Bastien TAUSSAC

Experience

• 

  Ailes Anciennes Toulouse

  Jan 2010 - now

  Secretary, Board member, Digital media manager and Volunteer

  The Ailes Anciennes Toulouse is an association which preserves a fleet of more than 110 aircraft fromthe smallest ones to the biggest like the Super Guppy. They also own a huge collection of engines,instruments and various pieces related to the aviation history.My role as secretary is mainly to manage all the aspects related to the general administration and thelegal. I’m also in charge of the digital communication and the flyer/poster conception.I of course take part of the technical projects like the cabin refurbishing of the Caravelle or, more recently, the retrieval of a Dassault Alpha Jet. Show less

• 

  Airbus

  Apr 2012 - Jun 2012

  Flight Test Specialist Trainee Engineer

  Subject of the internship : Study about the use of a tablet during operability testsEvaluation and test a software to define the axes of amelioration.Preparation and realization of operability tests.

• 

  Airbus

  Sept 2012 - Sept 2013

  Flight Test Specialist Apprentice Engineer

  Management of the Operability Test Campaigns from the FlightTest Centre (EV) side of the A380, A330/A340, A320 (CEO & NEO), A350 & A400Mprograms.Scheduling, preparation and realization of the Operability Tests on the actualflying programs (A350, A380, LR, SA & A400M)Participate to the organization’s meetings as EV representative for the preparationof the future campaigns (NEO & A350)

• 

  Altran France

  Oct 2013 - Apr 2016

  Consultant - Aircraft Maintenance and Engineering

  Interface between Airbus (mainly A350/A320NEO M&O and Flight Test departments) and the team for all queries about Operational Scenario analysis of the A350 & A320NEO Operability Test Campaigns:• Planning and preparation of the Test Campaign• Participation to the Operability Tests (OTC)• After test actions and incorporation check• Project and KPI managementOther tasks on the frame of the project:• Redefinition of the way of handling the change of the failure message after MEL dispatch in the A350XWB documentation• Technical Data support for Development Flight Test Maintenance Department and Customer Service Engineering in the frame of the development campaigns (Field representation)• On Aircraft Validation (OAV) of Maintenance Procedures (part of the Tech Data V&V process)• In service issues analysis linked to the Tech Data • Participate to the Operability Tests (OTC) on A380. Show less

• 

  DERICHEBOURG aeronautics

  Apr 2016 - Jan 2021

  Within the production support department, I'm in charge to set up the tests through the experimental sketches (R00). The tests are either for the certification, product improvement, or production issue identification and fix.Main tasks :- Reception and treatment of the queries of the design office- Analysis of the need- Definition of the configuration of the aircraft configuration required for the test (mod, version, etc.)- Evaluation of the processes and tool to set up- Management of the resources and the logistic- Test coordination with the planning, production, manufacturing engineering, and quality departments- Technical assistance during tests- Putting the aircraft back o the original configuration Show less The aim of the FAL Customer Manager is, all along the assembly and delivery processes, to make sure that the customer is satisfied of the aircraft he will going to take delivery.- Assisting Customers during aircraft inspection on the Final Assembly Line and during delivery phase- Management of the CLB (Customer Log Book)- Management of the buy back sessions (representation of the issues after fix)- Manage all quality issues raised in relationship with the Design Office, Engineering and Aircraft Quality Conformance Management- Training of the newcomers : mentoring of the newcomers until they have reached the autonomy. This include, among other, the learning of the main processes used during assembly and acceptance, the customer relationship, the technical follow up of the A/C and the liaison with the different stakeholders.Lead for the matters related to the training and the standardization of the work and for future projects (development of IT tools, methods and policies) Show less

  • Production Support Engineer - Test Coordinator

    Aug 2020 - Jan 2021

  • A350 XWB FAL Customer Manager

    Apr 2016 - Jul 2020
• 

  DERICHEBOURG aeronautics

  Jul 2021 - Dec 2022

  Accountabilities:- Being accountable for any engines and nacelles subject in front of the Airlines- Focal point for Propulsion Quality topic in front of the Customer in Aircraft Delivery phase- In charge to address any engine and nacelle topics with support of suppliers and other Airbusfunctions- Provide a quality Feedback loop- Impulse continuous improvement in this domain- Derisking/closure of A/C milestones for open points under Propulsion Systems Procurement department responsibilityMain activities:- Present PowerPlant Systems to the Customer before delivery to FAL and manage associatedQLBs until closure.- Perform Liability review with suppliers- Follow QLBs raised by the Customer, QLB closure within leadtime- Address CSIP comments- Manage Propulsion Concessions (Quality Assessment DQ1 and Quality Decision DQ2signatories) and follow-up Propulsion nonconformance raised at Suppliers facilities including EngineMount- Manage QSR containment application- Address customer concerns during A/C delivery phase in close coordination with engine andnacelle suppliers and other functions within Airbus- Proactive management of Delivery Protection Board- Lead Practical Problem-Solving- Sign and Release the PID after customer inspections- Provide Voice of the Customer- Assess performance of Suppliers and transmit results to contract partners- Lead resolution of Propulsion quality issues with internal stakeholders to achieve CustomerSatisfaction- Issue quality KPI for Propulsion by analyzing defect raised during inspections (QIDS, QLB,reworks)- Identify quality issues detected during inspections and ensure Root Cause Analysis are managedby suppliers through POPx organization Show less Some engines are affected by a quality escape and my mission is to support an engine noria as part of thepropulsion systems procurement department. The support is provided to both Program and AssemblyLine which are the main internal stakeholder I’m dealing with.This includes the supervision and the monitoring of all the steps related to the supply and the preparationof replacement engines, the monitoring of the repair of the removed engines and the associated supplier.I’ve also build from scratch a monitoring system which allows simple day-to-day operation andmonitoring and which provide accurate and esay to understand Key Performance Indicators to the seniormanagement. Show less

  • A330 Propulsion System Delivery Quality and Customer Manager

    Nov 2021 - Dec 2022

  • Supply Chain & Quality Manager - Propulsion Systems

    Jul 2021 - Dec 2021
• 

  ALTEN

  Jan 2023 - Feb 2025

  The aim of the QCM - ISE is to investigate on issues happening in service and which could be linked to the manufacturing of the aircraft. The Team Leader is manager of a team in charge of the daily business and the quality of the deliverables.Main activities :- Manager of a team of 6 engineers (2 workpackages)- Management of the deliverables (on-time & on-quality objectives)- Management of the daily relation with the customer- Support the team for all aircraft/technic related questions- Investigation to confirm the issue detected is a manufacturing issue- Organising with different stakeholders (FAL & plants quality, supply chain quality) the necessary investigations and the resolution of the issues seen in service- Improvement of the process linked to the activity- Training of the team about the Airbus’ processes and tools- Supportto the commercial teams for the technical aspects of the Request For Proposal Show less

  • Cluster Leader for Event & SARI management on the A320/A330/A350 programs

    Jul 2024 - Feb 2025

  • Quality Conformance Manager for In Service Events & Team Leader

    Jan 2023 - Aug 2024
• 

  Rolls-Royce

  Feb 2025 - now

  Flight Line Officer / Propulsion System Manager