Arditya Widhana

Experience

• 

  PT. Panasonic Shikoku Electronic Batam

  Dec 2004 - May 2010

  Process Engineer - Electrical

  Job Description : Ensure parameter of all machine production run follow the specification accordinglyJob Responsible : Correlation with gold master spec of machine parameter before it used released Refer to the machine condition, analysis of problematic NG product using 4M and 5W methodology Provide silver master spec of machine parameter to ensure it stabilize Monitor and manage electrical test yield as management target Conduct evaluation and preliminary analysis to reduce electrical defect Study and define action for continuously yield improvement Monitor daily electrical test capacity and cycle time Provide electrical testing procedure, method and working instruction  Support production in training during new models' or new products' electrical testing introduction support production to achieve daily objectiveKnowledgeable on following equipment : 2 Lens Spot Adjustment DVD Det Adjustment BD Det Adjustment Some Function Test (BD, DVD, and Aberration test) Show less

• 

  Racer Technology

  Jun 2010 - Nov 2010

  QA Engineer

  Job Description : Responsibility of product quality issue to Supplier and Customer Responsibility to close RMA and Customer Complaint Responsibility to make sure all Equipment have calibration To make Monthly Report to Manager Quality ( Batam / Singapore ) Make FA ( First Article ) for the New Drawing of Respective parts changed Liaise to Process and Production regarding for all issue / failure in Production Ensure the quality inspection (IQC/IPQC/OQC) are being conducted Responsibility to make/revise QIP As Internal Auditor Ensuring the effectiveness of implementing PCAR (Preventive & Corrective Action Report) Show less

• 

  Siemens Energy Sector Oil & Gas Division

  Jan 2011 - Dec 2011

  Maintenance Electrician

  Successful of project:Support team commissioning for install temporary power supply of HVAC, Lighting Lamp, and Battery Charge Description of Position:The prime function of this position is to ensure all electrical equipment, installation and machinery software to have maximum performance support production activity.Duties :  Inspect all electrical equipment and tools prior to operate and provide the report Ensure all electrical equipment are manage properly to have maximum performance on day by day basis. Follow up problem happen on all electrical equipment that may affect to construction/operation. Ensure all electrical equipment good conditions through regularly checking and verification. Making plan and schedule of inspection all equipment every month.  Ensure that all electrical equipment maintenance plan is doing properly as per schedule. Controlling and manage electrical spare part on daily base to support construction/operation. Make regular report monthly base about the status of all equipment and machinery.Knowledgeable on following equipment : Electrical Panel Generator Welding Travo Compressor Over Head Crane Show less

• 

  PT. Mega Synergy Powerindo

  Jan 2012 - Aug 2012

  QC E&I Inspector

  Duties :  Planning and organizing inspection and testing activities at site. Ensuring Inspection & Testing activities are done and follow projects specification. Ensuring Inspection & Testing activities are done and follow projects specification. Witness with the client for inspection based on RFI. Inspection of various material electrical and instrument. Inspection of various electrical and instrument installation. Inspection of various cable termination and testing, grounding/earthing / bonding, install support, tubing, tray, ladder, install tubing and instrument equipment. Do Mechanical Completion every inspection. Show less

• 

  Global Process Systems

  Sept 2012 - Jan 2013

  Electrical & Instrument Inspector

  Duties : Prepare test report and ensure that inspections are carried out as approved ITP. Witness instrument calibration, loop checking, lighting, cable ladder, cable test grounding and power receiving. Preparation of punch list. Inspection Instrument and Electrical base on RFI. Check to the field of Electrical and Instrument installation base on drawing. Perform daily carry out patrol, inspection and monitoring work progress. Discuss and coordinate with QA/QC Engineer, Production Supervisor and Engineering team if found major or minor problem/clashing with the other equipment installation. Show less

• 

  PT. Delimax Indonesia

  Jan 2013 - Jul 2013

  QC Electrical Inspection

  Duties :  Planning and organizing inspection and testing activities at site. Ensuring Inspection & Testing activities are done and follow projects specification. Ensuring Inspection & Testing activities are done and follow projects specification. Witness with the client for inspection based on RFI. Inspection of various material electrical and instrument. Inspection of various electrical and instrument installation. Inspection of various cable termination and testing, grounding/earthing / bonding, install support, tubing, tray, ladder, install tubing and instrument equipment. Do Mechanical Completion every inspection. Show less

• 

  Siemens Energy Sector Oil & Gas Division

  Aug 2013 - Jul 2014

  QA QC Electrical Instrument

   Prepare the ITR (Inspection Test Report) document before inspection. Perform Testing, Inspection for electrical and telecom discipline. Working to Sub System ITR requirement. For control and power cable, ensure all cores are merger tested. To isolate and energize LV and HV motors and accept electrical permit to work. Coordinate and support with (Mechanical Completion Tech, Production Tech, and Vendor Tech) to clearance punch list item. Generate the daily testing and inspection test report. Verify the cable continuity for all cores are completed and record if any abnormalities. Inspection Installation Electrical & Instrument, as per Hook Up drawing, P&ID drawing, and termination diagram. Inspection of various cable termination and testing, grounding/earthing, install support, tubing, tray, install tubing and instrument equipment Ensuring that electrical/Instrumentation construction activities (i.e. installation, loop checks, completions and pre-commissioning of the Electrical/Instrument works) are carried out by Sub-Contractors in accordance with approved Procedures, Specifications, Method Statement, Project Specifications, Project Procedures and relevant codes & Standards to review the relevant document prior to start of construction e.g. ITP,Project specification, etc. Performing the required surveillance (“monitor”, “Witness” and “hold point”) on due time as per the related inspection notification and being acknowledged in advance with the applicable standards and specification. Show less

• 

  Saipem

  Aug 2014 - Jan 2017

  Electrical Supervisor

   Supervise contractors to carryout jobs based on Client Standard Procedures and Strategies including prepare the Method Statements, for PM & CM/BR of electrical discipline. Reporting directly to the dedicated Area Team Leader, the Electrical Supervisor oversees and guides all maintenance execution activities related to the Electrical maintenance Coordinate, directing and leading the technician to carry out the jobs as per Client standards, should also able to hands-on any electrical task of activity. Executing maintenance program PM, CM, PDM as mandated by company. Safety Critical Equipment has to be treated more strictly by mean the quality and timely manner. Job performed to be on time and safely executed, reporting and closing all documentation related post job completion Ensuring that the inspection and controls are carried out and documented in accordance with the quality procedure. Ensuring all equipment and tools for support project. Make schedule and plan to do maintenance base on SAIPEM standard, monthly, weekly, daily. Spend more time at field to ensure that all his team member performing his duty as per the procedure and rigorously working safely and not tolerating any unsafe behavior. Show less

• 

  Nalendra Halilintar Samudra

  Sept 2017 - Apr 2018

  Electrical Inspector

  Nalendra Halilintar Samudra (NHS) is institute of inspection technical under government. All customers / companies with electricity installations (transformer, generator, network distribution low voltage, medium voltage, high voltage) required to certification operation based on government rules.Job description:- Prepare ITR(Inspection Test Report) documents - Ensure that equipment eligible operation- Check and testing merger following of standard inspection. - Check and testing grounding system. - Check protection system of equipment. - Check visual equipment (layout, fire extinguisher system, environmental control, etc..) Show less

• 

  Sembawang Shipyard

  Jun 2018 - Apr 2020

  Finish project

  • Project Coordinator

    Jun 2018 - Apr 2020

  • Electrical Supervisor

    Jun 2018 - Apr 2020
• 

  NnG Offshore Wind

  Apr 2020 - Jun 2021

  Site Representative

  Witness and visual inspection of receiving all mechanicals or Electricals materials.

• 

  Tarpon Energy Services

  Jul 2021 - Oct 2021

  E&I Foreman

  Duties and Responsibility :➢ Coordinate, directing and leading the technician to carry out the jobs as per client standards, should also able to hands-on any electrical task of activity.➢ Ensuring that the inspection and controls are carried out and documented in accordance with the quality procedure.➢ Assign job tasks and work as per project schedule➢ Check and review all Electrical outfitting drawings and refer issues requiring changes.➢ Prepare for RFI(Request for Inspection) before inspection as per standard. ➢ Follow up all comments of client request and rectification. ➢ Reporting directly all activities related with perform of working schedule➢ Spend more at field to ensure that all his team member performing his duty as per the procedure and rigorously working safely and not tolerating any unsafe behavior.➢ Make completion report following drawing requirements and actual progress reports. Show less

• 

  CSTS (Chiyoda, Saipem, Tripatra, SAE) JO

  Jan 2022 - Jun 2023

  Electrical Supervisor

  Onshore LNG EPC for Tangguh Expansion ProjectDuties and Responsibility : Coordinate, directing and leading the sub-contractor to carry out the jobs as per client standards, should also be able to hands-on any electrical task of activity. Collecting & reporting of subcontractor electrical construction work progress Ensuring that the inspection and controls are carried out and documented in accordance with the quality procedure. Assign job tasks and work as per project schedule Check and review all Electrical outfitting drawings and refer issues requiring changes. Follow up and coordination for all pending activities related with ITR and RFI. Liaise and attend MC walk down with client and follow up immediately all pending during these activities. Follow up Qc punch list and Mechanical Completion Certificate walkthrough (MCC) Coordinate and communicate to engineering department in case of some discrepancy between approved drawing & actual installation (Field Document Change – FDC) Reporting directly all activities related with perform of working schedule Spend more at field to ensure that all his team member performing his duty as per the procedure and rigorously working safely and not tolerating any unsafe behavior. Make completion report following drawing requirements and actual progress reports Show less

• 

  KBR/Energo Engineering

  Oct 2023 - Sept 2024

  Electrical and Instrumentation specialist

  Sumbawa LNG Regasification Facility Project

• 

  Wasco

  Dec 2024 - Jul 2025

  Senior E&I supervisor
• 

  PT Chandra Asri Pacific Tbk

  Aug 2025 - now

  Electrical Construction Supervisor

  CAA Project