Faraz Uddin A.

Experience

• 

  Zishan Engineers (Pvt.) Ltd

  Dec 2008 - Nov 2011

  Mechanical Engineer

  Projects Handled: Enar Petroleum Refining Facility - II Client: EPRF  Design verification, Field engineering & box up activities for static equipment & Piping.  Verification of design calculations for Crude Oil, Naphtha and FW Storage Tanks. Engineering Services for 30” x 50 KM 12” x 30 KM OMU to Lekki Gas Pipeline Project Client: Dangote Industries, Nigeria  Design Review of GA & Fabrication drawings of Scrubber, Filter Separators & Pig Traps.  OMNI Power Plant Client: Orient Energy System. (OES)  Stress Analysis of cooling water pumps piping & Exhaust pipe of 3.7 MW Gas Engine. Design & Detailed Engineering of associated Storage tanks & Pressure Vessels.  Farha / Saiwan Oil & Gas Fields Development Project-OMAN Client: AL-Mushrafi  Design & Detailing of Chemical Injection Vessels skids including piping & cost estimates. Haseeb Gas Field Development Project Client: Haseeb Gas Field  Adequacy check & verification of FEED & Detailed engineering documents pertains to gas processing Plant  QICT Terminal-2 Electrical Works Client: OES  Development of Data sheet, GA & Fabrication drawing of Diesel Day tank. Development of layout Miscellaneous works at KTPS CCPP Korangi Creek Client: OES  FEED & Detailed engineering of Knock out vessels and Intercooler piping of Fuel Gas Compressors driven by Gas Turbines. Revamping & modification of existing Fire Water system compliance to NFPA 20.  Client: M/s Technomen & M/s Tapal Energy  FEED & Detailed Engineering of Static equipment and piping related to Fuel, cooling water and Oily water and Sludge systems of thermal power plant (80 MW). BYCO Revamping & Up gradation of Oil Refinery- ORC-2 (150,000 BPD) Client: BYCO Pakistan  MTO for various units of Oil Refinery & Chemical Plant. FEED & Detailed Engineering of Storage tanks & Pressure Vessels.  90-MW Power Plant (KGTPS – K.E) Client: OES  FEED & Detailed Engineering of Piping & Pressure Vessels, Show less

• 

  ENAR Petrotech Service Pvt. Ltd.

  Oct 2011 - Jun 2014

  Project Manager/Lead Mechanical Engineer

  KEY PROJECTS:1. Aadhi LPG/NGL Recovery Plant IIIClient: PPLPreparation of Tender document and Technical Bid evaluation of Siemens & Solar for Gas turbine driven power generation system with waste heat recovery unit. Review of Engineering documents as owner’s engineer representative generated by EPCC contractor, document includes LPG Bullets GA & Fabrication drawings, Plot plans, Piping layouts, Piping materials specifications & Datasheets etc.2. UCH-II Gas Field Development Project Client: OGDCLProject Cost is 200 M USD, Design review & detailed engineering of following packages. Dehydration (Modular skids) Power generation (15 MWe)Waste Heat Recovery Unit (80 MMBTU/HR)Hot oil package (60 MMBTU/HR) Flowline materials. Utilities & Hot Oil Package.Preparation of tender document and technical bid evaluation to hire the services of PC Contractor.3. Rehmat Gas Plant Optimization Client: OMVUpdating of Plot plans, piping material specifications. Pipeline calculations and development of Alignment sheets. Review of existing condensate/ produced water handling system at Kadenwari & Rehmat Gas plants. Cost Estimates of Flow line, Pressure vessels & Storage Tanks. 4. Evaluation, Revalidation of Sui Field Compression Project Client: PPLEvaluation of existing equipment and Piping including slug catchers, scrubbers, Air coolers to confirm the adequacy for revised operating parameters after revamp of SML (Sui Main Limestone) turbo-compressors.5. Mehar off spec Condensate recovery Project Client: OMVUpdating of equipment layout. Development of Storage tank specifications & datasheets.6. Wellhead Compression for Tajjal-01 & Tajjal-04 Client: OMVWorked as PROJECT MANAGER, detailed engg of wellhead piping. Stress analysis of piping including Wellhead cooler, compressor & Flow line.7. Wellhead Development of Sawan North Horizontal-1 Project Client: OMVWorked as PROJECT MANAGER. Detailed engg of Wellhead piping,Flow line & its stress analysis. Show less

• 

  FFBL

  Jun 2014 - May 2017

  Assistant Manager Projects & Head Maintenance

  Working in Project Management Unit. Responsibilities are as follows:Preparation of Scope of Works, RFQ’s, Bid Evaluation, Design Review & Installation supervision of utilities & process equipment.Engineering of variety of static equipment. Ensure maintainability of plant Static & Rotary equipment thru preventive and corrective maintenance and arrange necessary spare parts required for the continuous & reliable operation of the plant.Engineering Staffing Plan.

• 

  OMS Private Limited

  Jun 2017 - Feb 2018

  Mechanical Manager

  Review of feasibility reports of Combine Cycle Power Plants CCPP projects for various IPP’s & K-Electric projects. Preparation & Review of Tender documents & Techno-Commercial Bid evaluation of EPC bidders for 250 MW IPP's project based on MAN & Wartsila Dual Fuel Engines. Design & Detailed Engineering of Static Equipment including Boilers & allied static equipment. Provide Training for the design, operation & maintenance of Steam Turbines & its control systems, Gas Turbines & Boilers etc. to representatives of Sugar Industry under the program of Switch Asia, HP Cogen-Pak. Trained & lead the team of mechanical & process engineers for static equipment design such as pressure vessels, Condensers, Air Cooled Heat Exchangers & Storage TanksProvide Training on Power Generation equipment for the design, operation & maintenance of Steam Turbines & its control systems, Gas Turbines & Boilers etc. Show less

• 

  SUI SOUTHERN GAS COMPANY

  Feb 2018 - Aug 2020

  Sr. Mechanical Engineer-Desgin

  Preparation of SOW & Bid evaluation for Static equipment utilized in Pipeline & Review of GA, Fabrication drawings & Design calculations for Vertical Scrubbers & Horizontal Filter Separators, Pig Launcher & Receivers, Ultrasonic Flow metering Skids and Vent Stacks.To ensure construction of Pipeline installation & Site supervision works for new & ongoing projects as per designPerform following Design Calculations as per relevant codes/standards Engineering Practices for various pipeline projects.  Pipeline/Piping Bends Thickness Calculations.  Road Track & Crossing Calculations.  Upheaval Buckling Calculations.  Permissible Elastic Bend Radius Calculations  Bearing Pressure Buoyancy. To augment Simulation, Construction & CAD departments by providing design data for various projects. Coordination with project stake holders including Statutory & Regulatory Bodies. List of Projects:  42” dia x 371 Km long RLNG Project  30” x 125 Km Pipeline Project  12” x 46 Km POGC Rehman Gas pipeline Project  12” x 350 Km Quetta Pipeline Rehabilitation Project  Development of New Sales Metering Station at Hyderabad. Show less

• 

  Cnergyico Pk Limited

  Nov 2020 - Jun 2023

  Manager Design-Equipment & Piping

  Involved in Projects related to replacement and upgrading of the existing Platforming and Stacked Reactors. Reactors are designed and constructed as per Licensor technology.Performed detailed engineering for Fixed Roof and Internal and External Floating Roof Storage Tanks.Performed/Involved in following activities as part of FEED & Detailed Engineering Interface for project named Upgrade-1 to convert furnace oil into Euro 5/6 petrol and diesel.1. In house development of FEED package for (KHT/DHT & SRU units and Hook ups with existing refinery), and arrange verification and validation from the licensor. 2. Perform and arrange (if required) detailed Engineering of Process units and different Packages of refinery and ongoing projects.3. Mechanical Design of Pressure Vessels, Columns, Reactors, Fin Fan Coolers using PV elite software and Inhouse developed Excel sheets. 4. Engineering of Rotary Equipment (Pumps, Compressors, Gas Turbines etc.) and Allied Piping and associated Pipe Racks.5. Process Safety Studies. 6. Calculate Project Cost, Bid Evaluations, Pre-Bid Qualifications & Feasibility Studies.7. Management of Change. (Existing Refinery and New Projects)8. 3D Modeling of Plant using latest Software.9. Thermal design and Rating of Shell & Tube Heat Exchangers using Aspen EDR software and Inhouse developed Excel Sheets.10. Manhour estimation for detailed engineering works.11. Project Close Out. Show less

• 

  ILF Consulting Engineers

  Feb 2023 - now

  Principal Engineer Mechanical-Static

  My Job Role includes but not limited to following projects located mainly UAE etc. Development of FEED Datasheets, Specifications, Basis of Design, Material Requisitions related to static equipment such as Slug Catcher, Degasser, Dehydrator, Desalter, Stripper Tower, Vapor Recovery unit, Heat Exchangers, Flare Stacks, Wash Water Tanks and Crude Storage Tanks. Review & Update of Material selection Reports. Perform Vendor Bid Evaluation for various packages Preparation of EPC Scope of Work Review of Design calculations, GA & Fabrication drawings for Vent stack. FEED and Detailing of Cyclone and Horizontal Filter Separators. FEED and Detailed Engineering for LPG Storage Spheres for EPC Contractor,  Mechanical adequacy check of existing static equipment such as Separators & Pig traps etc for Offshore. Development of Mechanical Design Basis for offshore. Development of Mechanical Datasheet and Specifications for Chemical Injection Package for offshore. Show less