Radik Gabdrashitov

Experience

• 

  LLC «Tumenburgaz» Drilling department № 1 (SC of JSC «Gazprom»)

  Jun 1997 - Mar 1998

  Development drilling assistant driller

  • Well bore interventions associated current workover and WO operations• Preparation of drilling fluid formulations according to geological technical plan. Monitoring the level of cleaning and decontamination of solution.• Tripping operations.

• 

  «Zapolyarneft» Department of Oil Recovery Enhancement and workover (JSC «Noyabrskneftegaz») Vingapou

  Jun 1998 - Nov 1998

  Workover assistant driller

  • Well bore interventions associated current workover and WO operations• Tripping operations for performing remedial cementing, eliminating complications and preparation of wells for well completion

• 

  LLC «Bashkirian Petroleum Research and Engineering Institute» (JSC «Basneft»)

  Jun 1999 - Nov 2000

  Completion Engineer

  Working in the system of JSC "Bashneft" is presented in 183 oil and gas fields. Most of the fields are on the final stages of development and are complicated by the presence of bottom water and high H2S.• Design, manufacture and industrial use of casing layouts;• Method validation and the direct support of casing cementing in complicated conditions;• Selection mortar formulation.• Justification of depth of installation of cementing coupling and pressure calculations for multi-stage cementing of casings, according to the standards of ASME.• Introduction of technology of multipacker (swelling packers) casing cementing with closing water beds.• Development and technology introduction of a controlled setting of cement plugs using software AutoCad;• Building cement layouts ( cement stage collar, knock out collar , modular safety valves, packers with filtrating hoses etc.) and the subsequent technological support of cementing jobs with their use in compliance with all standards and safety standards at the facility HSES-plan;• Calculation of the technological parameters of cementing using the required software of cementing operations.• Analysis of the quality of well casing using log data (ASC) and the quality control of the works SQC.Special experience:Participation in the defence of annual projects to the management of JSC "Bashneft". Show less

• 

  «Oil Engineering»

  Nov 2000 - Mar 2006

  Leading process engineer

  Working in an engineering company engaged in scientific research works, developing, testing and further industrial introduction of enhanced oil recovery methods by means of vibrowave technologies. The company performs works in the CIS countries, Syria, China and Venezuela. The total project budget of more than $ 10 million.• Technical and technological support for the work of well development and intensification of the reservoir performed by workover and well stimulation crews;• Technological support of coiled tubing well intervention crews;• Developing, bench test and downhole tests of equipment increasing technical-and-economic parameters of drilling and the quality of fixing of casings.• Coordination of workover during water shutoff treatmentт;• Making work plans, direct guidance and technical support during well acidizing, vibro-foaming, complex chemical (using downhole injection) treatment of wells;• The availability, compliance and specification (SS) available in the shop equipment and reagents for downhole operations; Ensuring of conducting of work safety HSES-plan;• Provision and technical compliance of equipment running into wells;• Coordination of operators during the fracturing of carbonate reservoirs (oil-acid fracturing) HydroVibroFrac as per the standards of ASTM; • Monitoring wells after treatments using geophysical data (flowmeter);• Coordination coiled tubing crews during well intervention, assessment of the equipment condition and the flexible tube (the program Orion) when operating in a hostile environment;• Development of technology to improve the quality of casing fixing by the way of vibrocementing;Collaborative scientific and technical studies of reservoir performance using subsurface pressure gauge and surface vibration sensors while hydraulic fracturing. Show less

• 

  Gazpromneft-Khantos

  Mar 2006 - now

  • Management and coordination of a team of engineers (supervisors) supervising contractors;• Participation in the tenders and selection of candidates for Firms providing services;• Contracts with the company to provide services;• Participate in technical meetings and selectors;• Direct technological support of downhole operations by workover, coiled tubing and hydraulic fracturing fleets;• Providing head office of the Company with technical parameters;• Making quarterly and annual presentations on the work of the contractor's company (Frac, CT and WO);• Participation in tender procedures (keeping statistics and ranking of the contractor). Show less Direct technological support of downhole operations by workover, coiled tubing and hydraulic fracturing fleets;Technological support the work performed by workover: Verifying all the licensing and start-up documentation, compliance with all regulations and requirements of the HSE Health and Safety;Direct support of works, hydraulic fracturing (using MFrac, FracPRO and Meyer softwares). Direct engineering support for operations using coiled tubing (with Cerberus software). Coordination of the work, the availability of all permits, approvals of plans changes of work in the occurance of complications, monitoring of equipment operating time API 5L (program Orion); The introduction of advanced technologies in fracturing in Russia: Foam Frac Treatments (Schlumberger, CWS), fracturing c using a flexible tubing Cobra Max (Halliburton), multi-stage fracturing (for horizontal wells) and Acid Frac (Trican). Coordination of activities, (during jobs) operational changes in the work plan;Evaluation of the work of the contractor after the performed work, time spent, resources (CTR) and the evaluation of the effectiveness of these costs (SAP);Compliance with the safe and efficient accomplishment of the well work and complete quality control of the works SQC;Making quarterly and annual presentations on the work of the contractor's company (Frac, CT and WO);Participation in tender procedures (keeping statistics and ranking of the contractor).Making audits in companies: the availability of a complete set of documents, compliance of equipment to technology, the availability and remoteness of bases(SM), chemical analysis, etc. (according to international standards ISO). Further rendering of decision on this company (coiled tubing or fracturing fleet) to requirements imposed by the Company by the Customer (SWOT-plan). Show less

  • Сhief specialist by the engineering of hydraulic fracturing

    Nov 2013 - now

  • Lead engineer for coiled tubing and fracturing

    Mar 2006 - Oct 2013