SAHEB YADAV

Experience

• 

  VELBHAM CONSTRUCTION

  Jun 2013 - Dec 2013

  Mechanical Supervisor

  • Preservation of the material.• Familiar with welding inspection i.e. before welding, during and after welding.• Monitoring of various welding process like GTAW, SMAW and GMAW etc.• To ensure all fabrication works comply with relevant project specification and classification requirement.• Ensure the accurate calibration records are maintained for all welding machines, inspecting and testing instruments for use.• Conduct meeting with welders & fabricators to ensure the client and project requirements.• Monitoring welding as per approved WPS. Show less

• 

  DHAVAL ENGINEERING COMPANY

  Jan 2014 - Feb 2015

  QC INSPECTOR (WELDING/PIPING)

  • Verify the traceability records and correct materials used as per the latest approved drawings before fabrication.• Initiate to raise RFI for stage wise inspection as per latest approved inspection test plan to the contractor / company.• Responsible for the verification of storage and preservation of project materials as per project specification.• Check weld joint preparation like root Gap, root face and bevel angle, misalignment, cleanliness as approved WPS and project specification.• During test pack line Shall be checked completely with latest approved drawings and ensure all joints welded and necessary NDE is completed, if any NDE is outstanding shall be notified to the NDE coordinator.• Issue punch list and follow-up.• Discussing piping related quality issues such as NCR’s and explains corrective actions taken in the toolbox meeting. Show less

• 

  Petron Engineering Construction Limited

  Mar 2015 - Jan 2016

  QC INSPECTOR (WELDING/PIPING)

  • Review and evaluate drawings on plan, isometric and P&ID for monitoring and inspection.• Conduct inspection on the installation package for clearing and acceptance.• Check, verify / review, fabricated / erected or installed lines as per latest ISO drawings for construction.• Check and inspect the gaskets, support, valve, prior to line reinstatement acceptance as per latest drawing for construction specification and standards.• Issue punch list on lines that requires so, monitor and supervise reinstatement.• Inspecting the fabrications, installation and hydro testing of pipelines.• Verify correct type of material has been fabricated, correct orientation and dimensions of spools as per approved isometric drawings.• Check the as-built drawings on any modification made on site.• Perform quality control punch listing and clearing prior to hydro test and pneumatic Test schedule. Show less

• 

  Consolidated Contractors International Company

  Feb 2016 - Jun 2019

  •Inspection activities related to quality assurance and control in new construction of Oil/Gas and Petrochemical facilities, prefabrication of process piping, field erected piping, erection/installation, and fabrication/erection of pipe racks and steel structures.•Inspection proficiency in welding, NDT, PWHT, PMI, HARDNESS and Pressure test.•Review of Subcontractor Quality procedures and Inspection test plans.•Conversant with international codes and standards (ASME, API, AWS, ASTM etc.)•Conversant with most of the materials used in oil/Gas and petrochemical industries. (CS, low alloy steels, LTCS, austenitic stainless steel, DSS, CuNi etc.)•Witness welding procedure qualification and welder performance qualification test and relevant NDT & destructive testing in accordance with applicable international code and standards•Review of PQR, Non-destructive and Destructive testing reports related to procedure and performance qualification. Review of welder qualification test Certificates and welder cards.•Evaluate and approve welders, NDT technicians, for the project.•Inspect project materials and welding consumables construction activities.•Surveillance on piping works, welding and NDT activities. Review of NDT (LPT, MPT, RT, and PMI), PWHT, Hardness test reports and welding reports.•Report any safety violations, unsafe practices, spills, incidents or near misses Show less • Daily joint Fit-up inspection for proper root gap, bevel angle, checking proper preheat has been maintained prior to start of welding, checking with isometric drawing for proper orientation and giving clearance for welding.• Post welding visual inspection of completed weld joints.• NDT inspection of RT, MT, PT hardness testing and PMI witnessing along with review of reports.• Selection of welded joint for RT on weekly basis as per piping class and welder numbers.• Inspection of joint configuration prior to weld as per WPS and final weld profile.• Conducting tool box meeting with the QC’s, welders, fabricators and safety personnel.• Ensure that accurate calibration records are maintained for all welding machines and testing instruments for use. Show less

  • QC INSPECTOR WELDING

    May 2016 - Jun 2019

  • QC INSPECTOR WELDING

    Feb 2016 - May 2016
• 

  Engineers India Limited

  Nov 2019 - Feb 2023

  Senior Engineer (Welding/NDT)

  • Surveillance and witnessing of Daily Construction Activities as per ITP.• Attending Weekly QA/QC Meeting.• Co-ordination with client QA/QC.• Review and punch listing of Pressure Test Package.• To prepare Job procedures and WPS for piping, tankage and structural works as per project specifications.• Experience of preparing, running and witnessing PQR, WPS and Welder qualification test as per ASME, other applicable codes.• Witnessing procedures tests and certify the results.• Verifying Incoming Material test certificates for welding consumable & raw materials.• Participate in audit from client side to contractor(Auditee).• Monitor & Control the Sub Contractors activities and their quality performance.• Carry out Radiographic interpretation, MPI & DPI.• Controlling Welding Consumables handling procedures and equipment’s calibration.• PWHT Chart Review, Hardness testing, & PMI testing.• Interpretation of Radiography film as per ASMEB31.3, SEC IX, SEC V, SEC VIII DEV. I & API 650.• NDT clearance of piping test pack.• Inspection & monitoring of welding activities in accordance with ASME B31.3, API 650, and Project approved procedure and specification Show less

• 

  ADNOC Group

  Feb 2023 - now

  Inspection Engineer