Thanh Binh

Experience

• 

  Doosan VINA - Factory

  Aug 2008 - May 2013

  Quality Control Inspector

  WORK EXPERIENCEFrom: Aug.2008 ~ May.2013Company: Doosan Vina Industries Viet Nam.Location: Dung Quat Economic, Zone Binh Thuan Commune, Binh Son District, Quang Ngai Province.Email: dvhr@doosan.com. Tel : 0553. 618900Position: QC InspectorWork Scope: - I’m working as Quality Assurance team Quality Control inspector-QA/QC of Chemical Process Equipment(Tank , pressure vessel , pipe…)- General control QC job when start to finished Project: * From: Nov-2008 to Mar-2009- Power construction electric PCC2 – Branch 5 / Project : Dung Quat Refinery - Duties (Main Contractor inspector): Welding inspector, Electric inspector, review as built documents. * Duties:- Preparing report for inspection (Progress and Final report)- Make tabulation of material (TOM) with find out material test record(MTR) In addition, I take part the training course about: ISO 9001:2008 Design and Manufacture of Boilers, Pressure Vessels, and Heat Exchangers and its Auxiliary Epuipment, Steel Structuers, Tanks and Piping Assemblies, ASME Codes… Manufacture of Pressure Vessels Show less

• 

  HIAP SENG ENGINEERING LTD

  May 2012 - Jul 2012

  Engineering Supervisor- 1st Turnaround Maintenance Planner at Binh Son Refinery and Petrochemical

  - Supervising, checking and repair Valves, Heat Exchangers and Tower installation base on procedure, installation manual and ITP - Arrange the time, equipment tool and manpower for participated in field problemstroubleshooting in shoutdown time of Planner. Inspection with Contractor and Owner. - Preparation and do leakage test for valves, hydrostatic test for Valve heat exchangers - Daily report, weekly report and monthly report to Site Manager and Head Office. Show less

• 

  Doosan VINA - Site

  Jul 2013 - Apr 2014

  QA/QC Inspector

  - As per ITP, Procedure or Manual installation, make QC document and take care assemblies, inspection and control welding Piping Turbine and equipment. - Internal inspection before issue offical inspection with Contractor and Owner - Manage drawing, QC document - Daily report, weekly report and monthly report to Site Manager

• 

  Hiap Seng Engineering (Thailand)

  May 2014 - Aug 2014

  Supervisor-1st-2nd &4th Turnaround Maintenance Planner

   Reviewed work packs, planning packages, and tracked work progress. Executed DCSM phase for RFCC, AF00. Prepared working conditions, PTW, and handled repair and maintenance for reactors, valves, heat exchangers, columns, and refractory based on schedule. Supervised and controlled the work progress of DCSM contractor to meet the overall schedule; checked, removed, repaired, and reinstalled equipment based on procedures, installation manuals, technical documents, and ITP. Ensured the quality of DCSM contractor work and coordinated with DCSM contractor and NSRP for material preparation, equipment arrangement, manpower allocation, and inspections with suppliers, third parties, and contractors. Prepared and conducted leakage tests for valves and hydrostatic tests for heat exchangers. Coordinated QCR records with DCSM contractor. Supervised and managed the repair, replacement, and installation of piping, valves, heat exchangers, and towers based on procedures, installation manuals, and ITP. Developed and closed QA/QC turnover packages. Developed ITP and work packages by referencing and reviewing client specifications. Reviewed P&ID and ISO drawings to ensure appropriate WPS were referenced with weld details, ensured the correct welding procedures were used, and verified weld consumable and welder qualifications. Monitored welding activities for all work packages involving static equipment such as reactors, regenerators, drums, and towers (e.g., repairing or replacing cyclone dip legs, trickle valves, burner tips), and auxiliary systems, piping, valves, and C&I valves in the RFCC unit. Ensured welders were qualified and deployed for jobs based on their qualification ranges for welding processes, material grades, thickness, diameters, and positions. Maintained positive relations with clients and coworkers through effective communication and conflict management. Completed final documents that satisfied client requirements Show less

• 

  SK engineering & construction Co., Ltd

  Jan 2015 - Sept 2015

  Quality Surveillance Representative

  Company: SK engineering & construction Co., Ltd.Location: SK E&C 100 Euljiro, Jung-gu, Seoul 100-192, KoreaTel : +82-2-3770-7216Position: InspectorWork Scope: I’m working as Quality Control inspector for SK Engineering & Construction Co., Ltd.Project Name: Nghi Son Refinery and Petrochemical limited liability company- Inspector of Chemical Process Equipment(Column, Pressure vessel, Heat Exchangers, Pipe…)- General control fabrication job when start to finished Project: * Duties: Welding inspection, Fabrication inspection, review as built documents. Show less

• 

  DOOSAN HEAVY INDUSTRIES VIETNAM CO. LTD - Site

  Oct 2015 - Oct 2017

  QC Engineer

   Conducted QA/QC activities for chemical process equipment including steel structures, pressure vessels, columns, towers, heat exchangers, heaters, tanks, and piping. Inspected raw materials such as pipes, fittings, fasteners, beams, columns, steel plates, and valves in accordance with approved purchase orders, client specifications, approved drawings, and applicable codes and standards. Verified material certificates against actual materials and prepared inspection reports (progress and final reports). Created tabulations of materials (TOM) with corresponding Material Test Records (MTR). Checked material surface conditions, dimensions, fit-up, groove angle, root gap, and joint cleanliness. Assessed the quality and condition of base and filler materials. Reviewed applicable documents such as WPS, PQR, calibration certificates, and welder qualifications. Performed welding inspections to ensure all activities adhered to welding specifications and qualified procedures. Carried out inspections before, during, and after welding, including checking welding equipment conditions, current, voltage, polarity, and individual weld passes. Verified preheating and post-weld heating, as well as interpass cleaning and temperature. Monitored welding activities to ensure compliance with project specifications and procedures. Conducted inspections of all materials used for welding and prepared quality reports. Monitored the quality of work at each stage of the process. Reviewed specifications referencing applicable codes and standards. Witnessed and verified Non-Destructive Tests (PT, MT, RT film review). Witnessed testing activities alongside clients and third parties and ensured final documentation was approved. Documented all inspection activities, including results and remarks. Show less

• 

  Fichtner Consulting Engineers Ltd

  Oct 2017 - Sept 2019

  Engineering Consultant

   Planned and supervised the erection of boilers, ancillary equipment, duct steel structures, ESP, RAPH, etc. Reviewed and verified ITPs (Inspection Test Plans), MS (Method Statements), procedures, and drawings before their use. Ensured field activities were performed according to drawings, client specifications, and applicable codes, including Positive Material Identification. Reviewed and issued comments on related documents, drawings, and procedures as per project specifications. Conducted consultancy and witnessed all inspections and tests as per ITPs, approved drawings, and quality control plans. Witnessed Welder Qualification Tests (WQT) in accordance with ASME IX and AWS codes. Witnessed and reviewed hold points and inspection and test plans. Inspected weld fit-up before root pass and visually inspected final welds; controlled welding materials (e.g., electrodes, filler metal, flux) and backing of low-hydrogen electrodes. Prepared progress reports and completed welding documents for QC dossiers. Coordinated with stakeholders to ensure project success. Finalized and submitted all documents to the QA/QC manager, initiating or recommending solutions when required. Show less

• 

  Nghi Son Refinery and Petrochemical Limited Liability Company

  Sept 2019 - Jan 2020

  Maintenance Engineer

  Position: SupervisorResponsibility:  Reviewed work packs, planning packages, and tracked work progress. Executed DCSM phase for RFCC, AF00. Prepared working conditions, PTW, and handled repair and maintenance for reactors, valves, heat exchangers, columns, and refractory based on schedule. Supervised and controlled the work progress of DCSM contractor to meet the overall schedule; checked, removed, repaired, and reinstalled equipment based on procedures, installation manuals, technical documents, and ITP. Ensured the quality of DCSM contractor work and coordinated with DCSM contractor and NSRP for material preparation, equipment arrangement, manpower allocation, and inspections with suppliers, third parties, and contractors. Prepared and conducted leakage tests for valves and hydrostatic tests for heat exchangers. Coordinated QCR records with DCSM contractor. Reported daily and weekly work progress and issues to NSRP DCSM Leader. Developed and closed QA/QC turnover packages. Developed ITP and work packages by referencing and reviewing client specifications. Reviewed P&ID and ISO drawings to ensure appropriate WPS were referenced with weld details, ensured the correct welding procedures were used, and verified weld consumable and welder qualifications. Monitored welding activities for all work packages involving static equipment such as reactors, regenerators, drums, and towers (e.g., repairing or replacing cyclone dip legs, trickle valves, burner tips), and auxiliary systems, piping, valves, and C&I valves in the RFCC unit. Ensured welders were qualified and deployed for jobs based on their qualification ranges for welding processes, material grades, thickness, diameters, and positions. Maintained positive relations with clients and coworkers through effective communication and conflict management. Completed final documents that satisfied client requirements Show less

• 

  Long Son Petrochemical

  Mar 2021 - Jul 2022

  WELDING INSPECTOR And LINECHECKER

   Monitored daily welding activities on-site. Checked specifications, procedures, and compliance with international codes and standards related to the project. Coordinated with clients to verify test packages and prepare punch lists; reviewed drawings (Isometric, P&ID) and materials. Verified the closure of punch lists with subcontractors. Reviewed and verified piping test packages before testing, and witnessed hydro tests, inspections, and reinstatement test packages. Monitored and witnessed welding activities, including "Golden Weld." Completed and endorsed all inspection records from initial to final inspection for piping systems and handed over to the client. Worked as a Quality Control Inspector within the Quality Assurance team. Inspected assembly, manufacturing, and installations, including boilers, pressure vessels, heat exchangers, auxiliary equipment, steel structures, tanks, and piping assemblies. Reviewed the ITP at all inspection stages to ensure all activities met inspection requirements, fulfilling company "hold points" in a timely manner. Inspected incoming materials for compliance with certification standards. Witnessed welder qualification tests according to procedures. Monitored all welding activities, including fit-up, welding consumables, pre-heating, PWHT, and visual inspections, ensuring compliance with qualified procedures and welders. Verified insulation material types and cover plate thicknesses as per specifications. Conducted visual inspections of insulation installation according to specifications. Witnessed and/or conducted painting tests, such as holiday, dust, salt, and adhesion tests, in compliance with ISO and ASTM standards. Prepared inspection reports (progress and final) in accordance with ITP requirements. Managed drawings, QC documents, and reports. Submitted daily, weekly, and monthly reports to the Site Manager. Show less

• 

  PTSC

  Apr 2023 - now

  QA/QC Manager of WIND FARM PJT

   Developed standards and templates for documents and procedures used in Quality Management (QM) monitoring, including report forms, findings, NCR registration, and OB monitoring. Prepared project-specific QA procedures. Advised and assisted project team members on quality management matters; planned and conducted audits to meet quality requirements. Monitored project-specific quality plans in collaboration with Technical Groups, providing constructive feedback for ongoing improvement. Supported the setup, review, approval, and implementation of project-specific quality procedures, standards, testing and monitoring programs, QA checklists, and QA documentation. Documented lessons learned from quality-related activities, both internally and with customers. Managed vendor quality; led quality review meetings with factories for continuous quality improvement; collaborated closely with planning, interface, and change control functions. Received certification training in welding, WPS, welder qualification projects, and specialized training in quality management and project management. Resolved all quality issues from handover to shipment. Provided technical advice and resolved technical problems. Show less