Jeffry De Guzman

Experience

• 

  Hanjin Heavy Industries and Construction Ltd.Co.

  Dec 2007 - Nov 2008

  Autocad Draftsman

  • Container ship accomplished was CMA CGM Antoine de Saint Exupery 20,600TEU-class.• Modelling of Hull structure according to hull construction drawing using Autocad & Tribon Software provided by Yeongdo Shipyard, Busan South Korea.• Performed block assembly drawing including information of hull outfittings installation and penetration hole.• Performed cutting plan and bending information for piece production.• Handled steel materials and paint materials, distributed drawings to the relevant production department.• Achieved of certificate of training in attending and successfully completed the Control of Records and Control of Documents education conducted by quality assurance Show less

• 

  Penta-Shimizu-Toa Joint Venture

  Nov 2008 - Dec 2009

  Electrical & Civil Autocad Draftsman

  • Project accomplished are Boton Wharf, Nabasan Wharf and Marine Terminal, NSD Warehouse, & Range Light & Telecom Tower System.• Developed/created accurate and detailed shop drawing for electrical layouts such as mounting detail, elevation, section & enlarge details for Lighting System, Power System, Auxiliary System, Grounding System, Lightning Protection System, Fire Alarm System, Telecom (Voice & Data), Public Address, Master Clock, CCTV/Security System & Fire Alarm Instrumentation System.• Performed drawing such as concrete reinforcement for crossroad ductbank & auxiliary, bar diagram & bar schedule, foundation plan, elevation & section detail.• Performed longitudinal profile for ductbank, sewer drainage pipe & manhole/handhole, & perimeter fence.• Performed civil 3d software for grading system & coordinates, grade elevation• Performed Redline & As-Built drawing as per actual site layout, material submittal & design specification accordingly. Show less

• 

  AC Technical Services

  Feb 2010 - Aug 2015

  Electrical & Telecom Autocad Draftsman

  • Project accomplished are Rack-IT Data Center, Arya Residencies, Internet Data Center (IDC), CCF Worship and Training Center, Cebu Data Center, & Philip Morris International Warehouse.• Performed material take off quantity estimate/bill of materials prior for purchase order (PO). • Developed/created accurate and detailed shop drawing for electrical layouts such as mounting detail, elevation, section & enlarge details for Lighting System, Power System, Auxiliary System, Grounding System, Lightning Protection System, Fire Alarm System, Telecom (Voice & Data), Public Address, Master Clock, CCTV/Security System & Fire Alarm Instrumentation System.• Coordination drawing to other discipline designer /draftsman to maintain & consistent project schedule.• Performed longitudinal profile drawing for duct bank reinforcement or direct buried, auxiliary & manhole/hand hole.• Performed Tie-In connection detail, Tapping detail, stub-up/out, sleeve detail, & roughing-ins for slab/embedded pipe detail.• Performed roughing-ins setting-out dimension for the power, auxiliary, lighting and fdas devices for pipe stub-up/out.• Performed mounting detail drawing for feeder conduit, panel board, disconnect switch, cable tray, cable ladder, trench, trunking, & bus duct.• Performed Redline & As-Built drawing as per actual site layout, material submittal & design specification accordingly. Show less

• 

  Ensiab Engineering Consulting (E2C)

  Nov 2015 - Jun 2018

  Electrical Designer/Draftsman

  • Project design accomplished was Makana Metal Factory, Juaymah Laydown Yard, OED Auditorium (Petrokemya), & United Visitor & ID Building Office with Royal Commsion & Sabic involved.• Reviewed and analyzed project scope of work & client standards specification.• Performed site survey & verification, prepare field sketches and determine missing information required to complete the job.• Performed design drawings as per project scope of work, specification, international codes & calculation.• Developed/created accurate and detailed design drawing for electrical layouts such as layout plan, mounting detail, elevation, section, enlarge details, schedule & material data for Lighting System, Power System, Auxiliary System, Grounding System, Lightning Protection System, Fire Alarm System, Telecom (Voice & Data), Public Address, Master Clock, CCTV/Security System & Fire Alarm Instrumentation System as per engineer specification and instructions.• Coordination drawing to other discipline designer /draftsman to maintain & consistent project schedule.• Prepared all engineering design drawings and specification with bill of material from conceptual sketches and basic engineering scopes, to ensured design packages are delivered as per drafting standards specification, company/ client procedures and safety regulations.• Prepared on time submittal of all required drawings, documents, material information & specification.• Performed comprehensive critical review/check of drawings done by fellow designer/draftsman.• Prepared, assemble and issue engineering design drawing packages for engineer/clients review and approval. Show less

• 

  Yuksel Insaat Saudia

  Nov 2018 - Apr 2021

  Autocad/Revit Draftsman (Architecture & MEPF Discipline)

  • Project accomplished was Saudi F-15 Fleet Modernization Program with different facility such as Earth Covered Magazine (ECM), Corrosion Control Facility (CCF), Weapon Release/Gun System Shop Building, Avionics Pod Facility (AFP), Fuel System Maintenance Hangar (FSM), Pump Room & Comm Room located at Dharan Air base with involved Royal Saudi Air Force, US Air Force, Gilbane, AECOM & Michael Baker International.• Developed/created accurate and detailed shop drawings including plan, elevation, section, isometric, 3D modelling & BIM modelling for HVAC, Plumbing, Fire Suppression, Clean Agent, Steam, Chilled System & Building Automation System or Building Management detection or security System as per approved material submittal data, design specification and engineer instruction.• Performed material take off quantity estimate/bill of materials prior for purchase order (PO). • Developed assembly/fabrication drawing as per engineer’s instruction.• Performed cutting list and tagging of metal duct to develop assembly/fabrication drawing and preparation for installation.• Performed setting-out dimension for the hvac equipment, piping equipment, piping stub-up/out layout, metal duct & other accesories.• Performed coordination drawing & comprehensive critical review/check of drawings done by fellow designer/draftsman to know the conflict/obstruction for every discipline.• Performed Redline & As-Built drawing as per actual site layout, material submittal & design specification accordingly.• Performed data uploading to smartapp gilbane application for material submittal, shop drawing & as-built drawing.• Performed equipment tag, identification & label drawing and place at site as per design specification and punchlist for close-out. Show less

• 

  Yuksel Holding A.S.

  Jun 2023 - now

  BIM Modeler/Drafstaman (MEP, Civil & Architectural)

  • Project accomplished Simulator Building located at Al Qassim Royal Saudi Land Forces Aviation Command Phase 2A Facilities and Infrastructure with involved USACE, Parsons and Tetra tech.• Performed Level of Development LOD 450 & LOD 500• Familiarized of building design principles and industry standards with strong technical and analytical skill set is essential.• Able to perform manage multiple projects simultaneously and meet tight deadlines.• Preparing drawing, sketches, charts and other visual aids to communicate information to others.• Provided design and documentation of projects using Revit software, including creating drawings, modifying existing elements, adding annotation, and checking accuracy.• Provided technical support to project teams by analyzing and solving problems with models or drawings and providing solutions as appropriate.• Provided simulation, combine 3D models, navigate around them in real-time and review the model using a set of tools including comment, redlining, viewpoint and measurements.• Performed quality control reviews on assigned project to ensure compliance with company standards and procedures. Show less

• 

  M.R. Al Khatlan Co.

  Jul 2023 - Jul 2023

  Civil, Architecture & MEP Draftsman

  • Project handled was relocate jazan-abha refined products pipeline for in-plant facility with Saudi Aramco involved.• Performed weld mapping and weld logging• Developed control list of drawing and document tracking• Developed assembly/fabrication drawing as per engineer’s instruction.• Developed/created accurate and detailed shop drawings including plan, elevation, section, isometric, 3D modelling as per Saudi Aramco Standard & Specification.• Performed material take off quantity estimate/bill of materials prior for purchase order (PO). • Performed coordination drawing & comprehensive critical review/check of drawings done by fellow designer/draftsman to know the conflict/obstruction for every discipline.• Developed formwork, scaffolding, shoring detail drawing, bar bending detail, & schedule.• Make detailed drawing for concrete reinforcement of crossroad duct bank & auxiliary, • Performed Redline & As-Built drawing as per actual site layout, material submittal & design specification accordingly. Show less