Experience

• 

  Can (offshore) ltd

  Jan 2000 - Sept 2006

  Ndt supervisor

  • Supervised and coordinated all NDT inspections on the cracking and olefin process units. • Ensured all NDT inspection deadlines were met and employed various techniques on pipe-work and vessels by assigned technicians• Safely working in confined spaces, working at height and sometimes with the use of rope access techniques.• Produced technical reports using computer aided drawings and downloading results into a plant corrosion monitoring system.• Achieved IRATA Levels 1 to 3 Site Safety Supervisor Industrial Rope Access status. As an advanced member of the inspection team, I was tasked with managing groups of up to 30 plus technicians. Show less

• 

  Murphy oil

  Sept 2006 - Jan 2015

  Production technician

  Responsible for the safe and efficient running of 5 process areas and associated units to the required health and safety regulations. which include:• Crude Unit• Hydrogen Desulphurisation, Amine Regeneration and distribution Unit, Sulphur recovery unit• Utilities - water treatment plant, Cogen & Boiler Plants, N2 & Air plants, Refinery Fire water system, Caustic distribution.• Isomerisation• Ultrafiner/Ultraformer and Virgin Distillation Unit* Experienced in the use of multi-stage compressors, multi-stage pumps (Centrifugal, reciprocating) electric and steam driven rotating equipment.• Ensuring the plant is running safely and efficiently. Practised in pressure/leak testing ,flushing and purging, commissioning and de-commissioning of process equipment.• Conduct regular routine readings of vessels and plant for levels, pressures, temperatures and flows.• Ensure Instrumentation correlation checks completed and documented carefully.• Taking routine samples and non-routine samples to the laboratory for analysis.• Carrying out unit water analysis following set procedures utilising chemical tests.• Re-route product rundowns – setting chemical injection rates to process run down rates. Re-aligning process feeds and run downs.• Reporting faults to supervision and raising corrective actions when necessary to ensure reliability. • Shut down equipment (pumps, compressors, turbines, furnaces, boilers, seperators etc.) and prepare them for routine and emergency maintenance work.• Start up equipment following completion of maintenance and carry out minor maintenance work when required.• Maintain a detailed shift log. Mentoring and training of junior technicians.• Management of contractors, auditing the Permit to Work System and safety STOP card assessment.• Safely working under COSHH with chemicals, acids, chlorines and caustics, also gases such as H2 and H2S. • Take part in safety tool-box talks and audits regularly. Show less

• 

  E.on uk

  Nov 2015 - Nov 2016

  Production operator

  Nov 2015 - Nov 2016 E.on UK CHP Process / Panel operatorEmployed as a Process Operator /Panel Controller on an E.on power generation plant. Efficiently running a 40Mw John Brown gas Turbine with 2 attached heat recovery boilers, which generate 126bar HP steam to power a 40Mw Mitsubishi Steam Turbine. With both Turbines producing 80MW of electricity it is then distributed into the national grid. The process generates excess IP & LP steam, which is then conditioned (temperature & Pressure) to be used by a manufacturing customer near the power facility. Show less

• 

  Worley

  Nov 2016 - Jul 2018

  Production technician

  July 2016 – Jul 2018 AmecFW / Worley Parsons Production TechnicianEmployed as a Production Technician at the onshore Spirt Energy North gas Terminal at Barrow in Furness. Experienced in the running of the Conoco Phillips Rivers unit which takes feed from offshore rigs, separating gas from the condensate/liquid, stripping the in-process methanol, compressing the gas then forwarding it on to the solvent/amine treatment unit for H2S stripping/removal. The gas is then forwarded to the North units where it is further treated. Once experienced on the Rivers unit I moved onto the North Morecambe terminal. using safety through knowledge. Working with equipment such as reciprocating product gas compressors, Nitrogen rejection unit, field gas compressor, Methanol Distillation and Condensate Stablisation processing plant (Liquid handling/seperation,) fiscal metering equipment, Dew Point absorbers, Fired Heaters, BASF CO2 removal unit and PIGing operations. Working towards performing, area, electrical and process isolation authority competencies. Show less

• 

  Bulldog offshore services ltd

  Jul 2018 - Feb 2020

  Production operator

  Jul 2018 – Feb 2020. Bulldog Offshore Services Ltd Production OperatorCurrently Employed as an Offshore Production Technician. Duties include plant checks and readings, Sampling, Isolations/de-isolations, Leak Testing and preparing plant/equipment for maintenance activities. Running all aspects of the plant/equipment on Asset areas – Utilities, Gas, Process, BLP (Bridge Link Platform) and MEG / TEG supply and regeneration areas. Fuel gas systems and compression equipment/systems. working competently under ISSOW. Show less

• 

  Petrofac

  Feb 2020 - now

  Senior production operator

  Employed as a permanent member of core crew staff on the Conoco Phillips / Chrysaor / Harbour Energy platform Britannia. As a senior Operator contract staff look to me for task guidance and training. My position also requires me to be involved with the safety aspects as well as the day to day running of a process area, such as auditing of P&ID line walks for verification and red lining, then sent for changes if required, second checking Isolation packs for planned work scopes and signing as a verifier, Lock open / Lock closed P&ID register surveys for annual HSE audits, producing Isolation packs with marked up P&ID’s and job step plans. Field verification on work parties, attending tool box talks when tasks are being carried out on my area. Participate in shift Gun drills/Emergency scenarios and procedure reviews. fully competent using all relevant computer based programs such as ISSOW, Microsoft and excel, also the companies OMS/BMS for latest revision P&ID’s, procedures/policies and all safety critical information for the asset. Show less