Atul Kumar Singh

Experience

• 

  Auto Profiles Ltd

  Nov 2017 - Feb 2018

  GET at electrical maintenance

  KEY RESPONSIBILITY:1. Learning basics of press machines and various routine maintenance activities.2. Maintenance of all electrical equipment’s for smooth operation of Press Machines.3. Issuing spares as per maintenance requirements and daily activities.4. Keeping track of ongoing work and coordinate in pre planning for various maintenance activities.5. Reporting to the department head regarding various progress and maintenance requirements in various areas for efficient utilization of machines and manpower. Show less

• 

  BNK Power Solution Pvt. Ltd

  Mar 2018 - May 2019

  Electrical Engineer

   KEY RESPONSIBILITY:• Knowledge of Operation and Maintenance of Alternator (TDPS), Transformers (Voltamp), LT motors, HT (Siemens) and LT (Schneider) Panels, VFD Panels (ABB), Diesel generator (Cummins), Battery & its Charger, Illumination System etc. • Synchronized turbine (Siemens) of capacity 10MW with utility grid. • Ability to understand electrical single line diagrams, Power and control circuits. • Adhere to daily, weekly and monthly checks of equipments to ensure smooth operation of Plant. • Maintain and keep updated accurate logs of Maintenance activities and failure Reports. • Work as per issued permit following LOTO system thereby ensuring safe maintenance practices.• Utilization of spares as per maintenance requirements and daily activities. • Implementation of 5S.• Update daily maintenance activities in CMMS.• Preparation of daily and monthly reports of generation and auxiliary consumption.• Troubleshooting in case of fault in various sections. Show less

• 

  BCL Industries & Infrastructures Ltd

  Jun 2019 - Oct 2021

  Electrical Engineer

  Operation and maintenance of 9MW Cogen power plant along with the distillery unit(200 KLPD), Process plant, Milling plant, dryer section, bottling plant.1. Operation and Maintenance of Alternators and Synchronising(with utility grid and in parallel operation), Transformers, Overhauling of LT motors, Soft starters, HT and LT Panels, VFD Panels, Diesel generator, Battery, Illumination System etc.2. Synchronised two turbines having capacity of 4.4MW & 4.6 MW(Triveni turbines), Alternators 6250 KVA(TDPS & WEG), Worked on HT breakers 11KV (ABB), LT breakers(Siemens), soft starters(Siemens), LT VFD’s(ABB and Siemens),(3.15MVA,3MVA,1MVA) transformers, ESP and its transformer(Ador powertron and hind rectifiers), Compressors(ELGI),1010 KVA DG(Cummins).3. Installation & Maintenance of electrical panels and starters (DOL, RDOL, STAR DELTA, VFD, SOFT STARTERS) and troubleshooting in case fault occurred in various section of plant.4. Maintain inventory of electrical spares and tools.5. Preparation of daily and monthly reports and reporting head of department about various progress of ongoing work and maintenance requirements in various sections for efficient utilization of machines and manpower in plant.6. Co-ordinate efforts with other contractors involved in installing or maintaining equipment’s in healthy condition.7. Perform scheduled preventive maintenance tasks of equipment’s to detect and prevent unwanted failures.8. Send defective units to the manufacturer or to specialized repair shop for repair.9. Maintain equipment’s logs that record performance problems, repairs, tests and schedule replacements.10. Preparation of checklist for condition monitoring of crucial equipment's.11. Train and manage maintenance personnel to get optimum results.12. Ensure full compliance with Health and Safety Management all the time with zero tolerance policy.13. Provide tool box session to all Electrical Man-Power to introduce electrical safety. Show less

• 

  JITF Infralogistics Ltd.

  Nov 2021 - Nov 2023

  Senior Electrical Engineer

  Responsible for erection, testing and commissioning of 30MW Waste to Energy Power Plant.Key Responsibilities ;1. Erection, testing and commissioning of 66KV substation and it's equipment's (Isolators,SF6 breakers, CT, PT, LA, Power transformer (36/40 MVA)etc.2. Erection, testing and commissioning of 30MW TG set (Alternator, HT switchgear, LT switchgear, VVVF drives, Numerical Relays, AVR, MCC panels, PCC panels, LT motors etc.3. Erection and testing of earthing grid of 66KV substation.4. Testing of HT and LT cables before installation.5. Installation and testing of 66KV underground cable upto Destination grid.6. Responsible for end to end communication of generation data from plant till SLDC.7. Issuing materials to various vendors involved in erection work at site.8. Keep track of all works given to various vendors as per project schedule.9. Maintain and indent materials required for erection work at site.10. To check and report to management about the work progress as per schedule and carry out work as per given drawings.11.To review electrical drawings and schedules whether it is as per requirement, modify if needed.12. To check and prepare the lighting requirements in various sections of plant.13. Inspection and testing of equipments to be installed at plant( ie Control panels, transformers, cables, RTU & FOTE, LT panels), from physical check to electrical tests.14. To review the technical aspects of equipment offered by various OEM/ consultant and raise issues as per requirement of plant.15. Maintaining database for all spares & their inventory.16. Regular following with EMS & Shift log books, analyse real time data, trends & reporting the findings for optimum results.17. Raising purchase requisition in SAP & service orders as per plant requirements.18. Regular following with permit record books & ensuring proper adherence to safety protocols. Show less

• 

  JITF Infralogistics Ltd.

  Apr 2024 - now

  Assistant Manager

  Responsible for erection, testing and commissioning of 20MW Waste to Energy Power Plant.Key Responsibilities ;1. Erection, testing and commissioning of 33KV substation and its equipment's (Isolators,SF6 breakers, CT, PT, LA, Power transformer (20/25 MVA)etc.2. Erection, testing and commissioning of 20MW TG set (Alternator, HT switchgear, LT switchgear, VVVF drives, Numerical Relays, AVR, MCC panels, PCC panels, LT motors etc.3. Erection and testing of earthing grid of 33KV substation.4. Testing of HT and LT cables before installation.5. Installation and testing of 33KV underground cable upto Destination grid.6. Responsible for end to end communication of generation data from plant till SLDC.7. Issuing materials to various vendors involved in erection work at site.8. Keep track of all works given to various vendors as per project schedule.9. Maintain and indent materials required for erection work at site.10. To check and report to management about the work progress as per schedule and carry out work as per given drawings.11.To review electrical drawings and schedules whether it is as per requirement, modify if needed.12. To check and prepare the lighting requirements in various sections of plant.13. Inspection and testing of equipments to be installed at plant( ie Control panels, transformers, cables, RTU & FOTE, LT panels, HVAC, DG sets), from physical check to electrical tests.14. To review the technical aspects of equipment offered by various OEM/ consultant and raise issues as per requirement of plant.15. Maintaining database for all spares & their inventory.16. Regular following with EMS & Shift log books, analyse real time data, trends & reporting the findings for optimum results.17. Raising purchase requisition in SAP & service orders as per plant requirements.18. Regular following with permit record books & ensuring proper adherence to safety protocols. Show less