Niraj Srivastav

Experience

• 

  ACQURATE ENGITECH LIMITED

  Jul 2010 - Apr 2011

  Asst. Trainee Engineer

  • Carried out visual inspection of pipe spool & fittings without damage and with proper handling storage preservation as per manufacturer standard and Saudi Aramco standard procedure.• Checking of vital Fabrication points and attending irregularities if any.• Check latest year & revisions of specifications isometric drawings• Make daily RFI Log and Piping fit-up summary report.• Prepare reports at all inspection conduct at the site and maintain the Quality Control Documentations.• Conducting inspection as per Inspection Test Plan with approved Drawing/project specification.• Ensure satisfactory identification of materials, proper protection of piping and fittings.• Ensure the pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe Supports details.• Dimensional checking of correct method of cutting, beveling, edge preparation fit-up and alignment as per standard prior to welding• Verify and ensure that correct materials are utilized for all works. Show less

• 

  EVERSENDAI CONSTRUCTION PRIVATE LIMITED

  May 2011 - Mar 2012

  QA/QC Supervisor

  • Dimensional checking of correct method of cutting, beveling, edge preparation fit-up and alignment as per standard prior to welding• Verify and ensure that correct materials are utilized for all works.• Review and ensure all drawings/P&IDs are AFC Stamp and latest revision.• Ensure spool fabrication & Erection as per the Isometric drawing • Ensure the co-ordinate of erection spool is as per Isometric drawing.• Checking of correct routing of lines as per isometric drawing and “AS BUILTING”• Implement the quality control inspection stages with respect to ITP (Witness, Hold, Surveillance and Review)• Internal cleaning inspection prior to startup of pre assembly and fit up. • Undertaking the mechanical clearance of piping system.• Co-ordinate with client inspector for final inspections for hold and witness point inspection.• Prepare detailed records and reports at all inspection conduct at the site and maintain the Quality control Documentations.• Preparation and monitoring of Non-Conformance reports (NCR) • Preparing & maintaining various QA/QC documents and final test Packages• Witnessing NDT such PT, RT, MPI and pressure test such as air leak test and hydro test.• Ensuring that the repairs are carried out with approved Procedure and review its NDT records for its acceptance.• PWHT reports review as per the project specification• Prepare hydro test package line check & punch listing (“A” and “B”)• Verify all the calibration certificates for the pressure gauges, pressure relief valve, Hydro test manifolds, temperature gauges, pressure recorders that involved in the pressure testing. Verifying the water analysis report before filling the water.• Line checking of AG system and prepared punch list to verify the overall completeness of piping, verify the standard piping supports, alignments, traceability of material, flow direction of valve, orientation. As per isometric drawing & PID for Pressure testing. Show less

• 

  Larsen & Toubro

  Apr 2012 - Jan 2014

  QA/QC Supervisor

  • Supervising Receiving inspection of materials & equipment’s for all the projects.• Assist / promote contractors / vendors and the company to develop Quality systems and contract Quality documents.• Ensure that Quality systems, procedures are implemented and maintained as per ISO procedures and job procedures.• Managing the overall material control for the various projects in coordination with material control group and clarifying the Technical issues questioned by client and third-party during the fabrication stage.• Review and approval of Contractor requisition and before processing & Review of Test Certificates for the Procured material and verify for the compliance to the requirements. Observations are recorded and the Contractor is advised of additional testing of the material for Compliance to the required Standards and Specifications• Verification of dimensions of on fabricated jobs as per technical specifications and drawings• Co-ordination with HSE teams to full-fill the HSE requirements• Co-ordination with planning team for job planning & material requirements• Progress Reporting & Attending the Daily progress meeting with clients & sub-contractors• Implement the quality control inspection stages with respect to ITP (Witness, Hold, Surveillance and Review)• Internal cleaning inspection prior to startup of pre assembly and fit up. • Undertaking the mechanical clearance of piping system.• Co-ordinate with client inspector for final inspections for hold and witness point inspection.• Prepare detailed records and reports at all inspection conduct at the site and maintain the Quality control Documentations.• Preparation and monitoring of Non-Conformance reports (NCR) • Preparing & maintaining various QA/QC documents and final test Packages• Witnessing NDT such PT, RT, MPI and pressure test such as air leak test and hydro test.• Ensuring that the repairs are carried out with approved Procedure and review its NDT records for its acceptance. Show less

• 

  LARSEN & TOUBRO LIMITED - QATAR

  Jan 2014 - Apr 2015

  QC Engineer

  • Prepare reports at all inspection conduct at the site and maintain the Quality Control Documentations.• Conducting inspection as per Inspection Test Plan with approved Drawing/project specification.• Verify all the calibration certificates for the pressure gauges, pressure relief valve, Hydro test manifolds, temperature gauges, pressure recorders that involved in the pressure testing. Verifying the water analysis report before filling the water.• Line checking of AG system and prepared punch list to verify the overall completeness of piping, verify the standard piping supports, alignments, traceability of material, flow direction of valve, orientation. As per isometric drawing & PID for Pressure testing.• Reviewing packages ready for Hydro test, line inspection with the client, conducting Hydro test, flushing and drying Inspection of gaskets supports valves prior to line reinstatement acceptance as per the latest drawing• Closing of packages by clearing all punches and prepares packages ready for pre-commissioning.• Final reinstatement inspection for mechanical completion and piping completion to handover• Monitoring the QA/QC Documentation of the subcontractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements.• Assist / promote contractors / vendors and the company to develop Quality systems and contract Quality documents.• Ensure that Quality systems, procedures are implemented and maintained as per ISO procedures and job procedures.• Managing the overall material control for the various projects in coordination with material control group and clarifying the Technical issues questioned by client and third-party during the fabrication stage.• Review and approval of Contractor requisition and before processing & Review of Test Certificates for the Procured material and verify for the compliance to the requirements. Show less

• 

  Petron Gulf LLC

  Sept 2015 - Jan 2017

  QC Inspector

  •Checking of vital Fabrication points and attending irregularities if any •General observation for any irregularity in the process •Inspection of incoming materials and checking mill test certificates (MTC) for that•Performed material inspection, consumable inspection check equipment and accessories •Reviewed method statement and Inspection Test Plan with respect to project specification.•Carried out Inspection activities in accordance with Inspection and Test Plan.• Ensure satisfactory identification of materials, proper protection of piping and fittings. Verify proper size and schedule of pipe, proper rating and face of flanges.• Ensure that pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe supports details.•Checking the day to day fabrication works and the quality of work going on the site. Inspection of material receives for any irregularities.•Checking joint Fit up groove angle, type of groove root gap to rectify any mismatch, as per requirement of approved ITP. •Checking of pipe support at Fit-up and welding stage, Preparation the reports for review.•Identification and reviewing the certificates of incoming spools and material such as pipe and fittings.•Reviewing the Isometric drawing, P&ID & GAD.•Ensure spool fabrication & Erection as per the Isometric drawing •Maintain a record for all inspection points relevant to quality.• Preparation and monitoring of Non-Conformance reports (NCR) • Ensuring that the repairs are carried out with approved procedure and review its NDT records for its acceptance,• Inspection of fabrication, welding and installation of piping system to ensure the quality of job meet the requirements Project of the specification and applicable standards. Preparation of inspection reports and documentation and NDT review.• Review the PWHT reports as per the project specification• Monitor the work progress and ensure uniformity and consistency in the applicatio Show less

• 

  NCC (AL-REZAYAT GROUP) KSA

  May 2017 - Aug 2020

  QC Inspector

  • Performing the material receiving inspection of piping materials• Inspection of incoming materials and checking mill test certificates (MTC).• Reviewing of QC documents method statements, ITP, QCP, and PQP as per construction code, project scope and client Specification.• Carried out visual inspection of pipe spool & fittings without damage and with proper handling storage preservation as per manufacturer standard and Saudi Aramco standard procedure.• Checking of vital Fabrication points and attending irregularities if any.• Check latest year & revisions of specifications isometric drawings• Make daily RFI Log and Piping fit-up summary report.• Prepare reports at all inspection conduct at the site and maintain the Quality Control Documentations.• Conducting inspection as per Inspection Test Plan with approved Drawing/project specification.• Ensure satisfactory identification of materials, proper protection of piping and fittings.• Ensure the pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe Supports details.• Dimensional checking of correct method of cutting, beveling, edge preparation fit-up and alignment as per standard prior to welding• Prepare detailed records and reports at all inspection conduct at the site and maintain the Quality control Documentations.• Preparation and monitoring of Non-Conformance reports (NCR) • Preparing & maintaining various QA/QC documents and final test Packages• Reviewing packages ready for Hydro test, line inspection with the client, conducting Hydro test, flushing and drying Inspection of gaskets supports valves prior to line reinstatement acceptance as per the latest drawing.• Final reinstatement inspection for mechanical completion and piping completion to handover• Monitoring the QA/QC Documentation of the subcontractors and ensure that all the activities are incorporated to their system on daily basis and can be traced according to our requirements. Show less

• 

  International Certification Services Pvt. Ltd.

  Jan 2021 - Dec 2022

  TPI (Third Party Inspector)

  • Preparation and Review of WPS, EQT, WQT and PQR.• Preparation and Review of all Procedure.• Preparation and Review of all Documentation.• Preparation and Review of Pipe Book Part-A, Part-B, Part-C.• Preparation and Review of Material Reconciliation & leader sheet.• Interpretation of Radiography film as per API 1104.• Conducting of Pre-Hydro test and Final Hydro test• Ensuring Implementation of Quality Control Plan, Procedure and Inspection test Plan.• Coordination with the client/consultants to maintain the Quality of the Project.• Familiar with ASME, API, ASTM, standard/procedures, and Co-ordinate QA/QC activities.• Preparation of relevant Quality document.• Preparing specific procedure, NDT reports, Inspection of piping and pipeline.• Dealing with Client in all issues related to Quality and Production.• Preparation and Submission of RA Bills & Final Bills as per Contract SOR to Client• Implement the quality control inspection stages with respect to ITP (Witness, Hold, Surveillance and Review)• Internal cleaning inspection prior to startup of pre assembly and fit up. • Undertaking the mechanical clearance of piping system.• Co-ordinate with client inspector for final inspections for hold and witness point inspection.• Prepare detailed records and reports at all inspection conduct at the site and maintain the Quality control Documentations.• Preparation and monitoring of Non-Conformance reports (NCR) • Preparing & maintaining various QA/QC documents and final test Packages• Witnessing NDT such PT, RT, MPI and pressure test such as leak test and hydro test. Show less

• 

  Samsung C&T Corporation

  Jan 2023 - now

  QC Supervisor Piping

  ● Performing the material receiving inspection of piping materials● Inspection of incoming materials and checking mill test certificates (MTC).● Reviewing of QC documents method statements, ITP, QCP, and PQP as per construction code, project scope and client Specification.● Carried out visual inspection of pipe spool & fittings without damage and with proper handling storage preservation as per manufacturer standard and Saudi Aramco standard procedure.● Checking of vital Fabrication points and attending irregularities if any.● Check latest year & revisions of specifications isometric drawings● Make daily RFI Log and Piping fit-up summary report.● Prepare reports at all inspection conduct at the site and maintain the Quality Control Documentations.● Conducting inspection as per Inspection Test Plan with approved Drawing/project specification.● Ensure satisfactory identification of materials, proper protection of piping and fittings.● Ensure the pipe supports, hangers and guides have been installed in accordance with the piping drawings and the pipe Supports details.● Dimensional checking of correct method of cutting, beveling, edge preparation fit-up and alignment as per standard prior to welding● Verify and ensure that correct materials are utilized for all works.● Review and ensure all drawings/P&IDs are AFC Stamp and latest revision.● Ensure spool fabrication & Erection as per the Isometric drawing ● Ensure the co-ordinate of erection spool is as per Isometric drawing.● Checking of correct routing of lines as per isometric drawing and “AS BUILTING”● Implement the quality control inspection stages with respect to ITP (Witness, Hold, Surveillance and Review)● Internal cleaning inspection prior to startup of pre assembly and fit up. ● Undertaking the mechanical clearance of piping system.● Co-ordinate with client inspector for final inspections for hold and witness point inspection.● Prepare detailed records and reports at all inspection Show less