Experience

• 

  Lalpir & pakgen power limited

  Oct 2011 - Oct 2012

  Mechanical engineer

  Plant specifications:2 x 365 MW Single Reheat Condensing Tandem Two-cylinder Double Flow Exhaust Steam Turbines (Mitsubishi) and Generators (Parsons)2 x 1200 Tons/hr, Forced Circulation Radiant Reheat Type Boilers (Mitsubishi) having HSFO as fuel.220KV, 11KV, 6.6KV & 440V Switchyard Operation.16 Cells of Mechanical Induced Draft Counter Flow Cooling Towers.Water Treatment Section comprises of Reverse Osmosis units, Demin Trains, Clarifiers, De-carbonators.Job Responsibilities:Responsible for assisting the area engineer in trouble shooting, routine operation, maintenance, startup and shutdown of the plant.Responsible for conducting day-to-day operational and maintenance activities along with the Mechanical Maintenance and E&I departments.Responsible for conducting and record keeping of weekly safe operations different systems and axillaries. Familiar with the lock out tag out (LOTO) procedure required for isolation of equipment for maintenance. Responsible for conducting and record keeping of weekly safe operation tests in the turbine, boiler and water treatment section.Responsible for reporting near Misses, Unsafe acts and unsafe conditions within the plant area to the Safety Manager.Team member for the Installation Project of HSFO HOMOGENIZER. Team member for the Installation Project of VVVFD’s for FORCED DRAFT FANS and GAS RECIRCULATION FANS. Operation & Maintenance of pumps and multi stage compressor.Worked as a Team member in Efficiency Improvement of Cooling Tower with SPIG ITALY.Attended major outage of PAKGEN Unit 365MW as Maintenance Engineer of overhauling of Steam Turbine (Type – TC2F 33.5).  Responsible for installation of ACC seals in dummy piston.Responsible for Lapping of GV’s and MSV’s.Responsible for the replacement of last stage blades of LP Turbine.Responsible for the alignment and installments of new Bearings,Thrust bearing and Turbine rotor. Show less

• 

  Kohinoor textile mills limited - kohinoor genertek division

  Aug 2013 - Apr 2014

  Mechanical engineer

  Plant Specifications 8 MW Solar Turbo Mach Gas Turbine Taurus T-70 with HRSG having capacity of 14TPH. 1900 m3/hr./20bar Enerproject SA Gas Compressor. 3 x 5.96MW Nigatta 18V32CLX HSD/HSFO Fired Engine. 3 x 1.96MW CAT 3520C Gas Fired Engine. HSFO and Lube Oil Purifiers Alfa Laval.Job Responsibilities Basic monitoring day-to-day maintenance activity in plant & maintaining daily log book for the same. Monitoring spare cost incurred during maintenance month wise.  Maintenance and Overhauling of Centrifugal Pumps, Gear Pumps, Heat Exchangers Plate type and Shell and tube type, HSFO and L.O Purifiers & various types of Valves. Managed the Top End Maintenance, in frame Maintenance & Major Overhauling of Nigatta and CAT Engines. Show less

• 

  Descon engineering ltd.

  May 2014 - Mar 2015

  Erection & commissioning engineer / field mechanical engineer

  Job Responsibilities Responsible for Erection, Commissioning & Maintenance of Turbine & Boiler. Responsible for checking Foundation on all Levels & Marking of Centerlines. Responsible for Placement Turbine, Generator, Condenser & Exhaust Bellow. Responsible for Alignment of Turbine to Generator & its Grouting. Responsible for Installation, Testing & Commissioning of Turbine and its Auxiliaries. Responsible for Testing & Calibration of L.O System, Control Oil System, Turbine Governing System, Vacuum Pulling System, Over Speed Trip Test & Full Electrical Load Test. Studying scope of Piping Layout,P & ID, Isometric Drawings & Prepare BOQ’s & Review Method of statement, Specification & standard of materials. (Pipes, Fittings, Gaskets, etc). Ensures all the work done in according with the approved Technical Drawings, Contract Documents, Project Specifications & all applicable standards whether National and International Standards. Manages directly & provide Engineering & Technical support to all Mechanical Teams at site. Plan the execution of Mechanical work & coordinate with the Electrical & Civil Team. Estimates, Prepare & Assign the resources such as man power, material, consumables, equipment, tools, etc. required for the execution of the job. Client & Vendor correspondences to resolve critical issues & bottle necks during the Erection & Commissioning of Power Plant (Boiler, Turbine & Auxiliary System & Associated Piping work).  Attends regular meetings with the Client, Vendor & Consultant to provide update on project progress. Assigns targets for accomplishments & ensure targets are met on daily basis for all teams i.e. Mechanical, Electrical & Civil. Ensuring Health, Environment & Safety compliance in every area & reporting as advised in the site deployment briefing. Well conversant with the applied international standards of material specification & codes i.e. ASME, API, ASTM, ANSI, etc. Show less

• 

  Sitara chemical industries limited - coal fired power plant 90mw

  Mar 2015 - Apr 2017

  Assistant manager mechanical (o&m)

  Plant specifications: 40MW High Temperature & High Pressure Single Casing Extraction Condensing Steam Turbine HNK 50/80/32 (HTC - SIEMENS) and Generator (JPEC). 150 Tons/hr. Circulation Fluidized Bed Combustion (CFBC) Natural Circulation Coal Fired Boiler (WUXI). 03 Cells of Mechanical Induced Draft Counter Flow Cooling Towers. Water Treatment Section compromises of Reverse Osmosis units, Demin Trains, Electric De-Ionization Units.

• 

  Fatima fertilizer company limited

  Apr 2017 - now

  Plant specifications: 2 x 60MW High Temperature & High Pressure Single Casing Extraction Condensing Steam Turbine Type: SST-600 / CEH 63/4.0 (SIEMENS) and Generator (SIEMENS). 2 x 220 TPH / 90 bar / 535oC Natural Circulation, Travelling Grate (Detroit Stoker) Coal / Bagasse Fired Boiler (AMEC FOSTER WHEELER). 2 x 4 Cells of Mechanical Induced Draft Counter Flow Cooling Towers. 2 x 45m3/hr Water Treatment Section compromises of Reverse Osmosis units, Demin Trains, Electric De-Ionization Units. Show less

  • Team lead Rotating Equipment - Ammonia, Urea & Nitric Acid Plants

    May 2021 - now

  • Lead Rotating Equipment Engineer / Lead Machinery Engineer - Ammonia & Urea Plant

    Apr 2020 - May 2021

  • Engineer I - Mechanical

    Apr 2017 - Apr 2020