests are carried out as per the approved ITP and approved procedures. • Review material test certificates, inspection and test reports and manufacturers data record. • Witness welder qualification test (WQT), pressure test, PMI and PWHT in association with the client representative. • Ensure calibration and maintain calibration records for inspection, measuring and test equipment for the company, project and that of the subcontractors.• Witness NDT activities and review of RT films.• Inspect lines in accordance with P & ID & isometric drawings for mechanical clearance.• Supervising and Monitoring of cathodic protection works for pipelines.• Supervising coating repair activities.• Checking daily weather condition, temperature and humidity prior to start of blasting and painting.• Carrying out pre blasting inspection and ensuring adherence to the specification.• Visual inspection and reporting of surface preparation.• Witnessing and ensuring Paint Mixing as per TDS/PDS.• Inspection and reporting of painting activities. Continuous monitoring is ensured after each coat of paint.• Defect identification and rectification as per approved specification.• Maintaining records for calibration of measuring & monitoring devices pertaining to blasting and painting works.• Monitoring daily temperature log book and paint store room temperature.• Performing and reporting holiday test and Adhesion pull-off test.• Prepare daily work schedule, inspection reports, weekly QA/QC reports and repairing status.• Having Knowledge of ISO, API, ASME standards.• Manpower management and review interim and final documentation. Show less

• 

  DASH Inspectorate Inspection Services

  Jun 2016 - Dec 2016

  QC Engineer

  • Implement the QA/QC management system at site.• Coordinate quality inspections with client and all the site sub-contractors. • Coordinate all receipt inspections.• Distribute relevant QA/QC documentation to site subcontractors• Verify that the quality related site activities are in accordance with the applicable codes and standards.• Liaise with third party inspection agencies, NDT subcontractors and external labs for inspection, testing and audits.• Ensure all quality control documentation is compiled and competed for as-built hand over through the QC turnover engineer.• Preparation of test packages for pneumatic test and hydrostatic tests.• Control all nonconformance reports and undertake remedial action.• Review the client specification and undertake relevant training to the site QC inspector.• Carrying out line walk down inspection with client and punch clearance.• Witnessing all allied painting activities.• Coordinate with the site construction manager on all quality issues. • Coordinate and chair the QA/QC site weekly meetings with the projects subcontractors QC personnel• Preparation of project quality book as per client requirements.• Carry out Internal Audit as scheduled in the Project Quality Plan.• Ensure the safety is adhered to at site Show less

• 

  INCO Group Of Companies

  Apr 2017 - Jul 2021

  • Monitor the implementation all stage-wise inspection as per approved ITP with Client, Owner & consultant. • Distribute relevant QA/QC documentation to site subcontractors.• Liaise with third party inspection agencies, NDT subcontractors and external labs for inspection, testing and audits.• Ensure all quality control documentation is compiled and competed for as-built hand over through the QC turnover engineer.• Preparation of test packages for pneumatic and hydrostatic tests.• Review the client specification and undertake relevant training to the site QC inspector.• Managing and monitoring non-conformance (NCR).• Monitoring of installations of Static and Rotating equipment.• Examining all internal and external surfaces of pressure vessels, column and exchangers for evidence of corrosion, pitting, cracking, leakage, bulges, defects in metal plate, lamination, deformation, alignment and mechanical damage.• Examining all manways and nozzles for mechanical damages and other defects.• Examining verticality, orientation and alignment of vessels, column, exchangers, absorbers and flares.• Ensuring all structural installations are installed as per drawings.• Inspection and reporting of painting activities. Continuous monitoring is ensured after each coat of paint. Show less • Monitor the implementation of the approved site QC Plan.• Assure all technical documents relative to site quality control are current status.• Preparation of Inspection Test Plan (ITP) & Quality Procedures for Piping, Painting & Sandblasting, Structural & Static Equipment. • Knowledge of GTAW, SMAW, FCAW and SAW of different materials such as CS, SS, Alloy steel, Inconel and Duplex steels.• Witnessing of Non-Destructive Testing and reviewing the NDT (PAUT, RT, UT, MT, PT, and PWHT) reports for Boiler Module, HRSG and Steel Structure.• To adhere to ASME quality procedures. To assist maintenance of ASME documentation and arranging ASME & National Board external audit and coordinate with auditors.• Reporting to QA/QC Manager on quality matters and inspections done.• Managing and monitoring non-conformance (NCR). Show less

  • QA/QC Engineer

    May 2019 - Jul 2021

  • QA/QC Engineer

    Apr 2017 - May 2019
• 

  Alhaditha Petrolum Services Comapany

  Sept 2021 - Sept 2023

  QC Inspector

  • Liaising with client, other departments and subcontractors for the smooth functioning of QA/QC activities• Reporting to the QA/QC Manager and ensure that all inspection of welding, painting and mechanical activities are performed as per specification and international standards.• Monitoring visual, in-process and final inspection activities at different stages as per approved procedures. • Review of incoming project materials.• Visual inspection and documentation as per project specification and standard.• Coordinating NDT team and review of NDE reports.• Carrying out line walkdown and witnessing pressure test.• Witnessing of Tie-in and Hook-up installations.• Visual inspection of coating and painting as per QCP/ITP & accept as per acceptance criteria.• Densyl wrapping for underground piping and road crossing section.• Managing and monitoring non-conformance (NCR).• Preparation of test packages and mechanical completion dossier. Show less

• 

  Arabian Industries Projects LLC

  Nov 2023 - Jul 2024

  QA/QC Inspector

  • Liaising with client, other departments and subcontractors for the smooth functioning of QA/QC activities• Reporting to the QA Engineer and ensuring that all inspection of welding, painting and mechanical activities are performed as per specification and international standards.• Monitoring visual, in-process and final inspection activities at different stages as per approved procedures. • Visual inspection and documentation as per project specification and standard.• Coordinating NDT team and review of NDE reports.• Carrying out line walkdown and witnessing pressure test.• Witnessing of Tie-in and Hook-up installations.• Visual inspection of coating and painting as per QCP/ITP & accept as per acceptance criteria.• Managing and monitoring non-conformance (NCR).• Preparation of test packages and mechanical completion dossier. Show less

• 

  Galfar Engineering & Contracting SAOG

  Jul 2024 - now

  QA/QC Engineer

  · Preparation, implementation, monitoring and updating the CQP, ITP & QCP.· Ensuring all works are carried out as per latest revision of approved documents.· Attending weekly and monthly meetings with clients and head office.· Preparation of weekly and monthly reports and ensuring necessary KPI are met.· Assisting the project team in creating TQ and concessions.· Coordinating internal and external audit.· Solving welding related issues with the guidance of a welding engineer.· Direct and monitor all QC inspectors to fulfil all inspection requirements as per CQP, purchase order and other contract requirements.· Review the calibration records for measuring and monitoring equipment used in the project.· Monitor the performance of subcontractors and approve the quality related documents.· Coordinate with the corporate QAQC Manager for implementation of QMS. Show less