Experience

• 

  Intercity electrical installations llc

  Sept 2012 - Apr 2015

  Electrical engineer

  ✓ Preparation of Electrical Engineering LV & HV shop drawings as per Dubai Electricity & Water Authority (DEWA) regulations & standards.✓ DEWA approval based on Fit-out work , Additional NOC , Zero load NOC and Getting Electricity and water Authority.✓ Liaising with DEWA for Drawing Approval, Technical Clarification, Site Inspection & Release of supply.✓ Coordinating with clients, consultants and contractors during the execution of projects.✓ Site survey, estimation and planning, preparation of BOQ.✓ Preparation of Lighting layout, power layout and single line diagrams for power distribution as per DEWA, site condition and customers requirement.✓ Preparation of load distribution schedule as per the shop drawings.✓ Erection and maintenance of LV Panels, MDB, SMDB, DB & Capacitor Banks.✓ Electrical fit out works for shops, restaurants, offices etc.✓ Industrial wiring and installation works for factories and cold storage warehouses.✓ Installation of Motion sensors for lighting in offices, shops etc.✓ Electrical supervision works including arrangement of materials (inventory) for the execution of the project as per site requirement and coordination with Electricians.✓ Preparation of Tel-Data layout & schematic diagrams as per local Authority. Show less

• 

  Advance vision company

  Jun 2015 - Apr 2018

  Electrical engineer

  ✓ Working alongside with Quantity Surveyors for Material Take-Off of Electrical Systems Prepare comparison sheets of different suppliers for all MEP equipment’s.✓ Floating RFP and getting quotations for all MEP equipments and items for projects Being tendered.✓ Interpret and review tender drawings to identify any difference to tender requirements and raise queries against specifications.✓ Review scope of work, BOQ, drawings and specifications of the project to be tendered and discuss the feasibility of the project with the Estimation Manager.✓ Preparing Tender Queries to consultants/clients for clarifying or collecting any missing data.✓ Preliminary design of MEP systems for Design and Build projects. Build relationship with internal departments and external suppliers, vendors & sub-contractors for the daily correspondence of tender works.✓ Performing basic design and Engineering calculations for various Electrical systems like Load calculation, Transformer sizing, Generator sizing, Circuit breaker sizing, Capacitor bank sizing, voltage drop, cable sizing, cable tray, Bus bar trunking and Earthing & Lightning protection system etc.✓ Responsible for preparation of Lighting, power, containment, ELV layout and Load Schedule Diagram.✓ Quantity take-off for all HVAC, Electrical, Plumbing and Fire alarm and Fire fighting Systems from the consultant /tender drawings.✓ Analyse the Revit MEP drawings and, performing Clash Detection in Navisworks and Quantity take off comparisons.✓ Preparation of contract variations and Interim claims for the project.✓ Reviewing of Method Statements, Material Submittals for the projects.✓ Familiar with the various standards like IEC, BS EN, NEMA, NFPA, Ingress protection (IP ratings) and local authorities’ requirements for Electrical-mechanical works.✓ Ensure the works carried out by contractor are meet to the procedure, specification, drawing and quality standards. Show less

• 

  Aktor sa

  May 2018 - Feb 2019

  Electrical engineer

  ✓ Quantity take-off for all HVAC, Electrical, Plumbing and Fire alarm and Fire fighting Systems from the consultant /tender drawings.✓ Preparation of contract variations and Interim claims for the project.✓ Preparation and reviewing of testing & commissioning reports, Method Statements & Material Submittals for the projects.✓ Preparation of RFI for clearance of details from Client/Consultant.✓ Familiar with the various standards like Kahraama, QCS, IEC, BS EN, NEMA, NFPA, Ingress protection (IP ratings) and local authorities’ requirements for Electrical, mechanical works.✓ Ensure the works carried out by contractor are meet to the procedure, specification, drawing and quality standards.✓ Performing basic design and Engineering calculations for various Electrical systems like Load calculation, Transformer sizing, Generator sizing, Circuit breaker sizing, Capacitor bank sizing, voltage drop, cable sizing, cable tray, Bus bar trunking and Earthing & Lightning protection system etc.✓ Responsible for preparation & approval of Lighting, power, containment, ELV layout(Public addressable system, CCTV, Telephone & Data, Fire Alarm) and Load Schedule Diagram.✓ Good communication skills to co-ordinate with working team, sub-contractors and client to carry out the activities efficiently and smoothly.✓ Attending Meetings, Preparing DPR and getting required clearances from Clients. Show less

• 

  Tata consulting engineers limited

  Feb 2021 - Mar 2022

  Design consultant

  ✓ Attending meeting with Owner (Principle Client), PMC team, Consultant team.✓ Understand and apply NBC, Indian Electrical Act, Indian Electrical Code, NEC, NFPA, and other local and international codes.✓ Studying the IFC drawings provided by consultant/owner and finding out gaps/missing elements / missing information /discrepancies, etc in the drawings which are required for execution, but not shown on drawing.✓ Review of documents/drawings/model w.r.t. constructability, buildability & any interface related design issues.✓ Raising RFI for any queries to client & getting clarified in view of resolving any ambiguity in design/drawings or for any missing data.✓ Electrical design elements i.e. LV / MV Distribution and single line drawings, Earthing and bonding, Lighting, Cable management system, Building power designs, Load estimation, Fire alarm, security, BMS and DG systems.✓ Review of documents/drawings prepared by engineer/designer and ensure compliance in all respects in line with contractual or relevant standards before issue.✓ Review of vendor design documents & drawings to meet employer requirements, specifications & getting the approval of same from client.✓ Review of vendor related shop drawings w.r.t. Consultant drawings. Supporting revit modeler for development of model & delivery of shop drawings.✓ Review of 3D Models being prepared by revit modellers on Navisworks, for correctness and clash resolutions with other disciplines, Coordination with other discipline & vendor related works so as not to have any clash or mistakes or missing in shop drawings✓ Follow-up/discussion with vendor for timely deliverable of their respective documents, drawings, technical submittal, material approval submission etc which shall allow site.✓ Providing inputs to 3D Modelling team, for updates of site decisions, modification being done, or site conditions, for implementing corrections in 3D model. Show less

• 

  Listenlights pvt. ltd.

  Jun 2022 - Aug 2023

  Design manager

  ✓ Attending meeting with Owner (Principle Client), PMC team, Consultant team.✓ Understand and apply NBC, Indian Electrical Act, Indian Electrical Code, NEC, NFPA, and other local and international codes.✓ Studying the IFC drawings provided by consultant/owner and finding out gaps/missing elements / missing information /discrepancies, etc in the drawings which are required for execution, but not shown on drawing.✓ Review of documents/drawings/model w.r.t. constructability, buildability & any interface related design issues.✓ Raising RFI for any queries to client & getting clarified in view of resolving any ambiguity in design/drawings or for any missing data.✓ Electrical design elements i.e. LV / MV Distribution and single line drawings, Earthing and bonding, Lighting, Cable management system, Building power designs, Load estimation, Fire alarm, security, BMS and DG systems.✓ Review of documents/drawings prepared by engineer/designer and ensure compliance in all respects in line with contractual or relevant standards before issue.✓ Review of vendor design documents & drawings to meet employer requirements, specifications & getting the approval of same from client.✓ Review of vendor related shop drawings w.r.t. Consultant drawings. Supporting revit modeler for development of model & delivery of shop drawings.✓ Review of 3D Models being prepared by revit modellers on Navisworks, for correctness and clash resolutions with other disciplines, Coordination with other discipline & vendor related works so as not to have any clash or mistakes or missing in shop drawings✓ Follow-up/discussion with vendor for timely deliverable of their respective documents, drawings, technical submittal, material approval submission etc which shall allow site.✓ Providing inputs to 3D Modelling team, for updates of site decisions, modification being done, or site conditions, for implementing corrections in 3D model. Show less