Experience

• 

  Encotec

  Feb 2004 - May 2011

  Project engineer/ welding engineer/ senior welding inspector level 3(cswip 3.2.2)

  Whilst not on site projects, as a permanent employee of Encotec, my time was spent in the company workshop facilities on preparatory work for assigned projects.Projects:GAS CONDENSATE TRANSPORTATION FACILITIES (September – December 2010, AZERBAIJAN)NICO STAND-ALONE SD CONDENSATE OFF-TAKE FACILITIES incl. 8 inches pipeline -2km, pig launcher facilities, metering skid facilities etc. (September 2009 – September 2010 AZERBAIJAN)REPLACEMENT FABRICATION WORK SHOP, Offshore Container for Amec (March – September 2009, AZERBAIJAN)BTC EXPANSION PROJECT 1.2 (June – December 2008, AZERBAIJAN)Design & Construction of Tank Truck Loading/Unloading Facilities (August – November 2007, AZERBAIJAN)Sangachal Terminal HDPE Pipeline for Loading Gantry (11” & 8”; 1 km) ()KARASU Produced Water Transportation Project. Unloading Gantry & Pump Station()SCP GEORGIAN GAS OFF-TAKE PIPELINE PROJECT with 30 inches, 12km pipeline (May 2006 – January 2007, GEORGIA)AZT/BTC 001 Sangachal Interconnecting Pipeline (30 inches, 12km) (August – December 2005, AZERBAIJAN)EXM-AZT Sangachal Interconnecting Pipeline (16 inches, 12km) (March – July 2005, AZERBAIJAN)AGT”BTC Pipelines and Facilities Installation Project”, PS-A2 at Yevlakh & IP-A1 at Kurdemir (February 2004 – March 2005, AZERBAIJAN) Show less

• 

  Marashstroy

  Apr 2011 - Mar 2014

  Welding engineer

  IKRA project, PVC plant in Kstovo, Russia (RussVinil (Sibur Neftehim & SolVin), Technip)Duty: Construction of Underground Network including CS and HDPE pipelines (pressurized and gravity flow) and pits.• Preparing required permissions, such as SRO, Work Permits, NAKS Certificates, WPQ, PPR, Project procedures, WPS, etc.• Liaison with the CPY• Planning of work• Approving of Technical Query solution with CPY• Approving of construction material with CPY and control over it applying • Issuing and approving of Method Statements and other project procedures.• Selection, purchasing and monitoring of properly using of Equipment such as welding machines and it spare parts • Calculation, selection, purchasing and control of materials supplied by subcontractor such as consumables, special cement mixtures, any waterproofing/waterstops, inserts plates, anchor bolts and etc.• Delivering of construction material (pipes&fittings, equipment, steel structures etc.,), from CPY warehouse to the construction site as per tolling scheme. Handling of material requests, invoices М-15, ОС-15, etc.• Transportation to construction site, loading/unloading operation, installation of vessels and other oversized equipment and grouting underneath.• Opening work permits for civil/piping, hot and spark potential, confined space, energy isolation, radiography etc.• WPS qualification (РД, РАД, КО, ОХНВП, СК)• Welders qualification (PB-03-273-99)• Underground network installation –CS and HDPE piping, gravity flow lines(PVC & RCP), pits/manholes• Control over welding of piping spool and installation as per PB 03-585-03. • Steel structures erection (high strength bolts, dynamometric keys)• Earth work • Civil: fabrication of pipe rack columns, foundations, pits, etc. Cast in situ and precast. Installations inserts plates, anchor bolts, waterstops, collars etc.• Preparing as build documentation, handover to CPY (acts of hidden works, as build drawings, logbooks etc.) Show less

• 

  Amec foster wheeler

  Apr 2014 - Dec 2016

  Qa/qc welding inspector

  ECMS Onshore ProjectDuty: •Insure contractor’s fabrication and inspection activities comply with specified quality requirements•Promote the culture of getting it right at first time•Provide constructive feedback in order to improve inspection process at contractor work sites•Constructively challenge existing methods of work and suggest suitable alternative•Aimed at process improvement•Monitor and report quality issues and proactively expedite trough the project team• Check material certification at ASCO SPS warehouse and release for issue in PaMMs database • Perform material receipt inspection and certification review at supervised Contractors • Raise non-conformance reports (NCR) for material certification issues • Carry out inspection activities as indicated on approved ITPs for material control, structural & piping fabrication, pressure testing, surface preparation & coating • Review and approve supervised Contractors fabrication dossiers • Maintain and issue Fabrication Register • Liaise with AGT Category B Project Engineer to resolve quality related issues • Prepare and issue a weekly Fabrication Inspection Report •Input to GOC requirements where necessary•Verify and witness testing activities where required•Raise non-conformances and resolve with subcontractors as required•Monitor subcontractor’s level of quality performance•Advise on areas of improvement in general Show less

• 

  Swift engineering (azerbaijan) limited

  Jan 2017 - Feb 2018

  Welding quality engineer
• 

  China petroleum engineering & construction corporation (cpecc)

  Jun 2018 - Jul 2021

  Welding engineer

  AGPP Project

• 

  Maire tecnimont

  Jul 2021 - Aug 2022

  Construction welding engineer
• 

  Cyberia group of companies

  Mar 2024 - now

  Quality and welding lead engineer