Mohammad Moni

Experience

• 

  Petromax refinery Ltd

  Feb 2013 - Mar 2014

  Operation Engineer

  1. Operate the plant from DCS panel.2. Observe the temperature and pressure of Heater, Compressor, Pumps, Reactors,Drums etc and take action accordingly.3. Saving the catalysts through smooth operation of plant.4. Maintain close co-ordination with field operator.5. Have to maintain a quick response in any kind of emergency.6. Collect and record the daily production report and inform to higher authority.7. Quality control of the products.8. Maintain a specified production rate.9. Ensure total safety of the plant.10. Follow the HES rules and regulations to keep the plant safe.11. Maintain firefighting unit up-to-date for any kind emergency situations.12. Prepare the injection package solution.13. Survey the activity of field operators frequently.14. Training the process operators.15. API Separator, DM water section (Reverse Osmosis method), Water softeningprocess, Degasified DM water treatment, Waste water treatment (BOD, COD), BoilerFeed water treatment section supervision. Show less

• 

  Hyundai Engineering Co. Ltd.

  Mar 2014 - Oct 2016

  Operations

  1. Operate the Gas Turbine Compressor.2. Maintain the gas flow according to demand.3. Maintain smooth operation from DCS(Distributed Control System).4. Observe all process parameters carefully.5. Follow the HES rules Sincerely.6. Observe the plant utility status.7. Observe all package (fire water pump, gas generator, emergency dieselgenerator) status.8. Confirm to all permit to work procedure in performing work tasks.9. Maintain the daily data sheet of process parameters.10. Actively participate in plant upgrade and modification activities.11. Observe and maintain oily water separation unit carefully.12. Conduct analytical investigations.13. Participate in failure investigation and root cause analyses.14. Perform statistical analytical data treatment. Show less

• 

  KEPCO KPS, Summit Meghnaghat Power Company Limited.

  Oct 2016 - Apr 2022

  1. Understand and adhere to all plant safety guidelines and procedures. 2. Control whole plant process and electrical distribution through plant control system (DCS) and other process control devices. 3. Perform electrical HV, MV & LV isolations & also mechanical isolations as per instruction of SCE/ CRE with proper safety. 4. Assist CRE in case of any emergency in control room by controlling HRSG drum level & monitoring all kinds of auxiliaries.5. Monitor the Gas Turbines Hydraulic Oil system, Lube oil system, Air intake system, compressor system etc. 6. Monitor the Transformers oil temperature, Coil temp, Forced cooling system etc. 7. Monitor the HRSG (Heat recovery steam generator) Boiler feed water pump, LP recirculation pump, Sampling analysis, Boiler Dosing system & Boiler water quality test. 8. Monitor the status of EDG (Emergency Diesel Generator) & emergency fire pump and do weekly test run. 9. Monitor the operation and performance of power block area equipment while on shift.10. Perform boiler water quality test and make corrections to the process as necessary. 11. Identify problems with plant equipment and clearly communicate the condition associated with these problems to the plant maintenance team. 12. Cooperate with other operation engineers, efficiency engineer, chemists and operation technicians to meet most safe, reliable and maximum efficient operation in the plant.13. Maintain clean and safe equipment, control room, field operation buildings and plant environment. 14. Proactively participate in and contribute to the ISO 14001 and OSHAS 18001 programs. 15. Making of RCA report of any kind of plant related problems. Show less 1. Understand and adheres to all plant safety guidelines and procedures & strives to maintain an injury free environment. 2. Monitoring the following process but not limited to: i) Water Intake system: Trash Rake Operation, Band Screen Operation, Circulating Water pumps, Chlorination system ii) Raw water Treatment system: Clarifier operation, Chemical Dosing system, Pressure Filter, Potable water system, Raw water, Service water& potable water storage system, Chemistry control and analysis of raw water & potable water iii) Demineralization System: Activated Carbon filter operation, Cation, Anion & MBP operation, Demineralization water storage & supply system, Acid & caustic unloading & storage, DM water chemistry control & analysis. iv) Waste water treatment system: Waste water storage & mixing system, chemical dosing system, chemical treatment system & sedimentation basin, Effluent discharge system v) Closed Cooling water system: Closed cooling water pumps, heat exchangers 3. Performs chemical delivery off loads and tank/product inventory. 4. Monitors the operation and performance of BOP area while on shift. Read, interpret and adjust meters and gauges to make sure plant equipment is operating properly. 5. Identifies problems with plant equipment and clearly communicates the conditions associated with these problems to the plant maintenance group. 6. Cooperate with other operation engineers, efficiency engineer, chemists and operation technicians to meet most safe, reliable and minimum efficient operation in the plant. 7. Develop and follow procedures of optimum operation for most safe, reliable and maximum efficient operation in the plant. 8. Maintain clean and safe equipment, control room, field operation buildings, and plant environment. 9. Assists in the update of drawing and prints as changes are made. 10. Provide leadership and job coordination on critical repairs or projects. 11. Follow all kind of company regulations and rules including HSE. Show less

  • Deputy Manager(Power Block Engineer)

    Jul 2019 - Apr 2022

  • Assistant Engineer(Balance of Plant Engineer)

    Oct 2016 - Jun 2019
• 

  China national electric power Engineering & services co. Ltd

  Apr 2022 - now

  Manager(Control Room Engineer)

  1. 335 MW CCPP(Combined Cycle Power Plant) Reliable Operation, startup & safe shutdown with two GE 9E Gas Turbine, two vertical dual pressure 80bar/500°C HRSG (Hang Zhou) & Harbin 126MW Steam Turbine from Central Control Room(CCR).2. 2*123MW Gas turbine control with Mark vie, 126MW Steam turbine control with ABB Symphony DEH, HRSG boiler, single bus with bypass Switchyard control with SCADA: SAS-600 and other plant auxiliaries control with DCS.3. Coordinate with MMD, EMD, I&C & other department regarding Work request, Work permit in CMMS, ensure proper LOTO isolation, Hazard management, safety etc. during maintenance and CI, HGPI, BI, MI works.4. Closely Monitor, Analyze, Record data Log, prepare startup, shutdown, incident, RCA, Availability, Daily & Monthly report etc.5. Liaison with BPDB, NLDC, Titas, BPSC regarding Plant availability, yearly DCT, NG Fuel, Diesel Fuel etc.6. Train, Motivate, Guide, Support and maintain harmony between other shift members. Support Shift Charge Engineer during any kind of Emergency situation and making sure of accident free smooth plant operation.7. Maintain safety standards and ISO 9001, ISO 14001 & ISO45001 standards.8. Making GT tripping reason for RCA report & analysis it prior to finding the problems.9. Guide designated person to isolate properly before issuing any PTW.10. Conduct emergency mock drill as lead commander such as Fire mock drill, Earthquake evacuation mock drill, Chlorine leakage mock drill, Chemical spillage mock drill, Oil spillage mock drill etc.11. Conduct daily, weekly, monthly & yearly operation scheduled work and making sure of plant safe operation.12. Take lead part in operation related training & presentation program.13. Guide shift members for conducting monthly inspection such as workplace inspection, emergency equipment inspection, shower & eyewash, SCBA etc. Show less