Daniel Patterson

Experience

• 

  Bowey Homes Ltd

  Sept 2003 - May 2005

  Labourer

  I worked as part of a team to ensure cleanliness and safety of the building site, making sure all materials and tools were available to the tradesmen to complete their jobs.

• 

  Royal Navy

  Jun 2005 - Mar 2012

  Harbour and Sea Watchkeeping, Maintenance (planned/routine) and Defect Rectification of all systems on board, including:- • Main engines (pielstick pc12) and relating auxiliary systems •Diesel generators (ruston) •Main engine control system•Clutch control system•High pressure air compressor/systems (280 bar)•Medium pressure air compressors/system (30 bar)•Low pressure air compressors/system (6 bar)•Oily water separators •Fuel separator/oil separators •Bulk Fluids(Diesel, Oil, Aviation Fuel, Fresh Water, Waste)•Plummer blocks/shaft line •Refrigeration •Fridge system•Air conditioning plants/chilled water systems•Reverse osmosis plants•Aerobic treatment plant/sewage system•High pressure salt water pumps/system (fire main)•Steering gear•Stabiliser•Sirens•ISIS/MCAS•Vibration analysis/MIMIC manager on board•Cathodic protection•115v, 240v, 440v electrical systems Show less After successfully completing basic training and engineering courses, I served aboard the largest vessel in the Royal Naval fleet. During my time as an Engineer onboard my duties where to operate main and auxiliary machinery from local and remote positions. Carry out watchkeeping duties at sea and in harbour. Carry out mechanical and electrical maintenance (planned/routine) and defect rectification as a team or individual. Comply with all safety precautions and procedures, with use of test equipment, technical publications/drawings and tools. Also carry out ships firefighting duties and whole ship routines and evolutions. During the ships maintenance period I carried out the overhaul of steering systems, stabiliser systems, medium and low pressure air systems, liaising with contractors and ships staff to get my part of the project completed on time. After completion of the maintenance period and successful trials, the ship deployed to the Far East. During my time on HMS Ocean I was also deployed to Norway, the Caribbean and Africa for periods of 1- 6 months. Also completing a successful secondment with the Royal Marines to offer my mechanical skill and knowledge to inspect, service and maintain all vehicles/plant machinery and marine craft in their fleet. Carrying out all planned and routine maintenance alongside defect rectification, to keep the fleet operational. Throughout all roles I provided technical advice, support and training to senior and junior personnel when needed/asked. As a senior engineer I supervised junior and trainee engineers as required. Show less

  • Marine Engineering

    Jun 2005 - Mar 2012

  • Marine Engineering Mechanic (Marine Mechanics/Hydraulics)

    Jun 2005 - Mar 2012
• 

  TSC Offshore Group

  Jun 2012 - Nov 2013

  Field Service Technician (Mechanical/Hydraulic)

  Working alongside a small service team, I was responsible for maintenance, upgrades and repairs of equipment to a number of clientele worldwide. During my time I worked offshore repairing and upgrading pipe handling cranes alongside electrical team. Working on projects in Egypt/Canary Islands for major overhauls of TSC equipment, including BOP Cranes, BOP mechanical handling systems and CTU systems onboard. Completing pre-project surveys, then following though to completing projects, where I supervised and helped with the major overhaul of BOP handling systems, pipe handling systems and riser gantry crane/associated systems. Working alongside rig crews to successfully complete heavy lifts of cranes from rig to quayside workshops. Compiling with all safety precautions and procedures, with use of test equipment, technical publications/drawings and tools. Assisting in UK workshop to mechanically and hydraulically outfitted TSC’s equipment (riser systems and winches). Once completed, carrying out function and load testing using a range of methods before equipment was sent to the client. Liaising with the engineers and project managers to complete the work correctly and on time. Supervising and guiding junior and trainee engineers on all major jobs. Show less

• 

  National Oilwell Varco

  Nov 2013 - Jun 2018

  Mechanical Service Engineer

  After completing NOV's technical college and product familiarization, I work within the Pressure Control Equipment(PCE) service team. Working worldwide to overhaul, fault finding, repair, upgrade, commission and test, 4th and 5th generation subsea BOP stacks, MUX control systems, surface BOP stacks, Koomey control systems, motion compensation systems and riser systems. Working on 22”/14"Poslock operators to complete field overhauls, which include full stripdown, inspection, fitting of all wear components(seals/bushings etc.), reassembly and function test/setup. Completing upgrade projects consisting of installation and commissioning of an EHBS systems, ROV systems and various stack related components.Supervising major overhaul of riser and telescopic joints, which included stripdown, inspect, repair, test/pressure test and reassembly.Working to API regulation and specification, to complete work in a timely and effective manner above and beyond satisfaction of supervisors and clientele.Completion of detailed service and damage reports along with all other relevant paperwork before, during and after jobs. Supervising and guiding junior and trainee engineers when required. Conducting onsite training to NOV and customer personnel as necessary and upon request. Show less

• 

  Trendsetter Engineering, Inc.

  Jan 2019 - now

  Successfully managed multiple subsea projects with budgets ranging up to 100mm, ensuring timely delivery and compliance with industry standards. Develops comprehensive project plans that outline scope, timelines, resource allocation, and budget requirements. Led cross-functional teams, including engineering, procurement, and manufacturing/fabrication, to achieve project milestones and objectives. Acted as the primary liaison between clients and stakeholders, providing regular updates and addressing any concerns throughout the project lifecycle. Conduct risk assessments and develop mitigation strategies to minimize project disruptions and ensure safety compliance. Foster a culture of collaboration and innovation among team members, resulting in improved project outcomes and team performance. Show less Responsible for supporting Project Managers in all aspects of the project including but not limited to, tender/bid, initial set-up, planning, execution and close-out.Effectively developed and deployed manufacturing execution plans for projects to successful delivery per contract. Worked successfully with company departments (e.g., Engineering, Operations, Sales, and Senior Management) to support and complete assigned projects on-time and within/or under budget.Ensure that project requirements, schedule and budgets are set prior to the start of all projects, and change management controls are used as needed. Planned, managed, coordinated, and tracked progress of assigned projects by utilising schedules and financial performance data to deliver a quality on-time service that meets or exceeds customer requirements. Supported project managers with key project activities such as kick offs and project meetings, project reporting, logistical and invoice support as well as schedule related status updates especially attaining to critical path. Maintain project document controls for all project management processes and documentation (MDR, VOR, BOM, Risk Register, Logistics, Schedules, etc). Update Management and/or Project Manager on status, risks and issues on assigned projects as needed. Show less Responsible for the oversight of daily operations within TEI's assembly and testing facility, supervising complex subsea equipment operations. Managing approximately 10-20 direct reports at any onetime within the Manufacturing Technician pool, and any sub-contracted labor that is on-site. Worked to promote and implement a safe working environment by the means of safety procedures and regulations. Build and update production schedule to maximize productivity.Gather and organized data relating to KPRs for shop activity. Participated in audits as needed(ISO, Vendor, etc.). Show less Responsible for all logistical operations and oversight of logistics staff. Ensuring all inventory received correctly and transferred promptly to QC receiving inspection. Organizing and tracking all domestic and international shipments, outbound and inbound too TEI with constant communication with vendors and fright forwarders. Liaising with projects teams and workshop staff to ensure the correct staging/kitting of parts for assembly operations. Scheduling outside vendors to crate and package outbound equipment according to mode of transport/destination. Responsible for the upkeep of the warehouse ERP. Show less Working within the manufacturing team on the shop floor, to execute major projects from initial assembly planning phase through to customer witness and shipment. Working with Trendsetter standard product lines and assuming responsibility for ad-hoc projects. Supporting project team to lead projects on shop floor. Executing on multiple projects, meeting tight deadlines outlined by project management. Effectively managing time, prioritizing tasks, and delegating work to team. Completing NCR’s as required from initial report to executing engineering/quality dispositions. Conducting assembly, testing and inspection of parts as per engineering drawing/procedures. Liaising with project coordinators, project managers and project engineers to obtain redlines, engineering changes and product information as required. Ensuring all traceability is tracked throughout the manufacturing process on the shop floor. Communicating with shipping/receiving for release of parts to shop for assembly. Communicating with workshop coordinator for any special tooling required for each project. Proactively taking opportunities to mentor and coach colleagues where necessary. Actively participating with workshop safety culture. Show less

  • Project Manager

    Jun 2023 - now

  • Project Control Specialist

    Jan 2022 - Jun 2023

  • Shop Foreman

    May 2020 - Jan 2022

  • Shipping Receiving Lead

    Nov 2019 - May 2020

  • Subsea Technician

    Jan 2019 - Nov 2019