Taiseer Ibrahem

University of Khartoum

• Relevant modules: Thermodynamics, Heat transfer, Mass transfer, Process dynamics and control, Kinetics and reactor design.• Conducted a design project as part of a group collaboration. • Performed 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 including 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝗮𝗻𝗱 𝗲𝗻𝗲𝗿𝗴𝘆 𝗯𝗮𝗹𝗮𝗻𝗰𝗲 as well as the 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝘀𝗶𝘇𝗶𝗻𝗴 of the reactor, heat exchanger, and compressor.• Contributed to 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗺𝗼𝗱𝗲𝗹𝗹𝗶𝗻𝗴 using 𝗔𝘀𝗽𝗲𝗻 𝗛𝗬𝗦𝗬𝗦… Show more • Relevant modules: Thermodynamics, Heat transfer, Mass transfer, Process dynamics and control, Kinetics and reactor design.• Conducted a design project as part of a group collaboration. • Performed 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 including 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝗮𝗻𝗱 𝗲𝗻𝗲𝗿𝗴𝘆 𝗯𝗮𝗹𝗮𝗻𝗰𝗲 as well as the 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝘀𝗶𝘇𝗶𝗻𝗴 of the reactor, heat exchanger, and compressor.• Contributed to 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗺𝗼𝗱𝗲𝗹𝗹𝗶𝗻𝗴 using 𝗔𝘀𝗽𝗲𝗻 𝗛𝗬𝗦𝗬𝗦. Simulated the reactor, heat exchanger and compressor and compared the results to the manual calculations that I found using 𝗠𝗶𝗰𝗿𝗼𝘀𝗼𝗳𝘁 𝗘𝘅𝗰𝗲𝗹. 𝗢𝗽𝘁𝗶𝗺𝗶𝘀𝗲𝗱 the operation variables of the reactor.• Finalised the 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗱𝗿𝗮𝘄𝗶𝗻𝗴𝘀 ( PFD, P&ID ) using 𝗔𝘂𝘁𝗼𝗖𝗔𝗗. as well as the economic evaluation of the project. Show less

University of Nottingham

• Spent my master’s degree between the 𝗖𝗲𝗻𝘁𝗿𝗲 𝗳𝗼𝗿 𝗗𝗼𝗰𝘁𝗼𝗿𝗮𝗹 𝗧𝗿𝗮𝗶𝗻𝗶𝗻𝗴 𝗶𝗻 𝗥𝗲𝘀𝗶𝗹𝗶𝗲𝗻𝘁 𝗗𝗲𝗰𝗮𝗿𝗯𝗼𝗻𝗶𝘀𝗲𝗱 𝗙𝘂𝗲𝗹 𝗘𝗻𝗲𝗿𝗴𝘆 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 as well as the Chemical and Environmental Engineering Department.• Core modules focused on the social and the technical sides of decarbonisation.• Analysis of the contribution of the UK in tackling climate change. • Conducted 𝗰𝗮𝗿𝗯𝗼𝗻 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 over life cycle of industrial activities as… Show more • Spent my master’s degree between the 𝗖𝗲𝗻𝘁𝗿𝗲 𝗳𝗼𝗿 𝗗𝗼𝗰𝘁𝗼𝗿𝗮𝗹 𝗧𝗿𝗮𝗶𝗻𝗶𝗻𝗴 𝗶𝗻 𝗥𝗲𝘀𝗶𝗹𝗶𝗲𝗻𝘁 𝗗𝗲𝗰𝗮𝗿𝗯𝗼𝗻𝗶𝘀𝗲𝗱 𝗙𝘂𝗲𝗹 𝗘𝗻𝗲𝗿𝗴𝘆 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 as well as the Chemical and Environmental Engineering Department.• Core modules focused on the social and the technical sides of decarbonisation.• Analysis of the contribution of the UK in tackling climate change. • Conducted 𝗰𝗮𝗿𝗯𝗼𝗻 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗶𝗼𝗻𝘀 over life cycle of industrial activities as part of Renewable Energy from Wastes module.• Research Project investigated the scale-up potential of Polyethyleneimine-impregnated Silica-gel (𝗣𝗘𝗜/𝘀𝗶𝗹𝗶𝗰𝗮) for 𝗽𝗼𝘀𝘁-𝗰𝗼𝗺𝗯𝘂𝘀𝘁𝗶𝗼𝗻 𝗰𝗮𝗽𝘁𝘂𝗿𝗲 from natural gas fired power plant.• Relevant modules: Power generation and carbon capture, 𝗔𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝗰𝗼𝗺𝗽𝘂𝘁𝗮𝘁𝗶𝗼𝗻𝗮𝗹 methods, Multiphase systems, Rheology, 𝗥𝗲𝗻𝗲𝘄𝗮𝗯𝗹𝗲 𝗘𝗻𝗲𝗿𝗴𝘆 from Waste, Environmental risk assessments and Air pollution. Show less

Outreach Officer

Associated with Taiseer Ibrahem

Engagement and Outreach Officer

Associated with Taiseer Ibrahem